Quick Installation Guide

1. Connect to a Computer

Option 1: Directly

For Mac OS X:

1. Download the driver and utility from the product's Support page at www.tp-link.com.
2. Unzip the downloaded folder and run the Install.pkg.
3. Follow the on-screen instructions to complete the installation.

Option 2: Via the USB Extension Cable

(Diagram shows a USB adapter connected to an extension cable, then to a computer.)

Note: In Windows XP or Vista, a 'Found New Hardware Wizard' window may appear. Click 'Cancel' and proceed with the driver installation from the CD or downloaded files.

2. Install Driver

For Windows:

1. Insert the CD and run the Autorun.exe. Alternatively, download the driver from the product's Support page at www.tp-link.com.
2. Select your adapter and follow the instructions to complete the installation.

Note: If you encounter issues during driver installation, temporarily disable your antivirus software and firewall, then try again.

For Mac OS X:

1. Download the driver and utility from the product's Support page at www.tp-link.com.
2. Unzip the downloaded folder and run the Install.pkg.
3. Follow the on-screen instructions to complete the installation.

3. Join a Wireless Network

For Windows:

Option 1: Via Windows Wireless Utility

1. Click the network icon (e.g., Wi-Fi symbol) on the taskbar.
2. Select your Wi-Fi network, click 'Connect', and enter the password when prompted.

(Screenshot shows a list of available Wi-Fi networks with signal strength and connection status.)

Option 2: Via WPS Tool

(Note: This option is only available if your adapter has a WPS button.)

1. Press the WPS button on your router.
2. Within 2 minutes, press and hold the WPS button on the adapter until the WPS Tool opens.

(Screenshot shows the WPS Tool interface with options like 'Join Other Network', 'WPS Open', and 'Wireless Utility'.)

Option 2: Via Wi-Fi Protected Setup (WPS)

(Note: This option is only available if your adapter has a WPS button.)

1. Press the WPS button on your router.
2. Within 2 minutes, press and hold the WPS button on the adapter until the following window appears.

(Screenshot shows a WPS connection progress window.)

When the 'Success!' message appears, your computer is connected to Wi-Fi.

For Mac OS X:

Option 1: Via TP-Link Utility

1. Click '(TP-Link Utility)' on the menu bar or select the 'Site Survey' tab from the utility's pop-up window.
2. Select your Wi-Fi network and enter the Wi-Fi password when prompted.

(Screenshot shows the TP-Link Utility interface with network scanning and connection options.)

For detailed instructions, please refer to the User Manual available on the product's Support page at www.tp-link.com.

© 2021 TP-Link. 7106509432 REV2.1.0