Installation Instructions
Holywell Plus Plug & Play Batten
| Input | 220-240V AC |
| Power | 18/36-25/50-28/56W |
| Operating Temp | 0°C—+40°C |
| Connection Type | Push Fit Terminal |
| Emergency Option | 430962 (Sold Separately) |
| Control Connection | 430916 (Sold Separately) |
| Light Source Energy Rating | B |
Box Contents:
- Holywell Batten
- Fixing Kit
Tools Required For Installation:
- Wire Strippers / Cutters
- Screwdriver
- Drill
https://lumineux.co.uk/subrange-list/holywell-batten-plug-play/
READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLATION
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT:
This product must be installed by a qualified electrician or competent person, and in accordance with current building and IET wiring regulations.
Warranty:
This luminaire is warranted for a period of Years from the date of purchase**. The warranty could be invalidated should the light fitting not be installed according to these instructions, outside the scope of the specification or the product has been altered or tampered with in any way. Please see website for terms and conditions.
WARNING: Risk of electric shock!
Isolate the mains power before proceeding.
- Turn off the mains power before performing inspections, installation, or removal
- Verify that the supply voltage is correct by comparing it with the luminaire label information
- It is the installers responsibility to ensure installation is suitable for the total load of the luminaire(s). The supply cable, fuses/circuit brakers must be correctly rated for the electrical load and considering for any transient inrush currents that may occur.
- Do not perform insulation strength or resistance tests on installed luminaire(s) connected
Installation Procedure:
- Disconnect the mains supply.
- Install the batten in desired location.
- Connect mains to terminal block as indicated—Standard version.
- Connect mains to terminal block as indicated—Emergency version.
- Select required wattage via dip-switch on LED driver.
5a. Select colour temperature via switch located in product base.
- Re-fit the diffuser and use screws provided to secure into position.
- Reconnect the mains supply.
Dimensions:
| Part No. | Description | L (mm) | W (mm) | H (mm) | LF (mm) | Weight |
| 431291 | Holywell Plus 18W/36W 4ft Twin | 1203 | 64 | 66 | 880 | 1.4Kg |
| 431292 | Holywell Plus 25W/50W 5ft Twin | 1503 | 64 | 66 | 1180 | 1.7Kg |
| 431293 | Holywell Plus 28W/56W 6ft Twin | 1803 | 64 | 66 | 1480 | 1.7Kg |
End Of Life Disposal:
Disassembly instructions for end of life disposal available on website.
Disposal of Electronic Equipment WEEE Directive 2002/96/EC This product falls within the scope of the Waste Electrical & Electronic Equipment Directive (WEEE), which means the product should not be disposed of as normal household waste. Please recycle where facilities exist or check with your Local Authority. RoHS – All components and materials used in this product are RoHS 2002/95/EC compliant. Specifications may change from time to time. The information contained in this leaflet is for guidance only and should not be considered as always accurate and should be treated as not representative.
Manby Park, Manby, Louth, Lincolnshire, LN11 8UT
Lumineux is a trading name of B&T Associates Ltd.
Rev L1.0 241867
www.lumineux.co.uk
Technical Helpline:
+44(0)1507 328031
Documents / Resources
 | Lumineux Holywell Plus Plug and Play Batten [pdf] Installation Guide Holywell Plus Plug and Play Batten, Holywell Plus, Plug and Play Batten, Play Batten, Batten |