Use and Care Guide for Whirlpool models including: Whirlpool, EASY CLEAN 100TM, Electric Dryer, Gas Dryer, 3401091 Rev. A, Dryer Manual, Use and Care Guide, LEL8858DQ0, LEL8858DZ0
~ifl 4a
HOWTOMAKEAKtME~"
01"
UseAndCare
A Note to You ......................... 2
Dryer Safety ......................... 3-4
Parts and Features ................. 5
Operating Your Dryer.. ........... 6 Before starting your dryer .. .6 Starting your dryer .............. 6 Stopping/restarting your dryer.. .......................... 6 Selecting the right cycle and setting .......................... 7 End of cycle signal ............ 10 Using the drying rack ........ 11 Using and maintaining the EASY CLEAN 100TM lint feature ......................... 12 Periodic maintenance ....... 13 Cleaning the lint collector basket ............................... 13
Caring for Your Dryer .......... 14
Laundry Tips.. ....................... 19
Troubleshooting ................... 23
Requesting Assistance or Service.. ............................ 25
Warranty ............................... 28
1-800-253-I 301
Call our Consumer Assistance Center with questions or comments.
EASY CLEAN 100TM ELECTRIC AND GAS DRYERS
PART NO. 3401091 Rev. A
a19bD-Line)
A Note to You
Thank you for buying a WHIRLPOOL@ appliance.
Because your life is getting busier and more complicated, WHIRLPOOL dryers are easy to use, save time, and help you manage your home better. To ensure that you enjoy years of trouble-free operation, we developed this Use and Care Guide. It contains valuable information about how to operate and maintain your dryer properly and safely. Please read it carefully. Also, please complete and mail in the Ownership Registration Card provided with your appliance. The card helps us notify you about any new information on your appliance.
Please record your model's information.
Whenever you call to request service on your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label in the door well (see diagram on page 5 for location of label).
Please also record the purchase date of your appliance and your dealer's name, address, and telephone number.
Model Number Serial Number Purchase Date Dealer Name Dealer Address Dealer Phone
Keep this book and the sales slip together in a safe place for future
reference.
I Our Consumer Assistance Center number is toll-free 24 hours a day.
1-800-253-1301
1
Dryer Safety
Your safety is important to us.
This guide contains safety statements under warning symbols. Please pay special attention to these symbols and follow any instructions given. Here is a brief explanation of the use of the symbol.
This symbol will help alert you to such dangers as death, fire, electrical shock, burns, and personal injury.
IMPORTANT SAFETY INSTRUCTIONS
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS: l Do not try to light any appliance. l Do not touch any electrical switch; do not use any phone in your
building. l Clear the room, building, or area of all occupants. l Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions. l If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
continued on next page
3
Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury to persons when using your dryer, follow basic precautions, including the following:
l Read all instructions before using your dryer.
l Dryer must be electrically grounded. See the Installation Instructions.
l Do not machine wash or machine dry items cleaned, washed, soaked in, or spotted with wax, paint, gasoline, oil, dry cleaning solvents, or other flammable fluids. The fumes can create a fire hazard or explosion. Always hand wash and line dry items containing these materials.
l Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.
@Store flammable solvents or fluids away from your dryer.
l Dry cleaning solvents or fluids should never be put directly into your dryer.
l Do not let dust, lint, paper, rags, chemicals, etc., pile up around or under the dryer.
* Insert the transport tube into lint tray before closing dryer top (see page 17).
l Do not reach into a dryer if the drum is moving.
l Do not allow lint to build up inside the dryer or exhaust system (other than in the EASY CLEAN 1OOTMlint collector basket). Cleaning inside the dryer cabinet should be done periodically by a qualified person.
l Check status of lint collector basket window before each load.
l Empty lint collector basket when lint indicator window shows "Full".
l Do not allow children to operate, play with, or crawl inside your dryer. Supervise children when your dryer is used near children.
l Install and/or store dryer where it will not be exposed to the weather.
l Do not tamper with the controls.
l Do not dry rubber, rubber-like, or heatsensitive materials with heat.
l Unplug the power supply cord or turn off electrical power before attempting to service your dryer. Also, shut off gas valve if you have a gas dryer.
. When removing from service or discarding a dryer, always remove the door to prevent accidental entrapment.
l Use only fabric softeners specifically labeled as not being harmful to the dryer.
Understanding
your responsibilities
l Be sure that your dryer: -is located in an area where the
-is used only for jobs normally expected of home clothes dryers.
temperature is above 45°F (7°C).
