Honeywell Atlanta D142
Quick Start Guide
DOORBELL | GONG | CARILLON DE PORTE | TIMBRE DE PUETRA
Model Information
Model: D142
Step 1: Install Batteries
Diagram 1 shows the doorbell unit. An arrow [▶️] indicates opening the battery compartment cover.
Internal battery holder: This compartment is designed to hold batteries.
This compartment requires 1.5V 'AA' batteries.
ATTENTION! ?
Check battery orientation: ✔️ ❌
Battery compartment status: ✔️
Step 2: Connect Transformer
Diagram 2 illustrates the wiring connections for the doorbell system.
The symbol 'T' represents the Transformer.
Connect the transformer to the doorbell unit using the indicated terminals.
Transformer specifications: 8-16V [AC voltage symbol], 220-240V [AC voltage symbol].
Compatible Honeywell Transformer models: D753, D780.
The system connects to a 220-240V [AC voltage symbol] power source.
Wiring connections are verified with ✔️ symbols.
The diagram shows positive (+) and negative (-) terminals for battery and transformer connections.
Support and Compliance
For troubleshooting assistance, please refer to the relevant support resources.
Visit: livewell.honeywell.com
CE marking indicates compliance.
Document revision: 32321868-002 Rev. A
