Both devices’ volumes should be turned up. Ensure that the music is playing on your source device. Move the Bluetooth speaker as far away from metal objects and other potential interference-causing gadgets as you can. Make sure nothing is plugged into the wireless speaker’s AUDIO IN port.

You may enjoy full stereo sound quality without the necessity of cables or wires thanks to a special Bluetooth function known as True Wireless Stereo (TWS). This is how TWS operates: You connect your favourite Bluetooth music source to a primary Bluetooth speaker..

Press the “Power On” button on each speaker repeatedly until you hear the confirmation, “Power on, your speaker is ready to pair.” Any of the speakers’ “Mode” buttons should be long-pressed until you hear “Connected successfully.” The TWS mode of your speakers is currently established.

• By holding down the Power or Pairing button, you can put your Bluetooth device in pairing mode.
• iPhone: Select Other devices under Bluetooth settings. To connect, tap the gadget.
• Go to Settings > Connected devices > Bluetooth on an Android device. After choosing Pair new device, tap the speaker’s name.

The majority of wireless speakers connect to standard power outlets or power strips using AC adapters. To become “truly wireless,” some systems employ rechargeable batteries, although this feature necessitates repositioning and charging as routine tasks in order to use this type of surround sound system.

Place two speakers close to one another, then turn them both on by pressing button (2) simultaneously.
Wait for 2-4 seconds to let them pair after pressing and holding the button (4) on one of the Bluetooth speakers for a long time till there is another tone.

You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.

On your smartphone, tablet, or computer, access the settings menu. You can then proceed to enable your Bluetooth settings and choose the specified speaker. You are paired and prepared to jam when the speaker’s pair light turns solid.

Overall, adding wireless speakers to your home music system might be a terrific choice. The majority of speakers won’t be completely wireless and will require a power source to function. Even totally portable systems occasionally need to be recharged.

A speaker wire should be connected to each speaker’s positive terminal. The positive wires for both speakers should be connected to the same positive terminal. A speaker wire should be connected to each speaker’s negative terminal. Both ought to be connected to the same negative terminal on the amp’s output.

There is a tiny, pinhole button with the word “reset” on it in the device’s control section, frequently hidden by a rubber cover. To press this button, use a pencil or another pointed object. When you hear the gadget turn off, hold down the “volume down” and “power” keys simultaneously for around 6 seconds.

Turning Bluetooth on manually in your Android’s settings should prevent it from automatically turning on and off. It’s possible that you need to adjust your power saving settings if your Bluetooth connection is cutting out due to low battery.

The built-in lithium ion battery is fully charged if the CHARGE indication remains off when the speaker power is off and connected to an AC outlet. Even if the speaker is kept plugged into an AC outlet, the battery won’t be able to be charged any further after it has reached its maximum capacity.

Before charging or connecting your wireless Bluetooth speaker to its power source with a USB cable or AC adaptor, please be sure it is turned off.

If you play music through your Bluetooth speaker while it’s charging, it will keep going until the battery is fully charged. The speaker will turn off on its own when the battery is fully charged.