-is not used by anyone unable to operate
-is properly installed in a well-ventilated
it properly.
room and leveled on a floor that can support the weight.'
l Never operate the dryer if: - it is not working right (i.e. squeaking or
-is connected to the proper outlet and
rubbing noises, too hot).
electrical supply.*
- it is damaged.
-is properly connected to fuel and
- parts are missing.s
exhaust systems (gas dryers must be
- all panels are not in place.
vented outdoors).*
-is not installed against draperies or curtains, or on carpet.*
-is properly maintained, repaired, and has parts replaced by a qualified person.
-the lint collector basket is not properly inserted, damaged, blocked, or missing.
l See the Installation Instructions for complete information.
4
- SAVE THESE INSTRUCTIONS -
Parts and Features
The parts and features of your dryer are illustrated below. Become familiar with all parts and features before using your dryer. Page references are included next to some features. Refer to those pages for more information about the features.
NOTE: The drawings in this book may vary from your dryer model. They are designed to show the different features of all models covered by this book. Your model may not Include all features.
Cycle control :;;I
Temperature selector
(P. 6) \
Start button (P. 6)
/
Lint indicator , window
(P. 12)
?
EASY CLEAN 100TM
e
lint storage lid
(P. 12)
Model and serlal number label (P. 2)
Dryer drum -
EASY CLEAN 1OOTM `lint collector basket
(P. 12)
Wide-opening
Additional features: (on some models)
FINISH GUARDS option (p. 8) End of cycle signal (p. IO) Drying rack (p. 11) Drum light (p. 14)
5
Operating Your Dryer
The information in this section helps you use your dryer efficiently and safely. Refer to "Laundry Tips" on page 19 for information on sorting, loading, and drying most types of washables.
Before starting your dryer
Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from storing and shipping.
Your dryer may have a Dryer Features Guide (usually located on top of the dryer). Remove it and place it with your Use and Care Guide. The Features Guide provides you with more
information about your dryer.
Starting your dryer
1. Load clothes into the dryer and close the door.
4. Set the Temoerature Selector to the desired setting. Refer to drying cycles charts on pages 9 and 10.
2. Make sure lint collector basket lid is securely closed, and that lint indicator window is not full. (See "Using and maintaining the EASY CLEAN 1OOTMlint feature" on page 12.)
3. Turn the Cycle Control Knob to the
q 4
desired cycle. Use the Energy Preferred Automatic Setting (*) to dry most loads (see page 7).
5. Push the Start Button.
NOTES: l Your dryer stops automatically when a
cycle ends. l Higher air flow from your new dryer may
blow out accumulated lint from the existing exhaust system.
Stopping/restarting
your dryer
You can stop your dryer anytime during a cycle.
To stop the dryer, either: l Open the dryer door.
To restart the dryer: 1. Close the door. 2. Select a new cycle and temperature
(if desired). 3. Push the Start Button.
OR
. l Turn the Cycle Control Knob to Off.
+
NOTE: The Cycle Control Knob
should point to an Off area
&!I
when the dryer is not in use.
6
Selecting the right cycle
The following pages describe the cycles on your dryer. Refer to the charts on pages 9 and 10 for help in selecting drying cycles.
and setting
Drying guidelines
l Always follow care label directions when they are available.
l Use the Fluff Air cycle, or line dry rubber, plastic, delicate, and heat-sensitive fabrics (see page 10).
l The last few minutes of all cycles are without heat to make the load cooler to handle.
l To help reduce wrinkling, remove the load frOtTl the dryer aS SOOn Xi tumbling StOpS. This is especially important for permanent press, knits, and synthetic fabrics.
l Overdrying can cause shrinkage, static cling, and damage to some fabrics.
l Check the EASY CLEAN 100TM lint indicator window. If full, refer to page 12 for cleaning.
l Refer to pages 19-22 for information about: -sorting clothes for drying - choosing load sizes - drying tips _ using dryer fabric softeners
- saving energy - drying special-care items.
Cycle descriptions
Electronic DRY-MISER@ (Automatic) Cycle
Dry most loads using the Energy Preierred Automatic Setting (*). Your Automatic cycle(s) shuts off when the selected dryness is reached. The Cycle Control Knob may not move until the load is almost dry. After the cool-down, the Knob
continues to slowly turn to an Off area and tumbling stops, unless FINISH GUARD@ is running (see page 8).
l If the load is drier than you like, select a setting closer to Less Dry the next time you dry a similar load.
l If the load is not as dry as you like, complete drying using a Timed cycle. Select a setting closer to Very Dry the next time you dry a similar load.
Some models offer high heat and low heat Automatic cycles (see page 9).
