NISSAFORS

Step 1: Prepare the base

Ensure you have a clear workspace. Do not assemble on a soft surface that could damage the parts.

Diagram Description: Shows two ways to handle parts, one with a cross indicating incorrect handling and another showing correct placement on a flat surface.

Step 2: Attach side supports

Diagram Description: Shows a person holding a part and looking confused, then another person assembling two parts together, followed by a visual of the IKEA logo and a person on the phone.

Step 3: Assemble the first shelf

Diagram Description: Illustrates attaching two side pieces to a perforated shelf. Close-ups show how to align and insert the pieces, with a warning symbol indicating incorrect insertion.

Action: Insert the side supports into the shelf. Ensure they click into place.

Step 4: Secure the first shelf

Diagram Description: Shows the assembled shelf from Step 3. A close-up indicates inserting screws (Part ID: 10036588) into pre-drilled holes. The action is confirmed with a 'CLICK!' sound effect.

Action: Secure the shelf with 4 screws.

Step 5: Attach vertical supports to shelves

Diagram Description: Shows the assembly of vertical supports to the shelves. The Allen key (Part ID: 190094) is used with screws (Part ID: 190419) to attach the supports. There are two sets of instructions for attaching these, with a close-up showing the correct way to insert the screw and a cross indicating the incorrect way.

Action: Use 8 screws (Part ID: 190419) and the Allen key to attach the vertical supports to the shelves.

Step 6: Attach remaining shelves

Diagram Description: Similar to Step 5, this shows attaching the remaining shelves using the Allen key (Part ID: 190094) and screws (Part ID: 190419). The process is repeated for the other shelves.

Action: Use 8 screws (Part ID: 190419) and the Allen key to attach the remaining shelves.

Step 7: Final tightening

Diagram Description: Shows the partially assembled cart. A close-up demonstrates using the Allen key (Part ID: 190094) to tighten 16 screws, securing all the shelves to the frame.

Action: Tighten all 16 screws securely.

Step 8: Attach casters

Diagram Description: Shows the fully assembled cart frame. The casters (Part ID: 10005274) are shown being attached to the bottom of the cart. A 'CLICK!' sound effect indicates successful attachment.

Action: Attach the 4 casters to the bottom of the cart. Ensure they click into place.