SwitchBot Motion Sensor User Manual

Table of Contents

• 1. Package Contents
• 2. List of Components
• 3. Preparation
• 4. Getting Started
• 5. Safety Information
• 6. Detection Range
• 7. Light Sensor
• 8. How to Use
• 9. Battery Replacement, Firmware Upgrades and Resetting Factory Settings
• 10. Troubleshooting
• 11. Specifications
• 12. Warranty
• 13. Contact & Support
• 14. Warnings and Compliance

1. Package Contents

The package includes:

• Motion Sensor × 1
• User Manual × 1
• Base × 1
• AAA Battery × 2
• 3M Double-sided Adhesive Tape × 1

2. List of Components

The Motion Sensor has the following components:

• Mounting Slot (on the back/top)
• Reset Button (small pinhole on the side)
• LED Indicator Light & Light Sensor (front)
• Fresnel Lens (front)
• Base (with magnet, attaches to the back/bottom)
• Battery Case (on the back)

3. Preparation

You will need:

• A smartphone or tablet with Bluetooth 4.2 or later.
• The latest version of the SwitchBot app, downloadable from the Apple App Store or Google Play Store.
• A SwitchBot account (register or sign in via the app).

Note: A SwitchBot Hub Mini (sold separately) is required for Cloud Service features.

4. Getting Started

1. Open the battery cover. Insert two AAA batteries, observing the correct polarity (+ and -). Close the battery cover until it clicks into place.
2. Open the SwitchBot app and sign in to your account.
3. Tap the "+" icon at the top right of the home page. Find and select the Motion Sensor icon, then follow the on-screen instructions to complete the setup.

5. Safety Information

• Keep the device away from humid or hot environments.
• Remove batteries when the device is not used for extended periods.
• Do not attempt to disassemble, repair, or modify the device.
• Use only the specified type of batteries.

6. Detection Range

The motion sensor has a detection range of up to 9 meters (29.5 ft.) horizontally and covers a 110° horizontal and 55° vertical field of view. Optimal detection is achieved when installed between 1.2m and 2m above the ground. Installation lower than 1.2m may reduce the range, while installation higher than 2m may create blind spots.

For pet owners, installing the sensor 0.1m to 0.2m higher than the pet, with the reset button facing down, can help prevent false alarms triggered by pets.

7. Light Sensor

The built-in Light Sensor detects ambient light levels, sensing whether the environment is bright or dark. Users can define the threshold for 'bright' or 'dark' within the SwitchBot app settings for customized automation.

8. How to Use

Installation Methods:

Reset Button Facing Up (Standard Installation):

Recommended installation height is 1.2 to 2 meters (3.9 to 6.6 ft.) above the ground. The detection range is affected by height, as described in the "Detection Range" section.

Reset Button Facing Down (for Pet Owners):

Recommended installation height is 0.1 to 0.2 meters (3.9 to 7.9 inches) higher than pets to prevent false alarms.

Placement without the Base:

Place the Motion Sensor directly on a table or shelf, or attach it to a flat surface using the 3M double-sided adhesive tape. Ensure the lens faces the desired detection area and is positioned near the edge of the surface.

Placement with the Base:

Mount the base to the back or bottom of the Motion Sensor. The base can be attached to an iron surface (magnetically) or affixed to a flat surface using the 3M double-sided adhesive tape. After installation, the base allows tilting the sensor to a desired angle. Ensure the lens faces the desired detection area and is positioned near the edge of the surface.

Tips for Applying Adhesive Tape:

Ensure the target surface is dry and clean. Apply firm pressure to the Motion Sensor or base for 60 seconds after installation. Keep the device away from heat sources like light bulbs.

9. Battery Replacement, Firmware Upgrades and Resetting Factory Settings

Battery Replacement:

Open the battery cover, remove the old batteries, and insert two new AAA batteries, observing polarity. Close the battery cover until it clicks into place.

Firmware Upgrades:

SwitchBot regularly releases firmware updates to improve user experience, introduce new features, and fix software defects. When a new version is available, you will receive a notification in the app. Ensure the product has sufficient battery and your smartphone is within range during the upgrade process to prevent interference.

Resetting Factory Settings:

Long press the Reset button for 15 seconds, or until the LED indicator light turns on. After resetting, all settings will revert to default values, and logs will be erased.

10. Troubleshooting

Q: It is not sensitive within the detection range set during high temperature.

A: When room temperature reaches 36 °C (97 °F), which is close to human body temperature, the Motion Sensor's sensitivity may decrease. Cool the room by using an air conditioner or fan.