NOTES: l Some Automatic cycles use an electronic
DRY-MISER@ control that senses the amount of moisture in the load. l Other Automatic cycles use an automatic DRY-MISER control that senses the exhaust temperature and determines the dryness of the load.
Towels Feature
(on some models)
When you have large loads of towels to dry, you may want to use the Towels feature in the Automatic Cycle. The Towels setting allows for more drying time and automatically shuts off the dryer when the selected dryness is reached. The Towels feature
also can be used for extra heavy items such as mattress pads and quilts.
continued on next page 7
FINISH GUARD' Option
(on some models)
When you are unable to remove a load from the dryer as soon as it stops, wrinkles can form. The FINISH GUARD option tumbles the load without heat every few minutes up to 45 minutes after the cycle ends. This tumbling rearranges and fluffs the load to avoid wrinkles.
On some models you can turn the FINISH GUARD option On or Off. You do not have to set the Cycle Control Knob for the FINISH GUARD option. If you do not open the dryer door within a few minutes after the cycle stops, the FINISH GUARD option takes over to protect the load.
A signal sounds every few minutes when FINISH GUARD is running. The signal and cycle stop when you open the dryer door.
Timed Drying Cycle
Use the Timed Drying cycle to complete drying if some items are damp after Automatic drying. Timed drying is also useful for:
l Delicate items and small loads that need a short drying time.
l Bulky items and large loads that require a long drying time.
Heavy Dry Feature
(on some models)
Use Heavy Dry and a high heat setting to dry large items or items that are thicker or heavier than a regular load (such as heavy cotton bath sheets or robes).
Damp Dry Feature
Use Damp Dry to dry items to damp level or to dry items that do not require an entire drying cycle. Two examples are heavy cottons, such as jeans, which you do not want to become stiff, or cotton clothes which are easier to press when damp.
TUMBLE PRESS@ Feature
The TUMBLE
PRESS feature removes wrinkles from clothes that have been packed in a suitcase or closet, or from items not removed from the dryer at the end of a cycle. As soon as the dryer stops, fold or put the items on hangers.
Fluff Air Cycle
The Fluff Air cycle has no heat. Use this unheated cycle to fluff or air dry bedding, plastic tablecloths, foam pillows, sneakers, etc. See page 10 for more information about the Fluff Air cycle.
Drying cycles chart
Use the chart below to help you make drying selections. The chart suggests heat settings and drying times for various loads.
NOTES: l Use an Automatic cycle to dry most loads. l Use a Timed cycle if the recommended
Automatic cycle is not available.
l The check mark J in the chart below denotes recommended temperature settings. If some types of loads in the chart have more than one suggested temperature setting, choose the lowest setting available on your dryer.
l Always follow care label directions when they are available.
TYPE OF LOAD
AUTOMATIC CYCLE (heat settings)
Extra High Medium* Low Low*
TIMED DRYING CYCLE (minutes)
High
Low
COTTONS AND LINENS
Extra Heavy
Bedspreads, mattress pads, quilts
J
Heavyweight
Towels, jeans, corduroys, work clothes J
Mediumweight
Sheets, cotton underwear, diapers
J
Lightweight
Batistes, organdies, lingerie
J
70-80 50-60 40-50
20-30
PERMANENT PRESS, SYNTHETICS, AND BLENDS Heavyweight
Work clothes, jackets, raincoats Mediumweight
Shirts, play clothes, sheets, slacks Lightweight
Lingerie, blouses, dresses
/ J J
40-50 30-40
20-30
KNITS
Heavyweight
Cottons, rayons, blends, T-shirts,
J
slacks, shirts
Mediumwelght
Synthetics (polyester, acrylic, etc.),
J
dress slacks, skirts, sweaters
Lightweight
Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
40-50 J
l Settings available only on dryer models with separate temperature selector.
30-40 20-30
9
Fluff Air cycle or line drying
The chart below includes examples of items that require drying without heat. Use the Fluff Air cycle, or place the items on a line or rack to air dry.
NOTES: l Heat-sensitive fabrics should not be dried
in the dryer. l Line dry bonded or laminated fabrics. l Always follow care label directions when
they are available.
Fire Hazard
Use Fluff Air Cycle to dry Items listed below. Do not use heat to dry these items. Failure to do so can result in death or fire.
TYPE OF LOAD
DELICATE FABRICS Sheer curtains (two or three panels), gauze, lace, etc.
