Ievads
Thank you for choosing the Philips LED Lamp with Sensor. This energy-efficient LED lamp provides warm white light (2700K) and features integrated motion and daylight sensors for automatic operation. Designed for convenience and energy saving, this lamp is suitable for various indoor applications. Please read this manual carefully before installation and use to ensure proper function and safety.
Image: The Philips LED Lamp with Sensor, showcasing its standard bulb shape and integrated sensor at the top.
Drošības informācija
Uzstādot vai lietojot elektriskās ierīces, vienmēr ievērojiet pamata drošības pasākumus, lai samazinātu ugunsgrēka, elektriskās strāvas trieciena un miesas bojājumu risku.
- Izslēgt: Pirms uzstādīšanas vai nomaiņas vienmēr izslēdziet strāvas padevi pie galvenā ķēdes pārtraucēja.amp.
- Lietošanai tikai iekštelpās: Šī lamp is designed for indoor use. Do not expose it to water or excessive moisture.
- Pareiza bāze: Nodrošiniet lamp holder is compatible with an E27 base.
- Voltage: Verify that your electrical system's voltage (100-240V, 50Hz) matches the lampprasības.
- Neaptumšojams: Šī lamp is not dimmable. Do not use it with dimmer switches.
- Acu komforts: While designed for EyeComfort, avoid prolonged direct eye exposure to the light source.
Iepakojuma saturs
Iepakojumā ir:
- 1 x Philips LED Lamp with Sensor (Model 929002058731)
Uzstādīšanas instrukcijas
- Izslēgt strāvu: Before installation, ensure the power to the light fixture is completely turned off at the main circuit breaker.
- Noņemt veco Lamp: Carefully unscrew and remove the existing lamp from the E27 lamp turētājs.
- Instalējiet jaunu Lamp: Screw the Philips LED Lamp with Sensor into the E27 lamp holder until it is finger-tight. Do not overtighten.
- Pozicionēšana: For optimal sensor performance, ensure the sensor at the top of the lamp is not obstructed by the fixture or other objects. The sensor requires a clear line of sight for motion detection and ambient light measurement.
- Atjaunot jaudu: Turn the power back on at the main circuit breaker. The lamp will perform a brief self-test and then be ready for operation.
Image: The Philips LED Lamp with Sensor, illustrating its dimensions (12.2 cm height, 6.25 cm width) for proper fitting.
Lietošanas instrukcijas
Šis Philips LED lukturītisamp is equipped with both a motion sensor and a daylight sensor for automatic control.
- Automātiska ieslēgšana/izslēgšana: Lamp will automatically turn on when motion is detected in low light conditions (evening/night). It will turn off after a period of no motion or when sufficient ambient light is present (daytime).
- Dienas gaismas sensors: The integrated daylight sensor detects ambient light levels. The lamp will only activate due to motion when the surrounding light is below a certain threshold (e.g., in the evening or a dark room). It will remain off during daylight hours to save energy.
- Kustības sensors: The motion sensor detects movement within its detection range. Once motion is detected in low light, the lamp illuminates. If no further motion is detected, the lamp will turn off after approximately 60 seconds.
- Gaismas kvalitāte: Enjoy a comfortable, warm white light at 2700 Kelvin, designed to meet Philips EyeComfort requirements for reduced eye strain.
Image: Product packaging highlighting the motion and daylight sensor features, indicating automatic on/off functionality.
Sensor Functionality Demonstration
Video: This video demonstrates the functionality of an automatic light sensor system, showing how a light turns on in low ambient light conditions and off when it's bright. This illustrates the principle behind the Philips LED Lamp's integrated sensors.
Apkope
The Philips LED Lamp with Sensor requires minimal maintenance.
- Tīrīšana: Pirms tīrīšanas pārliecinieties, vai strāvas padeve ir izslēgta. Noslaukietamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the lamp's surface or sensor.
- Sensora zona: Keep the sensor area at the top of the lamp clean and free from dust or obstructions to ensure optimal performance.
Problēmu novēršana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Lamp neieslēdzas. |
|
|
| Lamp neizslēdzas. |
|
|
| Sensor sensitivity seems low. |
|
|
Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Zīmols | Philips |
| Modeļa numurs | 929002058731 |
| Gaismas veids | LED |
| Wattage | 8 vati |
| Kvēlspuldzes ekvivalents | 60 vati |
| Lamp Bāze | E27 |
| Gaiša krāsa | Silti Balts |
| Krāsu temperatūra | 2700 Kelvini |
| Gaismas plūsma | 806 lūmeni |
| Voltage | 100-240 volt |
| Biežums | 50 herci |
| Īpašas funkcijas | Motion Sensor, Daylight Sensor, Non-Dimmable, EyeComfort |
| Lietošana iekštelpās/ārā | Iekštelpās |
| Dzīves ilgums | 15,000 stundas |
| Izmēri (A x W) | 12.2 cm x 6.25 cm |
| Materiāls | Plastmasa |
Garantija un atbalsts
This Philips LED Lamp with Sensor comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Philips lighting website. If you encounter any issues or require technical assistance, please contact Philips customer support.
Tiešsaistes atbalsts: Apmeklējiet www.philips.com/support bieži uzdotajiem jautājumiem un saziņas iespējām.