PETKIT PUROBOT MAX PRO 2 with Camera Self-Cleaning Cat Litter Box
User Manual
Please read the user manual carefully before use and keep it properly.
Table of Contents
The following sections provide detailed information:
- Packing List
- Product Description
- Product Installation
- Product Usage
- Cleaning and Maintenance
- Video Guide
- Basic Specifications
- A Message to Our Valued Customers
- Safety Instructions
01 Packing List
* Before installation and use, please check if the accessories are complete according to the following list:
- Main Unit: The primary self-cleaning cat litter box.
- User Manual: This document.
- Power Adapter: For powering the device.
- Odor Eliminator for Pets N60: Used in the smart odor remover.
- Odor Eliminator for Pets N50 2.0: Another odor elimination component.
- Honeycomb Fine Sieve for Cat Litter P99023: Exclusively for mineral cat litter.
- Magnetic Cat Litter Remover: For cleaning the litter.
- Waste Bag: For collecting waste.
02 Product Description
The PETKIT PUROBOT MAX PRO 2 features several key components:
- Cylinder: The main chamber where the litter and waste are contained.
- Fisheye Camera: Not detachable. Provides real-time monitoring of the litter box.
- Standard Cat Sieve P99022: Exclusively for tofu cat litter and mixed cat litter.
- Handle: Located at the bottom, used for lifting and moving the unit.
- Menu Button: For navigating settings.
- OLED Display Screen: Shows status and information.
- OK Button: Confirms selections.
- Wheel: Located at the base for stability or movement.
- High-Performance Mat for Cat Litter MAX P9220: Anti-stick, waterproof, scratch-resistant, and easy to clean.
- Indicator Light for Camera: Shows camera status.
- Microphone: For potential voice commands or alerts.
- Filling Light: Illuminates the cylinder for visibility.
- Proximity Sensor: Detects the cat's presence.
- Y-shaped Slot: Used to secure the drawstring of the waste bag.
- Handle for Waste Bin: Press the rear latch to pull out the waste bin.
- Magnetic Side Cover: Covers the side access.
- Air Inlet: For ventilation.
- Breezy Smart Odor Remover: Breaks down odors in the waste bin.
- Power Supply Port: Where the power adapter connects.
- Lock for Waste Bin Cover: Secures the waste bin compartment.
- Position for N50 2.0 Placement: Specific slot for the N50 odor eliminator.
- Waste Bin: Holds the waste bag.
- Door to Waste Bin: Access to the waste bin.
Note: Due to continuous product improvements, there may be slight variations in the actual product, including but not limited to appearance, structure, and color. Product images shown on packaging and marketing materials are for reference only.
Component Functions
| Component Name | Functional Description |
|---|---|
| Fisheye Camera | Real-time monitoring of pet toilets. |
| Cat Litter Sieve | Effectively filters clumps without sticking or missing. |
| High-Performance Mat for Cat Litter MAX P9220* | Anti-stick, waterproof, scratch-resistant, and easy to clean. |
| Odor Eliminator for Pets N50 2.0* | Breaks down odors in the waste bin to prevent them from spreading. |
| Y-shaped Slot | Used to secure the drawstring of the waste bag. Pack the waste bag without pulling out the waste bin. |
| Handle | Easy to lift and move the unit. |
| Breezy Smart Odor Remover* | Non-irritating; keeps the air in the cylinder fresh. |
* High-Performance Mat for Cat Litter MAX P9220 is hereinafter referred to as Cat Litter Mat.
* Odor Eliminator for Pets N50 2.0 is hereinafter referred to as N50.
* Breezy Smart Odor Remover is hereinafter referred to as smart odor remover.
03 Product Installation
3.1 Install Waste Bag
- Press the latch on the right to open the door. [arrow-right]
- Press the rear latch to pull out the waste bin.
- Remove the lid and place the waste bag into the waste bin, ensuring the bag lies flat at the bottom. Note: Fold the waste bag along the dashed line and ensure the dashed line is aligned with the edge of the waste bin. [dashed line indicator]
- Thread the drawstring through the Y-shaped opening to secure it. [Y-shaped slot with drawstring]
- Mount the lid. Note: The clasps on both sides must not press against the drawstring, and ensure the dashed line is aligned with the edge of the waste bin. [check mark for correct clasping, X mark for incorrect]
3.2 Install N50 and N60
- Insert the N50 and press firmly to secure it. [N50 unit being inserted]
- Reinstall the waste bin. [waste bin being slid back in]
- Close the door. [door closing]
- Remove the magnetic side cover. [magnetic cover being lifted off]
- Place the N60 into the smart odor remover. [N60 unit being placed into its housing]
- Reattach the magnetic side cover. [magnetic cover being placed back]
- Insert the power adapter into the unit and connect it to the power source. [power adapter plugged into the unit]
04 Product Usage
4.1 Device Binding
Note: Bind the device to the app before using it for the first time. The device can only be used after successful binding.