RUBBER, PLASTIC, HEAT-SENSITIVE FABRICS Foam Rubber - Pillows, padded bras, stuffed toys l Make sure coverings are securely stitched. l Shake and fluff pillows by hand several times during the Fluff
Air cycle. l Make sure pillows are completely dry. Foam rubber pillows
take a long time to dry. Plastic - Shower curtains, tablecloths Rubber-backed rugs Olefin, Polypropylene, Sheer nylon
COlTON AND CANVAS SHOES l Place several bath towels in the dryer to act as a buffer, or
place shoes on a drying rack if your dryer has one. l Remove shoes from dryer while still damp. l Stretch shoes and allow to air dry.
l Reset cycle as needed to complete drying.
FLUFF AIR CYCLE* (minutes) 20-30 20-30
20-30 40-50 1 O-20
30-40
End of cycle signal
The dryer sounds a signal to let you know when the cycle is finished. The signal is helpful when you are drying permanent press, synthetics, and other items that should be removed from
the dryer as soon as it stops.
10
The end of cycle signal can be turned On or Off on some models.
Using the drying rack
(available as an option on some models)
To order the drying rack (Part #692990), call: l-800-253-1301. You will hear a recording. Follow the steps to place an order.
The drying rack lets you dry items that you may not want to tumble. The rack does not move, but the drum turns.
1. Fit rear legs of the rack into indentations in the back wall of the dryer. Lower the front so the legs rest on the dryer opening.
3. Close the door.
4. Select the Timed Drying cycle (and temperature, if desired), or the Fluff Air cycle (see page 8). Drying time depends on the amount of moisture in the items.
5. Push the Start Button.
2. Put wet items on top of the rack. Leave space between the items so air can reach all surfaces.
NOTE: Make sure nothing hangs over the edge of the rack.
NOTES:
l See the chart below for suggested cycles and settings for the different types of items that might best be rack dried.
l The rack must be removed for normal tumbling.
l Drying time will depend on how much moisture the items hold. The following chart suggests drying times.
l Automatic cycles do not work with the drying rack.
IRACK DRY
CYCLE I
Wool sweaters (Block to shape and lay flat on the rack)
Stuffed toys or pillows (Cotton or polyester fiber filled)
Timed Drying
Stuffed toys or pillows (Foam rubber filled)
Sneakers or canvas shoes
Fluff Air
TEMPERATURE LOW or EX LOW
TIME* (minutes)
60
None; cycle is unheated.
90 30-40
l Reset cycle as needed to complete drying.
11
Using and maintaining the EASY CLEAN 100TM lint feature
Your dryer has the EASY CLEAN 100 TMlint collector basket. This new feature minimizes lint cleaning requirements. It is designed to reduce the need to clean the lint accumulation between each load, up to 100 loads, depending on the types of fabrics being dried. If you dry small loads or delicate fabrics more frequently, lint accumulation may take longer than with large loads or heavy fabrics.
Emptying the lint collector basket
1. When the lint reaches the shaded area within the window, indicating the collector basket is full,
3. Turn basket upside down over a waste can and tap the basket lightly. Lint falls off easiest if basket is full. You may also see sand, grass, or other debris collected in basket.
71
lift the lid until it
4. Reinsert the basket onto its tracks under
releases.
the lid, and slide in
until it stops.
2. Hold lid open and pull the basket by its $;;E ununL$ slides
5. Lower lid until magnetic latch clicks.
NOTES: l Do not run the dryer with the lint basket improperly inserted, damaged, blocked, or missing.
Doing so can cause overheating and damage to both the dryer and fabrics. l If there is no lint accumulation in the collector basket after several loads, contact our
Consumer Assistance Center at l-800-253-1301.
12
Periodic maintenance
You may find it necessary to clean the lint collector basket tray, and the transport tube opening, indicated by arrow. 1. Lift lid all the way and hold open. 2. Suction lint in tray and collector basket
tray opening with vacuum cleaner.
Cleaning the lint collector
Laundry detergents and fabric softeners can cause a residue buildup on the lint collector basket. Clean it with a nylon brush if it becomes clogged due to a residue buildup. Use the following method: 1. Wet both sides of the lint collector basket
with hot water.
Basket Collector basket tray opening
Collector basket tray
basket
2. Wet a nylon brush with hot water and liquid detergent; brush lint collector basket gently to avoid damage while removing residue buildup.
3. Rinse lint collector basket with hot water.
4. Thoroughly but gently dry lint collector basket with a clean towel; replace in dryer.
13
Caring for Your Dryer
Proper care of your dryer can extend its life. This section explains how to care for your dryer properly and safely.
Cleaning the dryer interior
Garments which contain unstable dyes, such as denim blue jeans or brightly colored cotton items, may discolor the dryer interior. These stains are not harmful to your dryer and will not stain future loads of clothes.
