Aquasana Clean Water Machine

Filter Replacement Steps:

1. Twist the filter chamber cap counter-clockwise to remove the old filter. Discard the old filter responsibly.
2. Remove the protective plastic from the new filter. Insert the new filter into the filter chamber cap, ensuring a snug fit. Twist the cap clockwise to secure it to the housing unit.
3. Fill the water tank with fresh water and place it onto the dispenser dock.
4. Press the dock button three times quickly. The indicator light will turn solid red for 5 seconds.
5. With the red light illuminated, press and hold the dock button for 1 second. The light will blink red, indicating the system is flushing. The light will change from red to blue and stay blue for 5 seconds upon completion of the flush.
6. Once the flush is complete, the indicator light will blink blue for 5 seconds, followed by a solid blue light for 5 seconds.

Note: Do not consume the flushed water. Discard it appropriately.

Water for Life Program:

Protect your investment and save money with the Aquasana Water for Life program. This program offers benefits such as Extended Warranty, Discount Replacements, Free Shipping, and No Contract.

To learn more about the Water for Life program, contact Aquasana at waterforlife@aquasana.com.

Important Information:

The recommended replacement frequency for the AQ-CWM2-B filter is every 6 months or after 300 gallons of use. For optimal system performance and continued contaminant removal, use only certified, genuine Aquasana replacement filters.

For a comprehensive list of filtered contaminants, scan the QR code or visit Aquasana.com.