Instruction Manual for PHOINiKAS models including: Q5, 2AXQO-Q5, 2AXQOQ5, Q5 Wireless Over Ear Headphones, Wireless Over Ear Headphones
Zhong Tian Ding Sheng (Shenzhen) Industrial Co., Ltd Q5 Wireless Over Ear Headphones 2AXQO-Q5 2AXQOQ5 q5
File Info : application/pdf, 2 Pages, 3.46MB
DocumentDocumentQ5S 524*297mm148.6*105mm805RoHS2.0REACH
MODEL:Q5S 2.4Ghz Wireless Headset
Q5 2.4G
Button Operation Instructions
Button Function Operate
Step
Power /
Long press
Pairing Mode × 5s
°Power On: long press the power button for 5 seconds, the prompt sound "POWER ON"; °Power Off: long press the power button for 5 seconds, the prompt sound "POWER OFF"; °Pairing: Automatically search for pairing connection after power on
7.1 Sound
Click × 1 time The prompt sound "Surround Sound On / Surround Sound Off"
Led Light On / Off
Click × 2 time
Turn on by default, click 2 times to turn on/off
Mic On / Off
On / Off
°Adjust Up: open the microphone °Adjust Down: turn off the microphone
+
Volume + /
Roll
°Scroll up (+): Volume +
Volume -
Adjustment °scroll down (-): volume-
-
Notice: Plug in the charging cable and the headset will enter the shutdown state; When the headset is charging, it is forbidden to operate the button to turn it on.
Q&A
1. Q: After connecting to the PC, the headset has sound, but the volume cannot be controlled? A: Open "Control" and click "Sound Audio Device"; Click on the headphone device in the "Play" panel of the sound setting, set it as the default value and confirm (the default headset is the sound from the headset, and the default sound is the sound from the audio); There is no sound after the operation, please restart the computer.
2. Q: In wireless mode, what should I do if the sound of the headset is distorted or stuck? A: Check the source of the sound Disconnect other devices Re-pair the wireless gaming headset.
3. QWhen playing multiple players on the PC, the stuck operation fails, but the headset functions normally? A: Check the playback decoder; Please close multiple players; Check whether there are obstacles between the headset and the PC, which will affect the signal transmission between them.
Line-in
/7.1/
Type-c LINE-IN
40MM 16 800mAh 2 12
100mA 2.402GHz-2.480GHz 2MHz
15360 3.7V
-40±3dB 20MS
7 dBm 15360 -85 dBm
2.4G
PC/PS4/PS5/TV/Swith/
3.5mm
PC/Laptop/Appareil ios/ Appareil Android/PlayStation 4/ PlayStation 5/PS Vita/Xbox oneS/ 3.5
USB
Line in
PC
a) USB a) PC3.5mm
12
"Q5" b) Windows
b) --" """
PC"""
c) "
"
"""
PC""""
PS4
a) USB a) 3.5mm
PS5
b) PS4/PS5--" "--""--"
"--""
· 2.4G3.4V, ,"Battery low", 3.3V" Battery low" · · " "
3.5mm
/ 7.1
5 1
5"POWER ON"5, "POWER OFF"
"surround sound on/surroud sound off "
2
LED
+
++
/
--
-
1.PC ""
2. 1.2.3
3.PC 1.2.3.PC
Product Description
Power/7.1 sound/LED Light Status Indicator Mic On/Off Volume Adjustment Wheel
Product Details
Charging Indicator Type-C Interface LINE-IN Interface External Mic Interface
Horn diameter Speaker impedance Battery capacity Battery Type Charging time Battery life
40MM 16
Transmission distance 15 meters,360 degrees
Operating Voltage
3.7V
800mAh
Charging voltage
Polymer lithium battery Microphone sensitivity -40±3dB
2 hours
Microphone indicative Omni-directional
12 hours
Low latency
20MS
Transmitter parameters
100mA
2.402GHz-2.480GHz 2MHz
7dBm 15m, 360° -85dBm
Connection Mode of the Gaming Headset Connection Mode: 2.4G Wireless Mode
Compatible Devices:
PC/PS4/PS5/TV/Swith/Laptop
Operation Method:
Plug in the USB receive , plug and play
wired Mode (3.5mm )
PC/Laptop/Appareil ios/Appareil Android/PlayStation 4/PlayStation 5 /PS Vita/Xbox oneS/devices with 3.5 audio interface
Plug in the 3.5mm audio cable, plug and play
PC
Steps (First Use):
Laptop
PS4 PS5
Notice:
a) When using, insert the USB receive into the USB port of the computer, the blue indicator light of the receive flashes, and the"Q5" wireless headset device is displayed in the viewing device on the computer, indicating that the installation is successful; b) After the receive is inserted into the computer, the Windows system of the computer will be automatically connected without requiring the user to install the driver and run the software separately; c) When using the device for the first time, open the "Audio" of the "Sound and Audio Device Properties" of this device and s et it to default, turn off the PC "listening function" and click "Speaker" to adjust the volume.
a) For PC, please use 3.5mm 1 point 2 adapter cable b) For the first use, please set the "Audio" of "Sound and Audio Device Properties" on the computer as the default, turn off the PC "listening function" and click "Speaker" to adjust the volume."Speaker" to adjust the volume.
a) Insert the USB receive into the game device, and the blue indicator light of the receive flashes to be connected;
aInsert the 3.5mm audio cable into the game device; bOpen PS4/PS5 settings--select "peripheral devices"--select "audio devices"--select "output to headphones"--select "automatically switch output devices".
· In 2.4G wireless mode, the battery power is lower than 3.4V, the red light flashes quickly, and a "Battery low" prompt sound is issued. · The receivedoes not need to be paired, it can be used synchronously with the headset when it is plugged in; · If the receive is lost or damaged , please contact the merchant to purchase the same type of receive from the original factory. The new receive needs to be re-paired with the earphone and connected with the operation steps "Refer to the first use steps" and then re-match.
Please make sure that the audio cable is fully inserted into the gaming headset; Devices using Non-3.5mm interface require additional adapters;
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Adobe PDF library 16.03 Adobe Illustrator(R) 24.0