To clean dryer drum:
1. Make a paste with powdered detergent and very warm water.
2. Apply paste to a soft cloth and scrub area until all excess dye is removed. OR Apply liquid nonflammable household cleaner to the stained area and rub with a
cloth until all excess dye is removed. 3. Wipe thoroughly with a damp cloth.
4. Tumble a load of clean cloths, using air cycle, to dry.
Explosion Hazard
Use nonflammable cleaners only. Failure to do so can result in death, explosion. or fire.
Changing the drum light
(on some models)
If your dryer has a drum light, it will be one of two types, shown below and on the next page. The dryer light automatically turns on inside the dryer drum when you open the door.
To change drum light:
1. Unplug the dryer or disconnect the electricity leading to the dryer at the main power supply.
2. Open the dryer door. Remove the light bulb cover from the back wall of the dryer by turning the cover clockwise.
Fire Hazard
Unplug dryer before changing light bulb.
Replace light bulb cover before operating dryer. Failure to do so can result in death, fire, or electrical shock.
3. Remove the light bulb by turning it counterclockwise.
14
4. Replace the bulb with a 40-watt appliance bulb only.
5. Replace the light bulb cover and lock in place by turning counterclockwise.
6. Reconnect power supply. To change drum light: 1. Unplug the dryer or disconnect the
electricity leading to the dryer at the main power supply. 2. Open the dryer door. Remove the light
bulb cover from the back wall of the dryer by removing the screw located in the lower right corner of the cover.
3. Remove the light bulb by turning it counterclockwise.
4. Replace the bulb with a 25-watt appliance bulb only.
5. Replace the light bulb cover.
6. Reconnect power supply.
15
Removing accumulated cabinet -
Lint can gather inside the dryer cabinet and be a fuel for fire. Lint should be removed every two to three years, or more often, depending on dryer usage. Cleaning should be done by a qualified person. If you have any questions or comments, please call our Consumer Assistance Center at 1-800-253-l 301.
For electric dryers:
1. Unplug the power supply cord or turn off the electrical power.
2. Remove back panel (electric). See the Installation Instructions.
3. Remove lint from shaded area in illustration with a soft brush or vacuum cleaner. Avoid damaging wires or thermostats.
4. Replace panel. 5. Reconnect and level dryer again, if
necessary.
lint inside the dryer
Electrical Shock Hazard Unplug dryer before removing dryer panels. Wear gloves when handling dryer parts. Make sure door switch wires are not touching the dryer drum before closing the top. See page 18, Step 7. Failure to do so can result in death, electrical shock, or serious cuts.
Outlet duct -
Blower houslng
16
For gas dryers:
1. Unplug the power supply cord or turn off the electrical power.
2. Open top by pulling forward and up at each front corner (see View A). Prop top straight up (at no more the a 90" angle).
3. Remove two internal screws from front panel flanges (near top front corners). Lift front panel slightly, lifting off lower clip (see lower clip inset of View 6). Slowly pull front panel forward, disengaging panel from drum. (Drum will drop slightly.)
4. Move front panel aside and rest edge against side of dryer. Avoid disconnecting wire clip (see wire clip inset of View 6) or damaging wires.
5. Remove lint from shaded area of the illustration with soft brush or vacuum cleaner. Avoid damaging wires, funnel, or ignitor.
Transport
/ ?be-
Collector !, basket tray
I
Funnel \
lgnitor
Gas dryer with front access panel removed
continued
on next page 17
Before reassembling, read these instructions carefully.
6. Make sure transport tube is reinserted into the collector tray as shown. If the tube is not reinserted correctly, it may rub against the dryer drum creating a noise.
Lint collector tray
7. Reassemble in reverse order. Before closing the top, check the following:
-Drum seal must be flared out (see drum seal insets of View B) and properly positioned against panel at back of drum. Rotate drum counterclockwise one full turn to check drum seal.
Transport tube
-Belt should be centered and tight on dryer drum.
-Wire clip which holds the door switch wires must be anchored in slot in top of front panel (see wire clip inset of View
I
For more information, call our Consumer Assistance Center.
I
B). Door wires must not touch drum when dryer is operating.
1 1-800-253-1301
1
8. Replace top panel. Top and front panels must be securely in place before operating dryer.
9. Reconnect power and level dryer again.
18
Laundry Tips
This section provides information on preparing clothes for drying, drying guidelines, and instructions for drying special-care items.
