PLASTER New Masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
12 hours ago — PLASTER New Masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
Finishes for Interior Walls PRODUCT CODE 0074 Apcolite Premium Satin Emulsion Apcolite Premium Satin Emulsion provides rich Satin finish with high washability and excellent stain resistance. PRODUCT BENEFITS Rich Satin finish Apcolite Premium Satin Emulsion offers rich Satin finish which means your walls get a Luxury look. Advanced Stain Guard Ensures Lower stain pick up & easy cleanability for different kind of household stains. High Washability The film can withhold 65000 wash cycles which makes it is the perfect emulsion for high trafic walls. Anti Fungal The Biopack in Apcolite Premium Satin Emulsion protects surfaces from Black spots and retains the beauty of your house! WATER BASED * All Asian Paints products contain no added Lead, Mercury, Arsenic or Chromium from April 2008. PRODUCT FEATURES WASHABILITY COLOURS AVAILABLE COVERAGE BEST IN CLASS HIGH MEDIUM LOW 1530* *Currently available in more than 1530 shades as per the Asian Paints Colour Spectra. AVAILABLE PACKS FINISH On normal masonry surface after brushing 1 COAT 180 - 220 sq.ft/ltr** 1 ltr 4 ltr 20 ltr Shelf life: 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat. HOW TO APPLY PRE PAINTING STEPS MATT LOW SHEEN HIGH SHEEN HIGH GLOSS SILKY SMOOTH Refer to sheen levels in technical details 2 COATS 95 - 115 sq.ft/ltr** ** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity. PAINT APPLICATION PROCESS PLASTER New Masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces. CLEANING Surface should be free from any loose paint, dust or grease. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness. FILLING FOR CRACKS For filling masonry upto 3mm use Asian Paints SmartCare Crack Seal. FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3. Apcolite Premium Satin Emulsion should not be applied on surfaces/ substrates that are subjected to continuous seepage or dampness. APPLICATION STEP 1 SANDING STEP 2 DECOPRIME (ST) PRIMER / BRUSH / SPRAY CODE 0359 STEP 3 ACRYLIC WALL PUTTY PUTTY KNIFE STEP 4 SANDING STEP 5 DECOPRIME (ST) PRIMER / BRUSH / SPRAY 1354 0359 STEP 6 SANDING STEP 7 FIRST COAT APCOLITE PREMIUM SATIN EMULSION BRUSH / SPRAY STEP 8 SECOND COAT APCOLITE PREMIUM SATIN EMULSION BRUSH / SPRAY 1. As measured through a Ford cup. * Mineral Turpentine Oil 0074 0074 THINNER DILUTION % APPLICATION VISCOSITY1 SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN RECOATING PERIOD MTO* BRUSH 8 - 10 SPRAY 15 - 25 BRUSH 30 - 40 SPRAY 20 - 25 6 - 8 HRS WATER BASED ON REQUIREMENT N/A SAND THE SURFACE WITH SAND PAPER 180 AND WIPE CLEAN 4 - 6 HRS MTO* BRUSH / ROLLER 8 - 10 SPRAY 15 - 25 BRUSH 30 - 40 SPRAY 20 - 25 6 - 8 HRS SAND THE SURFACE WITH SAND PAPER 320 AND WIPE CLEAN WATER BRUSH 15 - 25 SPRAY 25 - 35 BRUSH 30 - 40 SPRAY 20 - 25 WATER BRUSH 15 - 25 SPRAY 25 - 35 BRUSH / ROLLER 30 - 35 SPRAY 20 - 25 4 - 6 HRS 4 - 6 HRS Finishes for Interior Walls HOW TO CHOOSE COLOURS Browse through Asian Paints colour tools to help you find the right colour combination COLOUR SPECTRA DECK* INTERIOR COLOUR COMBINATIONS GUIDE APCOLITE RANGE OF EMULSION SHADE CARD *These shades are for reference only. Please refer to the Colour Spectra or Colour Palette for correct shade reference ADDITIONAL INFORMATION POST PAINTING CARE For the best performance of the paint, ensure proper cleaning of all dust, oil and external particles, if any, at regular intervals of six months. TECHNICAL DETAILS a. Drying time: Surface dry 30 minutes b. Sheen levels: 50 - 60 at 60 degree c. Flash point IS101/1987 Part 1, Sec 6: NA d. Stability of thinned paint: To be used within 2 4 hours PRECAUTIONS > Do not apply when ambient temperature is less than 10°C or if the temperature might drop to this level within 4 hrs of application. > Do not over-thin or over-extend the brush. > Tint using machine colourant only > Stir well and strain before use. > Tinted paints need thorough shaking immediately after tinter addition as well as before use. SAFETY FEATURES > Kindly refer to the MSDS of Apcolite Premium Satin Emulsion which gives detailed information on safety measures while handling the paint. > Keep out of reach of children and away from eatables. > May be harmful if swallowed. In case of ingestion seek immediate medical attention. > Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. > In case of skin contact immediately wash skin with soap and plenty of water. Get medical attention if irritation develops or persists. > Do not pour leftover paint down the drain or in water courses. > In the event of spills, contain spillage using sand or earth. > No added Lead, Mercury or Chromium compounds. Version No. VN01/01/2014 Version No. VN01/12/2013. Please note that this datasheet supersedes all previous versions For Feedback/complaints, write to Marketing Manager Services, Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, IndiaAdobe PDF Library 11.0 Adobe InDesign CC 2014 (Macintosh)