Zyxel DX4510-B1 AX6000 WiFi 6 VDSL2 Bonding Gateway
Quick Start Guide
Package Contents
The package includes the following items:
- DX4510-B1 device
- Power Adapter
- Ethernet Cable
- Phone Cable
- Quick Start Guide
The DX4510-B1 is a member of the Zyxel MPro Mesh solution family.
Step 1: Hardware Installation
- Connect the DSL port to the telephone wall outlet using the phone cable. Use a splitter/filter if connecting a telephone simultaneously.
- Connect the cable or fiber modem's LAN port to the DX4510-B1's WAN port using the included Ethernet cable.
- Connect the power adapter to the DX4510-B1 and wait for 2 minutes. Observe the front panel status lights.
Status Light Indicators:
| Light | Color | Status | Description |
|---|---|---|---|
| POWER | Green | On | Power is on. |
| POWER | Red | Blinking | Starting up. |
| POWER | On | System failure. | |
| POWER | Blinking | Upgrading firmware. | |
| INTERNET | Green | On | DSL Internet is ready. |
| INTERNET | Blinking | Transmitting/receiving Internet data. | |
| INTERNET | Red | On | Attempted to get an IP address, but failed. |
Step 2: WiFi Connection A or B
Connect your wireless device to the WiFi network using one of the following methods:
Method A: Scan QR code to connect WiFi
- Scan the QR code on the side label of the DX4510-B1 with your wireless device.
- Join the displayed WiFi network (SSID) and enter the WiFi password.
Method B: Using the SSID method to connect WiFi
- Locate the WiFi Network Name (SSID) and WiFi Password on the side label of the DX4510-B1.
- On your wireless device, find this SSID and enter the WiFi Password to connect.
Step 3: App Management
- Download the MPro Mesh app from Google Play or the App Store to manage your MPro Mesh network.
- Open the MPro Mesh app and enter the DX4510-B1's serial number, found on the bottom label.
The MPro Mesh app allows you to:
- Remotely manage your network
- View home devices
- Set up Guest Wi-Fi
- Manage home Wi-Fi name
- Enable Internet Instant Block
- Add Mesh Extenders
- Receive push notifications
Adding a Wireless Extender
To add a wireless extender to your DX4510-B1's WiFi network, press the WPS button on the DX4510-B1 once, then press the WPS button on your extender within 120 seconds.
Safety Warnings
- Do not use the product near water or in damp, dusty, or corrosive environments.
- Do not place objects on the device.
- Avoid using the device during thunderstorms.
- Only connect approved accessories.
- Do not open or service the device yourself; contact qualified personnel.
- Ensure cables are connected to the correct ports and are not a tripping hazard.
- Disconnect all cables before servicing.
- Use only the provided or designated power cables and adapters. Ensure correct voltage. Do not use damaged power adapters or cords.
- Do not remove the plug from the power adapter and connect it directly to the outlet.
- Do not place objects on or allow anyone to walk on the power adapter or cord.
- Ensure all connections are indoors.
- Caution: Risk of explosion if the battery is replaced with an incorrect type. Dispose of used batteries properly.
- Do not obstruct ventilation slots. Avoid placing the device in enclosed spaces or on soft surfaces.
- For permanently connected devices, a readily accessible disconnect device must be incorporated external to the equipment. For pluggable devices, the socket-outlet must be installed near the equipment and be easily accessible.
- Caution: RJ-45 jacks are not for telephone line connection.
Regulatory Notice and Statement
United States of America
FCC EMC Statement: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. This device has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this device causes harmful interference to radio or television reception, try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the devices, connecting the equipment to an outlet other than the receiver's, or consulting a dealer or an experienced radio/TV technician.
FCC Radiation Exposure Statement: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must be at least 24 cm from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. Operation of this device is restricted to indoor use only, except for relevant user's manual mention that this device can be installed into the external environment. For 2.4G WLAN, only channels 1 - 11 are operational.
FCC Part 68 Statement: This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains, among other information, the ACTA registration number and ringer equivalence number (REN). If requested, this information must be provided to the telephone company. The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most areas, the sum of the RENs should not exceed five. Contact the telephone company to determine the maximum REN for your calling area. This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line Service is subject to State Tariffs. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. You will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, please contact Zyxel Communications Inc. at 1130 North Miller Street, Anaheim, CA 92806-2001, TEL: 714-632-0882. If the trouble is causing harm to the telephone network, the telephone company may request you to remove the equipment from the network until the problem is resolved. This equipment uses the following USOC jacks: RJ14C. REN: 0.1. It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected.
Canada
Innovation, Science and Economic Development Canada ICES Statement: CAN ICES-003 (B)/NMB-003(B)
Innovation, Science and Economic Development Canada RSS-GEN & RSS-247 Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Antenna Information: This radio transmitter (2468C-DX4510B1) has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed, are strictly prohibited for use with this device.
| NO. | MODEL NAME | TYPE | MANUFACTURER | GAIN | CONNECTOR |
|---|---|---|---|---|---|
| 1 | 56-001-000047Z | Dipole | WHAYU | 2.70 dBi (2.4~2.4835 GHz) | i-pex (MHF) |
| 2 | 56-001-000048Z | Dipole | WHAYU | 2.31 dBi (2.4~2.4835 GHz) | i-pex (MHF) |
| 3 | 56-001-000049Z | Dipole | WHAYU | 2.57 dBi (2.4~2.4835 GHz) | i-pex (MHF) |
| 4 | 56-001-000050Z | Dipole | WHAYU | 2.53 dBi (2.4~2.4835 GHz) | i-pex (MHF) |
| 5 | 56-001-000051Z | Dipole | WHAYU | 2.60 dBi (5.15~5.25 GHz) 2.92 dBi (5.25~5.35 GHz) 3.31 dBi (5.47~5.725 GHz) 3.16 dBi (5.725~5.85 GHz) | i-pex (MHF) |
| 6 | 56-001-000052Z | Dipole | WHAYU | 2.99 dBi (5.15~5.25 GHz) 3.22 dBi (5.25~5.35 GHz) 3.13 dBi (5.47~5.725 GHz) 2.18 dBi (5.725~5.85 GHz) | i-pex (MHF) |
| 7 | 56-001-000053Z | Dipole | WHAYU | 3.48 dBi (5.15~5.25 GHz) 3.09 dBi (5.25~5.35 GHz) 3.79 dBi (5.47~5.725 GHz) 2.46 dBi (5.725~5.85 GHz) | i-pex (MHF) |
| 8 | 56-001-000054Z | Dipole | WHAYU | 0.63 dBi (5.15~5.25 GHz) 2.62 dBi (5.25~5.35 GHz) 2.61 dBi (5.47~5.725 GHz) 3.73 dBi (5.725~5.85 GHz) | i-pex (MHF) |
5G Wireless Function Attention:
- For operation in the 5150-5250 MHz band, the device is for indoor use only to reduce potential interference to mobile satellite systems.
- For devices with detachable antennas, the maximum antenna gain permitted in the 5725-5850 MHz band must comply with e.i.r.p. limits.
- Antenna types, model numbers, and worst-case tilt angles necessary to remain compliant with elevation mask requirements must be clearly indicated.
- For devices with detachable antennas, the maximum antenna gain permitted in the 5250-5350 MHz and 5470-5725 MHz bands must comply with e.i.r.p. limits.
Industry Canada radiation exposure statement: This device complies with ISED radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 29 cm between the radiator and your body.
Statement of compliance: This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.
Ringer Equivalence Number (REN): The REN indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. REN: 0.1
For more information, including customer support, see the User's Guide at www.zyxel.com.
