Ultimea Tapio V 2.1 CH Soundbar System

Introduction

Thank you for purchasing the Ultimea Tapio V. This guide will help you set up the soundbar to enjoy the ultimate sound experience.

In the Box

• Item 1: Rod with two small pieces (likely for mounting or connection)
• Item 2: Small box with a cable (likely power adapter component)
• Item 3: Remote control with a wire (likely for battery connection or antenna)
• Item 4: Cable with connectors (e.g., audio cable)
• Item 5: Cable with a red connector (e.g., RCA audio cable)
• Item 6: Power adapter with a cable
• Item 7: Wall mounting screws and anchors
• Item 8: User manual booklet

Diagram: Buttons, Ports & Indicator

The soundbar features controls and connection ports on its top and rear panels.

Top Panel Controls:

• 1: Power on/off / Mode button ⏻
• 2: Play / Pause button ▶️⏸️
• 3: Next Song / Volume Up button ⏭️➕
• 4: Previous Song / Volume Down button ⏮️➖
• 5: USB Input port ?️
• 6: TF Card Input slot ?

Rear Panel Ports:

• AUX IN: Auxiliary audio input ?
• OPTICAL: Optical audio input ?
• DC-18V: Power input ⚡
• SUB OUT: Subwoofer output ?

LED Indicator: Displays status for Bluetooth ?, Optical ?, Aux ?, and USB ?️ modes.

Remote Control

Battery Installation

Follow these steps to install batteries in the remote control:

1. Open the battery compartment.
2. Insert batteries, observing polarity.
3. Close the battery compartment cover.

The effective working range of the remote control is +/- 30 degrees in both vertical and horizontal directions, up to 8 meters (approximately 26 feet).

Remote Control Functions:

• 1 [Power/Mode]: Short press for 1 second to power on ⏻, hold for 3 seconds to power off.
• 2 [MODE]: Short press to cycle through input modes: Bluetooth ?, Optical ?, Aux ?, USB ?️, and TF Card ?.
• 3 [MOVIE]: Selects movie audio mode.
• 4 [MUSIC]: Selects music audio mode.
• 5 [NEWS]: Selects news audio mode, optimized for dialogue clarity in talk shows, interviews, and news programs.
• 6 [BASS]: Selects bass-boosted audio mode for movies and music with strong bass.
• 7 [GAME]: Selects game audio mode, optimized for gaming and watching game videos.
• 8 [LED OFF]: Hold to turn the LED indicator on the soundbar on or off.

Using Your Soundbar System

Prepare for Use

Diagrams illustrate the setup process, including connecting the soundbar, subwoofer, and power.

Diagrams show how to attach mounting brackets and mount the soundbar on a wall, including specific dimensions for placement (e.g., 4mm, 25mm, 523mm/20.6 inches, 3mm/0.12 inches).

The final step shows connecting the subwoofer and the power adapter to the soundbar, and then plugging the power adapter into a wall outlet.

Placement

Table Placement

Place the soundbar on a solid, flat surface.

Wall Mounting Installation

Instructions and diagrams are provided for wall mounting the soundbar.

A. Connect to Your TV

Connect the soundbar to your TV using either a 3.5mm to RCA audio cable or a digital optical cable. Ensure the TV's audio output is set to external speakers and the audio format is set to PCM for optimal performance.

B. Connect to Other Devices

The soundbar can connect to various devices like PCs, laptops, and game consoles using the available input ports (AUX, Optical). A 3.5mm audio cable may be required if your device only has a 3.5mm output, as the included RCA cable might not be compatible.

C. Bluetooth Mode

To enter Bluetooth mode ?, use the remote control or the side buttons on the soundbar. When connected via Bluetooth, the indicator light will flash blue. The soundbar can be paired with devices like smartphones by selecting "Tapio V" from the Bluetooth list.

Specifications

• Peak Power: 100W
• Bluetooth Version: V5.0
• Speaker Driver: 2”*4 PCS (Soundbar) + 4"*1 PCS (Subwoofer)
• Functional Jacks: Optical ? *1, Aux ? *1, USB ?️ *1, TF ? *1
• Power Supply: DC 18V=2.33A, AC 110-240V 50/60 Hz
• Soundbar Dimensions: L806*W63*H60mm / 31.7*2.48*2.36 In
• Soundbar Weight: 1.43 Kg / 3.15 Lbs
• Subwoofer Dimensions: L140*W124*H300mm / 5.51*4.88*11.81 In
• Subwoofer Weight: 1.89 Kg / 4.17 Lbs

Safety Instructions

Follow these safety guidelines ⚠️:

• Avoid dropping the device.
• Do not disassemble the unit.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use only original or certified cables.
• Do not use corrosive cleaners or oils for cleaning.
• Protect the product from dripping or splashing water.

Regulatory Compliance

FCC Compliance

This equipment complies with FCC Part 15 rules for Class B digital devices, designed to provide reasonable protection against harmful interference in residential installations. It may generate, use, or radiate radio frequency energy and could cause interference if not installed and used as instructed. Users are advised to correct interference by reorienting antennas, increasing separation, connecting to a different circuit, or consulting a technician.

ISED Warnings (Canada)

This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS standards. Operation is subject to conditions preventing interference and requiring acceptance of any received interference.

The device meets exemption limits for routine evaluation according to RSS 102 RF exposure. Canadian users can obtain RF exposure and compliance information.

Declaration of Conformity

Guang Dong Substanbo Technology Co., Ltd. declares that the Ultimea Tapio V 2.1 Soundbar system conforms to essential requirements of Council Directive 2014/53/EU (RED) and RoHS (2011/65/EU). It complies with various harmonized standards including EN 55032:2015, EN 55035:2017, EN IC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, ETSI EN 301 489-1 V2.2.3 (2019-11), Draft ETSI EN 301 489-17 V3.2.0 (2017-03), EN 300 328 V2.2.2 (2019-07), EN 62311: 2008, EN 62368-1:2014/A11:2017, and IEC62321. The declaration was made by Lion Liao, Approbation Manager, in Shenzhen, China on April 28, 2022.

Correct Disposal of This Product

The symbol indicating Waste Electrical & Electronic Equipment ♻️ means this product should not be disposed of with household waste at the end of its life. To prevent environmental harm, separate it from other waste and recycle responsibly. Household users should contact their retailer or local government for recycling details. Business users should contact their supplier.