NOTES: l Refer to your Washer Use and Care Guide for proper washing techniques
laundry tips. l See pages 3 and 4 of this book for Important Safety Information.
and additional
Sorting clothes
l Separate dark from light colors; colorfast from non-colorfast. Items properly sorted for washing are usually properly sorted for drying.
l Separate heavy fabrics (denim, towels) from light fabrics (synthetics, permanent press).
Choosing load sizes
l Mix large items with smaller items. Load the dryer by the amount of space items take up, not by their weight. Do not overload the dryer. Overcrowding causes uneven drying and
wrinkling, and can cause items to wear out faster (because of pilling). l You may need to rearrange large items (sheets, blankets, tablecloths) during a cycle to reduce balling or rolling up.
Drying tips
l Close zippers, snaps, and hooks to avoid snagging other items. Remove heat-sensitive trim that can be damaged by drying. Tie strings and sashes so they will not tangle.
l Check garments to make sure all spots and stains were removed during the wash. Do not tumble dry soiled or stained items. Heat may permanently set stains.
l Separate lint givers (towels, chenille) from lint takers (corduroy, synthetics, permanent press). When possible, turn lint takers inside out.
l For better tumbling action, when drying only a few small items, add one or two lint-free towels. This also prevents small, lightweight items from blocking airflow.
l Sharp or metal objects can damage your dryer. Check pockets for pins, clips, money, bolts, nuts, etc. Do not lay these objects on your dryer after emptying pockets. Turn pockets of
heavy items inside out for even drying. l Place small items such as baby socks or
hankies in a mesh bag for easier removal. l Articles to be ironed should be removed
from the dryer while still damp.
19
Using dryer fabric softeners
Dryer fabric softeners are recommended for reducing static cling and for softening fabrics. Always follow package instructions carefully. Use fabric softeners labeled as dryer safe.
l Put one fabric softener sheet on top of the load before starting the dryer. Do not add a fabric softener sheet after the drying cycle has started. Instant heat can cause the fabric softener
to spot fabrics.
. Remove fabric softener stains by wetting the stains and rubbing them with liquid detergent or bar soap and rewash.
l Some fabric softeners may cause a build-up on the lint collector basket. See "Periodic maintenance" on page 13.
Saving energy
l Use the Automatic cycle to dry most loads.
l Dry only full loads without overdrying. l Avoid overloading dryer, adding wet items
to a partly dried load, or opening the door unnecessarily.
l Plan your laundry to dry one load after another. A warm dryer shortens drying time.
l Shorten drying times by exhausting dryer properly and cleaning exhaust duct and outside exhaust hood as needed.
- Keep vent clean by regularly cleaning your basket when lint indicator window indicates "Full."
-Use your dryer in a room where room air temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
Vacation care
1. Unplug power supply cord or turn off electrical power supply.
2. Clean lint collector basket (see page 13).
20
Drying special-care items
Most garments and household textiles have manufacturer's care labels with laundering instructions. Always follow care label directions when they are available. Pages 9 and 10 include drying instructions for most types of washables. The chart below provides drying instructions for special-care washables.
ITEMS Blankets and woolens
. Cotton, rayon, synthetic blankets
l Electric blankets, electric sheets, woolen blankets, washable woolen garments
Curtains, slipcovers l Draperies,
slipcovers
Diapers, baby clothes
Elastic items Flame-retardant finishes
DRYING INSTRUCTIONS
Machine drying knitted woolens is not recommended. Block to shape when wet and allow to air dry. Line dry blankets in the shade on a breezy day over two lines. Pin edges together and straighten them. When partly dry, turn the blanket over, repin, and restraighten. When dry, brush nap. Dry as recommended for permanent press fabrics on page 9.
If manufacturer recommends machine drying: 1. Place one or two dry towels in the dryer and preheat 3 to 5
minutes on a high setting. This will dry blankets faster and help avoid pilling. 2. Put blanket in dryer with warm towels. Set control for 20 minutes. 3. Check after 10 minutes. Remove when still damp. Overdrying and long tumbling can cause shrinking and pilling. 4. Place blanket on flat surface, or over two lines to finish drying. Gently stretch to original size and shape. 5. When completely dry, brush gently to raise nap. Press binding with cool iron if needed.
Remove drapery weights and hooks before laundering. For slipcovers, replace while still slightly damp. They will dry to fit tightly. Dry only a few minutes. 1. Leave room in dryer for load to fluff. 2. Remove from dryer while slightly damp. Do not overdry.
Wash and dry small items in a mesh bag or pillowcase for convenient handling. Remove diapers and cotton knit items while still slightly damp. They will feel softer, shrink less, and be easier to fold.
