Vivint Pro Display

Overview

The Vivint Pro Display is a touchscreen device that provides access and control of a Vivint Smart Home system. The display communicates with the Vivint Smart Hub, enhancing usability by allowing users to perform security and automation functions via onscreen menus. Its streamlined design allows installation on a wall, desk, or tabletop in any room for extended system control.

The touchscreen interface controls all system functions, including arming/disarming security, viewing/clearing alerts, and configuring peripheral devices like sensors, locks, and cameras. It also displays time & weather, and real-time status of the network, power, sound, and system security. Integrated speakers and microphones enable two-way talk with Vivint Monitoring, audible doorbell rings, system countdowns, sensor status sounds, and alarm siren functionality. A downcast LED light indicates the security system status. Emergency features are accessible via an Emergency icon on the status bar.

This document includes a product description, illustrations, basic operation/functionality, installation instructions, technical specifications, standards listings, and regulatory compliance references.

Pro Display (Front View)

Front View Components:

• Ambient Light Sensor (ALS)
• Motion Sensor
• Dual Microphone
• Touchscreen Display
• Speaker
• Status Indicator (Downcast Light)
• Reset Button

Pro Display (Back View)

Back View Components:

• Backup Battery
• Tamper Switch
• Micro USB Port (Service Only)
• Power Connectors
• Reset Button
• Status Indicator (Downcast Light)

Vivint Address: 4931 N 300 W Provo, UT 84604

Operation Overview / User Functionality

The Display Pro works with the Smart Hub. Once installed, paired to the hub, and connected to the network, users can access system features via the touchscreen. The hub monitors and manages the integrated smart home system, including security sensors, detectors, and automation devices. The display provides critical status information, alerts, and activity history, allowing access to video, audio, and emergency features, arming/disarming security, configuring devices, and customizing display settings.

Main Features

• Arm and disarm the security system (Stay & Away Modes).
• Check system status and view activity history.
• Activate alarms with the Panic, Emergency, and Fire buttons.
• Talk with Vivint Monitoring Station using two-way talk.
• Acknowledge and clear alert notifications.
• Add, configure, and control smart home devices and users.
• Configure unique display and sound settings.

Technical / Hardware Specifications

Standards Certifications and Listings

For complete regulatory compliance information, visit: vivint.com/fcc.

UL Certified

Installation Instructions Outline

This outline provides a high-level summary of installing the Pro Display touchscreen device. It can be mounted on a wall or a flat surface. For best results, place the display near the control hub for a strong Wi-Fi connection.

To mount the display on a desk/table top:

Note: Requires the desktop mount back plate with built-in power supply.

1. Determine installation location (near an unswitched wall outlet).
2. Remove tape from backup battery wire and insert the battery connector.
3. Place the display on the desktop mount back plate. Align clasps, push unit flush, then slide down to secure. Power connectors will make contact.
4. Power on the display by plugging in the power supply. Pair the display to the hub and add it to the network (see procedure below).

Desktop Mount/Stand Back Plate Diagram Description: Shows the stand supporting the display, with connection points for power and mounting.

To mount the display on the wall:

1. Determine installation location (near an unswitched wall outlet).
2. Use the wall mount back plate to mark screw holes and wiring access. Drill the wiring hole, being careful of pipes/electrical and ensuring a strong Wi-Fi signal to the hub.
3. Route the power supply cable from the outlet to the mounting location, pushing wires into the back plate's terminal plug (polarity not required).
4. Attach the back plate to the wall using provided screws (use anchors if necessary).
5. Remove tape from backup battery wire and insert the battery connector.
6. Power on the display by plugging in the power supply. Pair the display to the hub and add it to the network (see procedure below).
7. Place the display on the back plate. Align clasps, push unit flush, then slide down to secure.

Wall Mount Back Plate Diagram Description: Shows the plate for wall mounting, with screw holes and a channel for cable routing.

Pairing the Pro Display to the Smart Hub (Adding it to the Network / System)

Before the display functions as a system interface, it must be paired wirelessly to the hub and connected to the local network.

1. Power on the display near the hub.
2. At the Setup screen, press the button icon, then press and hold the '0' button on the hub keypad. The hub LED light bar will flash white (AP mode).
3. At the Hub Found screen, press the button icon. Enter the provided PIN at the keypad to connect to the hub. Select the home Wi-Fi network and enter the password. The display and hub will exchange credentials, disconnect, and then connect to the local network as paired devices.
4. Once connected, the display configures and boots to the Home screen with full functionality (this may take a few minutes).
5. The Home screen displays system status, monitoring, and interaction capabilities similar to the hub.

Wireless Product Notice

Wireless communication hardware provides reliable communication, but has limitations:

• Transmitters comply with applicable wireless rules and regulations, with limited transmitter power and range.
• Wireless signals may be blocked by radio signals near the operating frequencies.

FCC and ISED Canada Regulatory Compliance Declarations

CAUTION: Unauthorized changes or modifications could void the user's authority to operate the equipment.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

These limits provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used per instructions, it may cause harmful interference to radio communications. Interference is not guaranteed not to occur in a particular installation. If interference occurs, try correcting it by:

• Reorienting or relocating the receiving antenna.
• Increasing separation between the equipment and the receiver.
• Connecting the equipment to an outlet on a different circuit than the receiver.
• Consulting the dealer or an experienced radio/television technician.

This device meets other requirements in FCC Rules Part 15E, Section 15.407: (i) devices for operation in the 5150-5250 MHz band are for indoor use only.

PRUDENCE: Changements ou modifications pourraient annuler le droit de l'utilisateur à utiliser l'équipement non autorisées.

Conformément à la réglementation d'Industrie Canada, cet émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Ces limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut émettre une énergie de radiofréquence et, s'il n'est pas installé et utilisé conformément aux instructions, il peut causer des interférences nuisibles aux communications radio. Cependant, il n'existe aucune garantie que des interférences ne se produiront pas dans une installation particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou télévision, ce qui peut être déterminé en mettant l'équipement hors et sous tension, l'utilisateur est encouragé à essayer de corriger l'interférence par une ou plusieurs des mesures suivantes:

• Réorienter ou déplacer l'antenne de réception.
• Augmentez la distance entre l'équipement et le récepteur.
• Connecter l'équipement à une sortie sur un circuit différent de celui sur lequel le récepteur est branché.
• Consulter le revendeur ou un technicien radio/télévision expérimenté pour de l'aide.

Le guide d'utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment: Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage.

FCC (U.S.) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.

IC (Canada) Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 30 cm between the radiator and your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 30 cm entre le radiateur et votre corps.