ASSEMBLY INSTRUCTIONS
Version: 24-04-02
Tools and Preparation
Tools Required
? Phillips Screwdriver (Not included)
??? 2 Persons Recommended
Assembly Rating
The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
Rating: [Easy] ● ● ● ● ○ [Difficult]
Check Before Starting
- ✔️ Are you missing anything? Double-check all parts, hardware, and accessories listed on Page 6 are accounted for.
- ✔️ Should we send any replacements? Are there any irregularities or flaws in the parts? Replacements can be sent.
- ✔️ Check out our Quick Tips! Review the pre-assembly handouts.
- ✔️ Prep Time! Review the assembly instructions and diagrams before assembling. Set up your workspace by laying out parts and hardware separately.
Pre-Assembly Introduction and Tips
Building ready-to-assemble furniture can be challenging. Helpful tips are provided to speed up the process.
Teamwork
?♂️➡️? ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
Suitable Location
? Assembling near the intended location is highly recommended.
Sufficient Space
↔️ Ensure enough space to move around during assembly.
Avoid Scratches
?️ Use cardboard, blankets, or a carpeted area while assembling furniture to prevent scratches.
Flat Surface
— Make sure the furniture rests on a flat and level surface with each leg evenly touching the floor.
Assembly and Care Advice
⚠️ FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Part Installation
? Position each part correctly and insert screws or bolts into their respective holes.
Tool Usage
? Use appropriate hand tools or power tools for assembly. Some steps, like tightening screws/bolts, may require hand tools to avoid damage.
Tightening
? Turn clockwise to tighten. Only tighten when a step is completed or instructed.
Maintenance
?️ Save the instructions and store any supplied tools for later maintenance.
Post-Assembly Check
? After two weeks, check and tighten any loose hardware. Repeat this check every six months thereafter.
Important: It is the user's responsibility to maintain the furniture. Hardware may loosen over time, causing instability and potential collapse, which can lead to serious injury.
Product Details
Nightstand
Note: Please keep these instructions for future reference. Check the quantity and condition of parts and hardware before starting assembly.
Parts
- Part 1: Nightstand - Quantity: 1 pc
- Part 2: Leg - Quantity: 4 pcs
Hardware
- Hardware A: Pan Head Screw - Quantity: 16 pcs (Specifications: m3.5 x 16mm)
Assembly Steps
Step 1: Prepare Parts
Remove parts from the hidden compartment.
- Part 1 (Nightstand) x1 pc
- Part 2 (Leg) x4 pcs
Diagram Description: A nightstand unit is depicted. A box labeled "Hardware Pack" is shown, containing various hardware components. An arrow indicates the parts are associated with this pack.
Step 2: Attach Legs
Note: Place the nightstand in an upside-down position as shown.
Align each Leg (Part 2) to the base of the Nightstand (Part 1) and secure using Screw #A. Use two screws per leg.
Diagram Description: The nightstand is shown upside down on a soft surface. A leg is positioned at a corner of the base. An exploded view illustrates two screws being inserted through holes in the leg into the pre-drilled holes of the nightstand base. Text indicates "Line Marking" for alignment.
Assembly Completion
Assembly Complete
✔️ Please ensure the furniture rests on an even and flat surface. If the product wobbles or feels loose, double-check that all bolts and/or screws are properly tightened and secured.
Keep This Handy
?️ Please retain this instruction manual and any order-related information for future reference.
Lift, Don't Drag!
⬆️ To avoid damage, always LIFT the product when transporting or adjusting its placement.
Usage Note: This product is intended for RESIDENTIAL USE ONLY and not for commercial use.
