Before Use
Thank you for choosing this product. Please read the following information carefully:
- This product is designed to be used with the original adapter provided in the package.
- The built-in battery inside the product is only for time backup in case of a power outage.
- Please follow the instructions to set up the product.
We hope you have a nice experience using our product.
Precautions:
- Do not expose the unit to extreme temperatures, direct sunlight, dust, or humidity.
- A cloth or other protective material should be placed between the clock and the furniture.
- Plug off the power before cleaning the clock with a soft cloth moistened only with mild soap and water.
- You must use the original adapter.
- Do not disassemble the clock or touch any components.
Chapter 1: Diagram
The Projection Alarm Clock features the following components:
- 1. FM Radio
- 2. Digit Decrease (▼)
- 3. Digit Increase (▲)
- 4. Snooze/Display Button (Zz⏱)
- 5. Time Setting (⚙)
- 6. Projection Button (📷)
- 7. Projection Lens
- 8. Projection Pillar
- 9. USB Charging Port
- 10. Type-C Power Supply Port
- 11. Radio Volume Adjustment (⏸)
- 12. Display Brightness Adjustment (💡)
- 13. Alarm Volume Adjustment (⏸)
- 14. Alarm Setting (⏰)
- 15. Antenna
- 16. Reset Hole
Chapter 2: Time Setting
Alarm Time Setting
In time display mode:
- Long press ⚙ to enter HOUR setting.
- Short press ▼/▲ to adjust the time; long press to quickly adjust.
- Short press ⚙ again to enter MINUTE setting.
- After setting is finished, short press ⚙ to save.
Example: 7:30 → (Flash) 12:20 → (Long Press or Short Press) ▼ or ▲ 12:20 → (Save the set up)
12/24-Hour Time Format Conversion
In time display mode, short press ⚙ to switch between 12 and 24 hour format. The setting is automatically saved after 3 seconds.
Chapter 3: Alarm Setting
Alarm Time Setting
In time display mode:
- Long press ⏰ to set alarm 1.
- Short press ▼/▲ to set HOUR; long press to quickly adjust.
- Short press ⏰ again to set MINUTE.
- Short press ⏰ to save settings.
NOTE: Setting steps for alarm 2 are the same as for alarm 1.
Example: (Flash) → 12:20 → (Long Press) ▼ or ▲ ⏰ → (Flash) 12:20 → (Save the set up)
Alarm Ringtones Setting
- In time display mode, short press ▼/▲ to choose ringtones. Short press it again for the next ringtone. When setting, the display will simultaneously show the corresponding icons: 01, 02, 03, BU (Buzzer), and RD (Radio). The last ringtone chosen will be the alarm ringtone.
NOTE: If the FM radio is set as the alarm ringtone, the last radio channel listened to will be the alarm ringtone.
Snooze Mode
When the alarm rings, short press Zz⏱ to temporarily stop the alarm for 9 minutes. The alarm will go off again after 9 minutes' snooze.
Turn off the Alarm
- When the alarm rings, short press any button except Zz⏱ to turn off the alarm. The alarm will go off on the next day.
- Short press ⏰ or ⏸ to turn off the alarm permanently, and the display will not show the ⏰ or ⏸ icons.
Deactivate the Alarm
Press the ⏰ or ⏸ button on the back of the clock. The alarm icon on the display will disappear, and the alarm will never go off.
Chapter 4: FM Setting
FM Station Searching
- Short press ⏸ to turn on/off FM radio. Long press ▼/▲ to manually search radio channels.
NOTE: Long press ⏸ will automatically search and save up to 30 channels when used for the first time.
- When listening to the radio, short press ▼/▲ to switch saved radio channels.
- Adjust FM volume via the ⏸ button on the back.
FM Sleep Mode
- In radio mode, short press ⏸ to enter FM sleep mode. Press it again to set sleep time (5, 15, 30, 45, 60, 75, 90 minutes).
- After setting, short press ⏸ and the display will show the remaining sleep time.
NOTE: The FM radio will automatically turn off after the sleep time is finished.
Example: ⏸ 106.2 → ⏸ → 05 → (Automatic saved)
Chapter 5: Projection
Brightness Adjustment
In time display mode, short press 📷 to turn on the projection. Short press again to adjust projection brightness (Low-Medium-High-OFF). Long pressing 📷 can flip the time projection 180 degrees.
Note:
- The best projection distance is from 0.5m to 3m. Please maintain the projection distance in this range.
- The projection cannot be used in a strong light environment, as the projection brightness may be weak during the day.
- After a power outage, the projection brightness and display direction will be the same as the last time.
Projection Setting
In projection mode, rotate the projection pillar to adjust the projection angle from -90 degrees to 90 degrees.
Example: Short press 📷 6:00 → (Rotate pillar) → 6:00 → (Long press 📷) → 6:00
Chapter 6: Display Brightness Setting
- Steplessly adjust display brightness via the 💡 switch on the back.
- Long press Zz⏱ to turn on or off the display. The projection brightness will not change.
Note: If the display brightness is adjusted to low before sleeping, please adjust it to the highest via 💡 on the next day.
Chapter 7: USB Charging Function
- The Type-C ⚡ port on the back is used for the power supply of the clock.
- The USB ⚡ port on the side is used for charging your phone, tablets, etc.
Note: Please use the original adapter while charging.
Chapter 8: Specifications
| Input | 5V=1.5A | USB Output | 5V=1.2A(Max) |
|---|---|---|---|
| Projection Angle | -90°~90° | Projection Distance | 0.5-3m |
| Projection Brightness | 3 levels | Alarm Ringtones | 4 ringtones + FM radio |
Chapter 9: Package Contents
The package includes:
- Alarm Clock x1
- Charging Cable x1
- Adapter x1
- User Manual x1
FAQ
How to set up the projection correctly?
- First, determine the clock screen orientation.
- Rotate the projection column and the screen in the same direction.
- Press and hold the projection button for 3 seconds to rotate the projection 180 degrees on the ceiling.
The best projection distance is between 0.5m and 3m. Please keep the projection distance in this range.
Here are some tips for FM function:
- Enter FM settings, press and hold the radio button. The FM radio will automatically search and save up to 30 radio stations when used for the first time.
- If you want to change the saved 30 radio stations, reset the clock and then search for radio stations again.
- Reset the clock to clear the record. There is a "RESET" hole on the back of the clock; use a needle to poke it.
- FM stations cannot be saved manually; they must be searched automatically. If the desired station is found, it can be saved!
How do you reset the clock?
Insert a needle into the RESET HOLE on the back. The clock will be reset and restore factory settings. The time will be displayed as AM 12:00.
Why does the clock not get FM radio signals?
- Make sure that the FM antenna on the back is completely untied.
- Check whether the location is remote and whether other signal receptions are normal.
- Move the clock to an open space to check whether it can receive signals.
- Check if there are any interference signals or devices affecting the signal, such as mobile phones, keys, and so on.
Correct Disposal of this Product
♻ This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return a used device, use the return and collection systems or contact the retailer where the product was purchased. They can facilitate environmentally safe recycling.
WARNING: Chemical Burn Hazard
Do not ingest the battery. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment is not closed securely, stop using the product and keep it away from children. If batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
This appliance can be used by children over 8 years old, and children shall not play with the appliance.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
FCC Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 0cm between the radiator and the user's body.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.