Dreo Evaporative Air Cooler

IMPORTANT SAFETY INSTRUCTIONS

READ ALL CAUTIONARY MARKINGS ON THE APPLIANCE AND SAFETY INSTRUCTIONS IN THE USER MANUAL BEFORE USE.

? Do not cover the air inlet and outlet while in operation. ⚠️? Do not use the cooler near flammables and combustibles.

General Safety

1. Cleaning and maintenance shall not be performed by children without supervision.
2. Use the appliance as described in the user manual only. Any other use not recommended in the user manual may cause fire, electrical shock, or personal injury.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
4. Do not place the unit under high temperature or low temperature. In summertime, the water may deteriorate and cause odor; please add freshwater in time. In wintertime, when indoor temperature is below 32°F, please add warm water into the humidifier if you want to use it. After operation, please use a towel to dry the water tank.

Operation Safety

1. Place the appliance on a flat, dry surface before use.
2. Do not immerse in water or any other liquids.
3. Do not use the appliance until the base is installed.
4. Do not insert your fingers, pencil, or any other objects into the grilles under any circumstances.
5. Do not dismantle, repair, or modify. All servicing should be performed by qualified personnel.
6. When operating the product, do not place the power cord at the air outlet or let the power cord connect the surface of product which is close to the air outlet.
7. After the unit is filled with water, don't tilt or crash it when placing or moving the unit. If it is necessary to move the unit, please move it slowly to avoid overflowing. Tilting the unit during operation is prohibited. If the product is tilted and there is water in it, pull off the power plug immediately. Wait until the unit is completely dry and then you may turn on the unit. Or you may contact professional after-sales personnel to deal with it.
8. When turning on the humidification function, do not operate it in an enclosed space for a long time to prevent high humidity.
9. Include instructions pertaining to a risk of fire, electric shock, or injury to persons, for cleaning and user-maintenance, such as lubrication.
10. Warn the user to unplug or disconnect the appliance from the power supply before servicing.

Electricity Safety

1. Do not bend the power cord or put heavy objects on the power cord.
2. Make sure that the voltage of your electricity supply is the same as that indicated on the appliance.
3. Always unplug before cleaning or leaving the appliance unused for a long period of time. Keep your hands dry when plugging/unplugging.
4. Do not operate the appliance with a damaged cord or plug or after the appliance malfunctions, has been dropped or damaged in any manner.
5. Do not run the cord under carpeting, furniture, or electrical devices. Do not cover the cord with throw rugs, runner rugs, and other similar rugs. Keep the cord away from traffic areas to avoid tripping hazards.
6. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
7. This appliance employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions and check the appliance. If the replacement fuse blows, a short-circuit may be present and the appliance should be discarded or returned to an authorized service facility for examination and/or repair.
8. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

FOR HOUSEHOLD USE ONLY

READ AND SAVE THESE INSTRUCTIONS

? Gentle Reminder: Check the appliance regularly and refer to the troubleshooting section in page 18 or contact our customer support if it shows any of the following signs:

• Power cord or plug is damaged.
• Loud noise, unusual smell or excessive heat.

ASSEMBLING YOUR AIR COOLER

Package Contents

The following items are included in the package:

• Remote Control (battery included)
• User Manual
• Quick Start Guide
• Ice Packs

Product Diagram Description: The main unit features a LED display and control panel at the top, an air outlet grille, a water level indicator, and a power cord and plug. The base is shown detached, with two halves that connect.

Parts Diagram Description: The unit is shown disassembled into its main components: a carry handle, a cooling pad, a rear grille, a fan wheel, and a water tank.

Assembly Instructions

When using the appliance for the first time, remove the wraps and attach the parts by following the steps below.

1. Insert the edges of both base halves into each other and snap together until they click.
2. Run the cord through the center hole.
3. Insert the base onto the bottom of the appliance by aligning the pegs (short) and slots (beneath the sign) and twisting the base counterclockwise until it clicks.
4. Thread the cord through the rear cord keepers before putting the air cooler upright.

CAUTION:

• Do not operate the air cooler if the base has not been installed.
• Make sure to thread the power cord through all cord keepers.