Remove from dryer while still slightly damp.
Some items have been treated with a flame-retardant finish to improve their resistance to burning. Such items are clearly labeled. To retain flame-retardant qualities through continuous use and washing, clean and dry according to the manufacturer's instructions.
continued on next page
21
rITEMS
Napped items
l Corduroy, velveteen
Quilted, downfilled items
Snowsuits, jackets l Nylon or
polyester
Tinted, dyed, or noncolorfast items Washable knits
DRYING INSTRUCTIONS
Dry separately or with similar colors to avoid lint transfer. Follow care label instructions. 1. Remove from dryer while there is still a trace of moisture. 2. Smooth, reshape, and air dry before putting away.
Follow care label instructions. 1. Dry one at a time. 2. Remove from dryer and shake or fluff the item during the drying
cycle. 3. Smooth and reshape before putting away.
Check label for fiber content, then follow care label instructions.
1. Dry garment for about 10 minutes. Remove and turn inside out. Dry for 10 more minutes.
2. Remove from dryer immediately and hang on a non-rusting hanger to finish drying. This will help eliminate wrinkles.
Dry according to fabric, weight, and care label instructions. Wipe the dryer drum carefully to remove any dye or lint that can be transferred to other loads. See "Cleaning the dryer interior" on page 14.
Do not overdry knits. Overdrying can cause shrinking and static cling. 1. Select cycle according to fabric and construction. 2. Turn synthetics and blends inside out when drying to avoid pilling. 3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
22
Troubleshooting
Most laundering problems are easily solved if you understand the cause. Check the following list for laundry problems you may have and their possible causes. Also refer to the next page for a dryer checklist which can help you solve some simple problems without calling for service. If you still need help, see "Requesting Assistance or Service" on page 25.
Common laundry problems
PROBLEM Greasy spots
CAUSE l Dryer fabric softener improperly used. See manufacturer's l Drying soiled items.
directions.
Lint on clothes
l Load not properly sorted.
l Overdrying, especially synthetic fabrics that cause lint-attracting static electricity.
l Load size too big or heavy.
l Tissue or paper left in pockets.
l Pilling (surface fuzz caused by normal wear and laundering) attracts lint.
Shrinking
Slow drying Stains Static electricity Wrinkling
l Overdrying. l Fabric type and quality inappropriate for drying. l Dryer settings incorrect for fabric type. l Manufacturer's care label instructions not followed.
. Load too large and bulky to dry quickly. l Dryer located in room with temperature below 45°F (7°C). l Exhaust duct clogged, restricted, or too long.
l Drying soiled items. l Dryer fabric softener improperly used. See manufacturer's directions. l Dryer interior stained. (See page 14 for cleaning procedures.)
l Overdrying. l Dryer fabric softener improperly used. See manufacturer's directions. l Load includes synthetics, synthetic blends, permanent press, and knit
fabrics that build up static electricity.
l Overloading. l Overdrying, especially permanent press, and synthetic fabrics. l Clothes left in dryer at end of cycle.
23
Common dryer problems 1. Dryer will not start.
3. No heat
Is the dryer door firmly closed?
Are the controls set in a ON position?
Did you firmly push the Start
1 Is the power cord plugged in?
Have you blown a fuse or tripped the circuit breaker?
For electric dryers, have you blown a fuse or tripped a circuit breaker? Also check if a time-delayed fuse or circuit breaker has been used.
4. Noises
If the dryer hasn't been used for awhile, there may be a thumping sound from the support rollers. You may hear an airflow noise that is different than your old dryer. This noise is common. Has transport tube been reinserted correctly after cabinet cleaning? See page 18.
2. Lint accumulation
in hood or
exhaust duct, or extended
drying times.
I
1
Is lint collector basket full?
If you still have problems, see "Requesting Assistance or Service" on page 25.
Is exhaust duct or outside exhaust hood clogged with lint?
NOTE: Your new dryer may blow out accumulated lint from the existing exhaust system.
24
Requesting Assistance or Service
Before calling for assistance or service, please check "Troubleshooting" on pages 23-24. It may save you the cost of a service call. If you still need help, follow the instructions below.
1. If you need assistance* . . .
Call the Whirlpool Consumer Assistance Center telephone number. Dial toll-free from anywhere in the U.S.A.:
1-800-253-l 301
and talk with one of our trained consultants. The consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company in your area.
If you prefer, write to:
Whirlpool Brand Home Appliances Consumer Assistance Center c/o Correspondence Dept. 414 N. Peters Rd. Knoxville, TN 37922
Please include a daytime phone number in your correspondence.
