Nathan Zephyr Trail™ 200 R
Usage Instructions
- To turn on, press and hold the power button (1) integrated into the hand grip for 2-3 seconds.
- Press the power button repeatedly to cycle through modes.
- To turn off, press and hold the power button for 2-3 seconds.
To Replace Battery:
The Zephyr Trail 200 R uses two AA batteries.
Step 1: Locate the battery compartment at the rear of the flashlight. It is secured by a twist-lock mechanism.
Step 2: Turn the rear cap counter-clockwise to unlock and remove it. [unlock-symbol]
Step 3: Remove the old batteries. Note the orientation of the positive (+) and negative (-) terminals.
Step 4: Insert two new AA batteries, ensuring correct polarity. The positive (+) end of the battery should connect to the spring, and the negative (-) end should connect to the contact.
Step 5: Replace the rear cap and turn it clockwise to lock it securely. [lock-symbol]
Visual Aid Description: The diagrams illustrate the process of unlocking the rear cap, removing old batteries, inserting new AA batteries with correct polarity (+/-), and then locking the cap back into place.