- Download the PETKIT app from the App Store or Google Play. Alternatively, scan the QR code to download and install. [QR code image description]
- Open the app, tap "+" to add the device, and follow the guide to bind the device. [App interface showing '+' button and device connection]
- The binding is successful when the following icon appears on the screen. [Display showing 'OK', 'Total toilet', and status icons]
More smart settings can be made in the app. [arrow-right indicator]
4.2 Add Cat Litter
Note: The cat litter should not be larger than 12 mm (0.47 in) in length and 3 mm (0.12 in) in diameter.
- Press the [OK button] to switch to "Maintenance Mode", then press the [Maintenance M icon] to perform this function, and the cylinder will start rotating.
- When the cylinder opening faces upwards, add cat litter and then press the [OK button] to exit "Maintenance Mode".
- Press the [OK button] twice, and the apparatus will automatically level the cat litter. [Display showing 'Level cat litter']
Warning for Cat Litter: The amount of cat litter must not exceed the MAX line.
4.3 Emptying Waste Bin
- Open the door and pull the drawstring to pack the waste bag. [arrow indicating pulling drawstring]
- Then pull out the waste bin and remove the packed waste bag. [waste bin being pulled out]
- Install a new waste bag. Note: Use a special waste bag for the waste bin.
4.4 Control Panel Description
1. Press the [function change icon] to switch functions and press the [OK button] to perform the selected function.
- Press and hold: Power On/Off.
- Press: Switch function. The screen displays the selected function.
- Press: Execute the selected function.
- Double Press: Level cat litter in the cylinder.
Description of Displayed Functions:
- Scoop ?️: Automatically sifts out clumps from the cat litter.
- Light ?: If there isn't enough light, you can turn on the camera's fill light to check the cylinder at night.
- Maintenance Mode ⚙️: Use this when adding cat litter or cleaning the unit.
- Reset ?: Adjusts the cylinder to the correct position.
- Deodorize ?: Turn on the smart odor remover to eliminate odors.
- Level Cat Litter ⬆️: Ensures the cat litter is evenly distributed in the cylinder. Use after adding cat litter.
- Empty Cat Litter ?️: Empties all cat litter from the cylinder.
- Connect to Network ?: Use this when binding the app.
2. Description of Displayed Status
- Network Connected ?
- Camera On ?
- Child Lock On ?
- Toilet Times Today: Displays the number of times the litter box has been used today.
3. Description of Other Prompts
There will be scrolling text at the bottom of the screen to describe the current status.
| Prompt | Description | Prompt | Description |
|---|---|---|---|
| ! Cat enters | The cat enters while the unit is operating (the unit will automatically pause and warn). | 25. Full waste bin | The waste bin is full. Please empty it in time. |
| 15. Insufficient cat litter | Cat litter is insufficient. Please add in time. | ! Magnetic side cover not installed | The magnetic side cover is not installed. Check if it is in place. |
| ! Device failure | Device error, check in the app. |
05 Cleaning and Maintenance
For the cat's health, it is recommended to regularly clean or replace these parts.
Warning: Unplug the unit or turn it off.
- Cylinder
- Fisheye Camera: Do not rinse or soak.
- Cat Litter Sieve: Do not rinse or soak.
- Cat Litter Mat
- Proximity Sensor: Do not rinse or soak.
- Base: Do not rinse or soak.
- N60: Replace regularly.
- Smart Odor Remover: Do not rinse or soak.
- N50: Replace regularly.
5.1 Empty Cat Litter Before Cleaning
Note: To avoid overflow, please replace with a new waste bag first.
- Align the magnetic cat litter remover with the cat litter sieve. When you hear a "Click" sound, the installation is successful. [description of alignment and click sound]
- Tap "Empty" in the app and empty the remaining cat litter in the cylinder according to the guide.
- After use, pinch to the left to pull out the cat litter remover. [description of pinching and pulling]
5.2 Detach Cylinder, Cat Litter Sieve, and Litter Mat
Note: Unplug the unit or turn it off before disassembly.
- Remove the magnetic side cover. [description of removing cover]
- Unlock the clasp. [description of unlocking clasp]
- Remove the cylinder. [description of removing cylinder]
- Place the cylinder against a wall. [description of placing cylinder]
- Grasp one side of the cat litter sieve.
- Press the cat litter sieve until it bends and separates from the two clasps (points A and B as shown in the image), then remove the sieve. [description of bending and removing sieve, indicating points A and B]
- Nip the handle of the cat litter mat to pull it out. [description of pulling mat]
5.3 Clean Main Unit and Parts
Warning: It is forbidden to rinse or soak the main unit; otherwise, the unit will be damaged. Wipe it dry only.
- Clean each corner of the cylinder with a brush and rinse it.