2. If you need service' . . .
Whirlpool has a nationwide network of
authorized Whirlpool service
companies. Whirlpool service
SERVKE technicians are trained to fulfill
the product warranty and
El
provide after-warranty service,
anywhere in the United States. To locate
the authorized Whirlpool service company
in your area, call our Consumer Assistance
Center telephone number (see Step 1) or
look in your telephone directory Yellow
Pages under:
l APPLlANCE-HOUSEHOLD
MAJOR, SERVICE 6 REPAIR
- See: Whirlpool Appliances or Authorized Whirlpool Service (Example: XYZ Sefvioe Co.)
l WASHING MACHINES L DRYERS, SERVICE 6 REPAIR
-See: Whirlpool Appliances or Authorized Whirlpool Service (Example: XYZ Favice CO.)
3. If you need FSP replacement parts . . .
FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your WHIRLPOOL@ appliance. FSP replacement parts will fit right and work right, because they are made to the same exacting specifications used to build every new WHIRLPOOL appliance.
To locate FSP replacement parts in your area, refer to Step 2 or call the Whirlpool Consumer Assistance Center number in Step 1.
4. If you are not satisfied with how the problem was solved . . .
l Contact the Major Appliance Consumer Action Program (MACAP). MACAP is a group of independent consumer experts that voices consumer views at the highest levels of the major appliance industry.
l Contact MACAP only when the dealer, authorized servicer, and Whirlpool have failed to resolve your problem.
Major Appliance Consumer Action Program 20 North Wacker Drive Chicago, IL 60606
l MACAP will in turn inform us of your action.
l When asking for help or service:
Please provide a detailed description of the problem, your appliance's complete model and serial numbers, and the purchase date. (See page 2.) This information will help us respond properly to your request.
26
27
WHIRLPOOL"
Dryer Warranty -
LENGTH OF WARRANTY
WHIRLPOOL WILL PAY FOR
FULL ONE-YEAR WARRANTY From Date of Purchase
FSP@ replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by an authorized Whirlpool service company.
SECOND THROUGH FIFTHYEAR LIMITED WARRANTY On EASY CLEAN 100TM lint feature parts only From Date of Purchase
FSP replacement parts to correct defects in materials or workmanship of the following parts:
Part Collector assembly Hinge Seal - lid Seal - basket Seal - transport tube, lower Seal -transport tube, upper Transport tube assembly Recirculate tube Tray assembly Latch assembly
Part No. 3404418 (white), 3404419 (almond) 3402247 3402261 3402260 3401604 3402270 3399995 3399992 3402306 3404451 (white), 3404452 (almond)
WHIRLPOOL WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your dryer.
2. Instruct you how to use your dryer.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace light bulbs.
6. Repairs when your dryer is used in other than normal, single-family household use.
C. Pickup and delivery. Your dryer is designed to be repaired in the home.
D. Damage to your dryer caused by accident, misuse, fire, flood, acts of God, or use of products not approved by Whirlpool.
E. Any labor costs during the limited warranty.
F. Repairs to parts or systems caused by unauthorized modifications made to the
appliance.
8-95
WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Outside the United States, a different warranty may apply. For details, please contact your authorized Whirlpool dealer.
If you need service, first see the "Troubleshooting" section of this book. After checking "Troubleshooting," additional help can be found by checking the "Requesting Assistance or Service" section, or by calling our Consumer Assistance Center telephone number, l-800-253-1301, from anywhere in the U.S.A.
PART NO. 3401091 Rev. A
0 1996 Whirlpool Corporation
@ Regstered TrademaMTM Trademark of Whirlpool, U SA
l/96 Printed in U.S.A.
Acrobat PDFWriter 3.03 for Windows; modified using iTextSharp 4.1.6 by 1T3XT
Related Documents
Whirlpool Electric and Gas Dryer Use and Care Guide A comprehensive guide for operating, maintaining, and troubleshooting Whirlpool electric and gas dryers. Learn about different cycles, safety precautions, and care instructions for optimal performance.
Whirlpool Easy-To-Use Electric and Gas Dryers Use & Care Guide Comprehensive Use & Care Guide for Whirlpool electric and gas dryers, covering safety, operation, maintenance, troubleshooting, and warranty information. Learn how to use your dryer efficiently and safely.
Whirlpool Easy-To-Use Electric and Gas Dryers Use and Care Guide This Use and Care Guide provides essential information for operating and maintaining your Whirlpool electric and gas dryer. It includes safety warnings, parts identification, operating instructions, cycle descriptions, maintenance tips, troubleshooting advice, and warranty details.