KNOWING YOUR AIR COOLER

LED Display / Control Panel

The control panel features various indicators and buttons:

• Indicators: Oscillation Indicator, Timer Indicator, Humidifying Indicator, Timer/Speed Indicator, Sleep Mode Indicator, Normal Mode Indicator, Mute Indicator.
• Buttons:
  • Humidify Button [?]: Select to increase air humidity.
  • Timer Button [⏱️]: Set a time for auto on or off (0-7h).
  • Mode Button [☰]: Short press to switch between normal and sleep mode.
  • Oscillation Button [?]: Adjust airflow direction.
  • Power Button [?]: Turn power on/off.
  • Fan Speed Button [?]: Adjust airflow volume (1-3 levels).

Specifications

USING YOUR AIR COOLER

General Operations

1. Press the power button [?] to turn on the air cooler.
2. Press the mode button [☰] to choose a working mode:
   • Normal Mode (1️⃣): Standard performance with constant airflow. Display turns off automatically after 1 minute.
   • Sleep Mode (?): Display turns off automatically after 5 seconds. Fan speed decreases by one level every 30 minutes. (Note: fan speed can auto-decrease by two levels only and will remain constant if it reaches level 1).
3. Press the fan speed button [?] to adjust the airflow volume.
4. Press the oscillation button [?] to change the airflow direction (up to 80°).
5. Press the power button [?] to turn off the air cooler.

Getting the Most out of Your Air Cooler

Cooling Process Description: The air cooler cools the air through the evaporation of water. When hot air passes through the cooling pad, the flowing water extracts heat and evaporates, producing fresh and cool air, released by the fan wheel in front. Components shown: Water Distributor, Cooling Pad, Fan Wheel, Water Tank.

Tips for Optimal Cooling:

• Add ice packs [?] to the water tank for better cooling.
• Remove any tall obstacles that might block the airflow from the cooler.
• Combine with your AC unit to get cooler air throughout the room.
• Use as a tower fan with the humidify function switched off.

Note: This is not an air conditioner.

Additional Features

Auto On/Off Timer (1-7H)

When on standby, press to set a timer for auto start. When running, press to set a timer for auto shutoff. To cancel, set the timer to 0 hour.

Mute

• Method 1: Press the mute button [?] on the remote control to turn on/off mute.
• Method 2: Long press the mode button [☰] on the control panel to turn on/off mute.

Low Water Alert

When the humidifying indicator keeps blinking, please add water into the tank and re-enable the humidity function. Low water alert will also be activated when the water tank is withdrawn during humidifying. Low water alert will not be activated when the humidify function is off.

Display Auto Off

In normal mode, the display will turn off automatically after 1 minute. In sleep mode, the display will turn off automatically after 5 seconds. Wake up the display with any non-power button.

Memory

If you turn off the appliance, it will return to the previous settings (except for the timer setting) once you press the power button again. Note: If the cooler is unplugged or loses power, the mute function will not be remembered.

Auto Shut Off After 15 Hours

For safety reasons, the air cooler will shut off automatically after continuously running for 15 hours.

Remote Control

The remote control has buttons for Humidify [?], Mode [☰], Oscillation [?], Power [?], Fan Speed [?], Mute [?], and Timer [⏱️].

Battery Replacement

Note: If the indicator on the remote control doesn't turn on any more, please consider replacing the battery.

1. Press the locking button to pop out the battery holder.
2. Replace with the same battery type (CR2025 3V), ensuring the (+) side faces up.
3. Push the holder in until securely locked into place.

Filling the Water Tank (2 Methods)

Caution: Disconnect from power source before filling the water tank.

Method 1

1. Press between the recesses and horizontally pull out the water tank.
2. Fill the tank with clean water, up to the max indicator.
3. Return the water tank to its original position.

Method 2

1. Press between the recesses and horizontally pull out the water tank.
2. Press the black tabs inwards to release the water pump.
3. Fill the tank under a water supply, up to the max level.
4. Align and lock the tabs back into place.
5. Return the water tank to its original position.

Using the Ice Packs (Optional)

For better cooling, this air cooler includes 2 ice packs that can be frozen and used repeatedly. Turn off the appliance and unplug before adding or removing the ice packs.

1. Freeze the ice packs in the refrigerator for at least 4 hours.
2. Pull out the water tank and add in the ice packs. Ensure water+ice packs do not exceed the max level.
3. Push the water tank back into place.