- Clean the cat litter sieve with a brush and rinse it. Wipe the litter mat with a soft cloth and water. Note: It is forbidden to scrub forcefully to avoid damaging the surface coating of the litter mat. Do not clean with alcohol, disinfectant, bleach, non-neutral cleaning agents, etc. [description of cleaning cylinder, sieve, and mat with brush/cloth and water]
- Wipe the main unit with a damp paper towel. Wipe the camera, smart odor remover, and proximity sensor with a soft cloth. (Regularly wipe the air inlet with a soft, dry cloth to ensure it is not obstructed.) [description of wiping unit, camera, sensor]
5.4 Install All Parts
Warning: Install all parts only when they are completely dry.
- Hold the cat litter mat, insert the upper part into the groove (the arrows must be aligned) and then insert the lower part into the groove (the arrows must be aligned). [description of inserting mat into grooves, aligning arrows]
- Gently press and release the litter mat; its two sides will naturally snap into the groove. Note: Ensure the green edge of the litter mat is fully seated in the groove and that the arrows on both ends are aligned with the indicated direction. [description of mat snapping into place, checking green edge and arrow alignment]
- Place the cat litter sieve into the cylinder and insert it at point A.
- Grasp the cat litter sieve and press it until it bends.
- Insert it at point B.
- Check: If the cat litter sieve can be shaken back and forth, the installation is successful. [description of checking sieve movement]
- Place the cylinder on the base and lock the clasp, ensuring it is securely fitted. [description of placing cylinder on base and locking]
- Reattach the magnetic side cover. [description of reattaching cover]
Maintenance Summary
| Part | When to Clean | How to Clean | When to Replace | How to Detach | Warning |
|---|---|---|---|---|---|
| Cylinder | When the inner surface is dirty | Clean with a brush | / | See 5.2 (2) | / |
| Cat Litter Sieve | Clean promptly when pet has loose stools | Clean with a brush | When bent or damaged | See 5.2 (5) | Avoid direct exposure to sunlight and do not pinch. |
| Cat Litter Mat | When dirty | Wipe with a soft cloth and water. Do not rub.* | When it sticks heavily to cat litter or is damaged | See 5.2 (7) | Do not clean with alcohol, disinfectant, bleach, non-neutral cleaning agents, etc. |
| Base | After detaching the cylinder | Wipe with a damp cloth | / | / | Do not rinse or soak. |
| Camera | When the surface is dusty or dirty | Wipe with a soft cloth | / | / | Do not rinse or soak. |
06 Video Guide
Scan to watch the video for installation and usage.
Scan to watch the video for cleaning and maintenance.Basic Specifications
Item Details Product Name PETKIT PUROBOT MAX PRO 2 WITH CAMERA SELF-CLEANING CAT LITTER BOX Product Model P9904 Material ABS, PP, TPE, Silicone Dimensions 538 x 657 x 603 mm (21.18 x 25.86 x 23.74 inches) Weight Approx. 11 kg (24.25 lbs) Rated Input 12 V 2A Connectivity Wi-Fi, BLE Usage Scope Cats older than 6 months
A Message to Our Valued Customers
- Thank you for choosing the PETKIT PUROBOT MAX PRO 2 WITH CAMERA SELF-CLEANING CAT LITTER BOX.
- Please read the user manual carefully before installing and using the product. All installation or usage indicates that you have read and accepted the safety guide below.
- PETKIT is not responsible or legally liable for accidents or damages resulting from improper use of the product.
- PETKIT reserves the right to interpretation and revision.
Safety Instructions
* Failure to follow the safety instructions below may result in product failure or other unforeseen losses.
- This appliance can be used by children aged 8 years and above, persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning safe use of the appliance and understand the hazards involved.
- Children must not play with the appliance.
- Children must not perform cleaning and maintenance without supervision.
- Install and use the unit according to the user manual.
- Kittens younger than 6 months are prohibited from using this unit. Cats weighing less than 1.5 kg are prohibited from using this unit.
- Do not pull the camera.
- Do not scratch the lens with sharp objects.
- Do not place the unit in an environment with high temperature or high humidity.
- Use the unit indoors. Avoid direct sunlight and keep away from fire.
- Even though the unit is powered by low voltage, electrical leakage may occur if the pet bites the power cord. Ensure your pets do not bite the power cord.
- Use only the official adapter to avoid damage to the unit or safety risks.
- Place the unit on a stable, level surface and avoid touching the wall.
- Do not tilt the unit to avoid safety risks.
- Do not rinse or soak the bottom of the unit.
- There are weight sensors at the bottom of the unit. Please handle it carefully.
- Unplug the unit if it is not used for a long period.
- Children should use this unit under the supervision and guidance of adults.
- Repairs should only be performed with professional guidance to avoid accidental damage.
- Do not place anything on top of the unit or press the top surface to avoid affecting the unit's normal function.
- Before leaving for a long period, ensure there is sufficient cat litter in the litter box and enough space in the waste bin.
- If you have any problems with the product, please contact customer service for assistance.