Q: There are a lot of false alarms.

A: Adjust the angle of your Motion Sensor to avoid areas like windows, heat sources, or places with constantly moving objects.

Q: How to enable Cloud Services?

A: A SwitchBot Hub Mini (sold separately) is required for Cloud Services. After setting up the Hub Mini, navigate to the app homepage. If a cloud icon appears on the Motion Sensor card, it indicates it's being scanned by the Hub Mini. Tap the card, go to Settings, and enable Cloud Services.

For more solutions, visit: https://support.switch-bot.com

11. Specifications

• Model: W1101500
• Size: Motion Sensor: 54 × 54 × 30 mm (2.1 × 2.1 × 1.2 in.); Base: 45 × 45 × 32 mm (1.8 × 1.8 × 1.3 in.)
• Weight: Motion Sensor: 56 g (2 oz.) (with batteries); Base: 19 g (0.7 oz.)
• Battery Life: 2 AAA batteries, approximately 3 years (based on 120 motion triggers, 40 light sensing triggers, and 20 local scene triggers daily at 25 °C [77 °F]).
• Operating Temperature: -10 °C to 60 °C (14 °F to 140 °F)
• Operating Humidity: 20% to 85% RH
• Maximum Detection Distance: 9 m (29.5 ft.)
• Maximum Detection Range: 110° horizontal and 55° vertical (results obtained from lab experiments at 25 °C [77 °F]).

12. Warranty

SwitchBot warrants this product to the original owner against defects in materials and workmanship. This limited warranty does not cover:

• Products submitted beyond the original limited warranty period.
• Products on which repairs or modifications have been attempted.
• Products subjected to falls, extreme temperatures, water, or operating conditions outside product specifications.
• Damage due to natural disasters (e.g., lightning, flood, earthquake, hurricane).
• Damage due to misuse, abuse, negligence, or casualty (e.g., fire).
• Other damage not attributable to manufacturing defects.
• Products purchased from unauthorized resellers.
• Consumable parts (including batteries).
• Natural wear and tear of the product.

13. Contact & Support

Setup and Troubleshooting: support.switch-bot.com

Support Email: support@wondertechlabs.com

Feedback: For concerns or problems, send feedback via the SwitchBot app through Profile > Feedback page.

14. Warnings and Compliance

CE/UKCA Warning

This product can be used in EU member states and the UK. RF exposure information indicates the device's EIRP power is below exempt conditions. The device complies with Directive 2014/53/EU (CE) and UK Radio Equipment Regulations (SI 2017/1206) (UKCA). Full text of declarations of conformity are available at support.switch-bot.com.

Manufacturer: Woan Technology (Shenzhen) Co., Ltd., Shenzhen, P.R.China.

EU Importer: Amazon Services Europe, Luxembourg.

Wi-Fi: 2412 MHz to 2472 MHz.

Operation Temperature: -10 °C to 60 °C.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference caused by the device, and acceptance of any interference received. The equipment has been tested and complies with limits for a Class B digital device. It generates and can radiate radio frequency energy. If harmful interference occurs, users are encouraged to reorient/relocate the antenna, increase separation, connect to a different circuit, or consult a dealer. Unauthorized modifications may void the user's authority to operate the equipment. The device meets general RF exposure requirements and can be used in portable exposure conditions without restriction.

IC Warning

This device contains license-exempt transmitter(s)/receiver(s) complying with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: no interference caused by the device, and acceptance of any interference received. The device complies with IC radiation exposure limits for uncontrolled environments and must be installed and operated at least 20cm from a radiator or body.

(French translation provided in original document regarding IC compliance.)

KCC Warning (Korean)

Information regarding the device: Manufacturer: Woan Technology(Shenzhen)Co., Ltd., Product Name: Motion Sensor, Model Name: W1101500, Manufacturing Date: January 2021, Manufacturer/Country: Woan Technology(Shenzhen) Co., Ltd./China. Certification Number: R-R-Woa-W1101500.

NCC Warning (Chinese)

Users are prohibited from altering frequency, increasing power, or changing original characteristics and functions of this low-power radio frequency device without approval. The use of this device must not affect aviation safety or interfere with lawful communication. If interference is found, cease use immediately and improve until no interference occurs. Lawful communication refers to radio communication operated according to telecommunications management regulations. Low-power radio frequency devices must tolerate interference from lawful communication or industrial, scientific, and medical radio frequency equipment.