WARNING:

• Do not open or puncture the ice pack.
• Do not eat or drink the contents inside.

TROUBLESHOOTING

• Q1: My air cooler won't turn on.
  A1: Make sure that the cord is connected to a powered outlet and the mains voltage corresponds with the voltage indicated on the cooler.
• Q2: My air cooler is shaky and wobbling.
  A2: Place the air cooler on a flat, level surface. Incorrect assembly might also cause shakiness. Please refer to the assembly instructions in page 7. Note that the power cord must be run through all keepers.
• Q3: My air cooler is making vibration and noise.
  A3: Place the air cooler on a flat, level surface. Be sure not to insert anything into the grilles.
• Q4: My air cooler is not cool enough.
  A4: Turn on the humidify function and ensure that the water is above the minimum mark. Put ice packs into the tank for better cooling. Note that this is not an air conditioner. Combine with your AC unit to circulate air more efficiently.
• Q5: Water is dripping from my air cooler.
  A5: Ensure the proper installation of the cooling pad, rear grille, and water tank. The water must not exceed the max level.
• Q6: My humidifying indicator is blinking, but I already added water into the tank.
  A6: Make sure to return the tank securely in place and re-enable the humidify function. Note that when the water is low or the tank is withdrawn during humidifying, the humidify function will be disabled for safety protection.

If your problem is not listed or still persists, please contact our customer support at support@dreo.com.

MAINTENANCE & SERVICE

CAUTION:

• Always unplug before any cleaning or maintenance.
• Do not immerse in water or get water inside the motor.
• Do not use any chemical agents when cleaning the cooler.
• Store in a cool, dry place and cover it to protect from dust.

Outer Surface

Gently wipe off the dust with a soft, damp cloth.

Water Tank

Clean mineral buildup in the water tank at least once every two weeks to maintain proper hygiene.

1. Detach the water pump from the water tank (see page 16).
2. Remove the water tank and clean with cleaning agents.
3. After the cleaning, lock the water pump back into place. Return the water tank to its original position.

Filter on Water Pump

To maintain optimal performance of the water pump, please clean the filter on a regular basis.

1. Pull out the water tank.
2. Press the black tabs inwards to release the water pump.
3. Slide out the filter from the pump and rinse it with water.
4. Slide the filter back and return the water tank to its original position.

User Servicing Instructions (Fuse)

This appliance features a fused safety plug that protects against overload or short-circuit situations. If the fuse blows, please follow the below instructions or consult a qualified electrician.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
3. Remove fuse carefully. Push the fuse from the other side to remove the fuse.
4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

WARNING: Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

Default 12-Month Warranty

This appliance is covered by Dreo warranty for 12 months from the date of its original purchase. During this period, in the unlikely event that this appliance is defective or malfunctions due to faulty workmanship or manufacturing, you will get exchange at no cost.

Extend Your Warranty

Extend your warranty by registering your new appliance on our website https://dreo.com/warranty. This will confirm ownership of your Dreo appliance in the event of expiry of the warranty period, and enable us to contact you if necessary.

The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.
• Any unit that has been tampered with or used for commercial purposes.
• Normal wear and tear of wearable parts.
• Use of force, damage caused by external influences.
• Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or noncompliance with the instructions.
• Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by Dreo.

We can only provide after-sales service for products that are sold by Dreo or Dreo authorized retailers and distributors. If you have purchased the appliance from a different place, please contact your seller for return and warranty issues.

We're Here to Help!

If you have any questions or encounter any issues regarding your Dreo appliance, feel free to contact our Customer Support anytime. Your satisfaction is our first priority!

? (888) 520-3736 | ? www.dreo.com | ✉️ support@dreo.com

Mon - Fri, 9:00 am-5:00 pm PST/PDT

* Please have your order confirmation number ready before contacting Customer Support.

Connect with Us

Scan or visit dreo.com/warranty to connect with us and explore top tips and new ideas. Ask us anything and we're always ready to help. @Dreo

Manufacturer Information

www.dreo.com

Shenzhen Hesung Innovation Technology Co., LTD

26F, Bldg A7, Creative City, Shenzhen, China

MADE IN CHINA

ETL LISTED | Intertek | 3189196