SUN700 LCD Projector
“
Specifications:
- Projection Technology: LCD
- Resolution: Full HD 1920×1080
- Brightness: 3000 lumens
- Contrast Ratio: 2000:1
- Projection Distance: 1.2-5 meters
- Projection Size: 50-200 inches
Product Usage Instructions:
Safety Instructions:
In order to ensure safe use of the machine, be sure to read the
safety precautions carefully before use:
- Do not look directly into the lens when the projector is on, as
the strong light can hurt the eyes. - Avoid blocking the air outlet to prevent damage to the cooling
function of the internal electronic equipment. - Do not use chemicals or water to clean the projector; also,
avoid exposure to rain, moisture, and colorless liquid
corrosion. - Keep the projector and accessories out of reach of
children. - Maintain a dry and ventilated environment for the
projector.
Operating Guide:
- Connect the DC terminal of the power adapter to the AC port of
the projector. - When the red indicator light is on, press the power button on
the panel or use the remote control to start the machine. - Connect related devices to the projector.
- Adjust the focus knob for the best display effect.
- Select supported content to play.
Power Off Instructions:
To turn off the projector, press the power button on the
projector or remote. The indicator light will turn red from blue,
indicating that the projector has shut down.
Beyond Your Vision:
- Earphone output for connecting headphones or audio
amplifiers. - USB input for connecting storage devices such as USB drives for
playing video, audio, pictures, etc. - High Definition input for connecting high-definition signals
from set-top boxes, Blu-ray DVDs, computers, game consoles,
etc.
Focus Adjustment:
If the picture is blurry, adjust the focus wheel left and right
until achieving a clear image. The shortest effective distance for
screen focus is 1.2 meters.
Projector Modes:
Select the appropriate mode using the remote control:
- Desktop Front Projection
- Ceiling Front Projection
- Desktop Rear Projection
- Ceiling Rear Projection
FAQ:
1. How do I adjust a blurry image?
To adjust a blurry image, use the focus ring and keystone
adjustment features on the projector.
2. What should I do if the remote is unresponsive?
If the remote is unresponsive, check the battery and ensure
there are no obstructions between the remote and the projector’s IR
receiver.
“`
NSTRUCT N ANUA
!
ontents
Precautions……………………………………………………………..1 Accessories list…………………………………………………………1 Projector verviwe…………………………………………………..2 Remote Control……………………………………………………….3 xternal devices………………………………………………………. Focus………………………………………………………………………5 Quick Start………………………………………………………………5 Projector mode………………………………………………………..6 Troubleshooting guide……………………………………………..6 Specification……………………………………………………………7 Notice…………………………………………………………………….8
Safet y Inst ruct ion…………………………………………………….9
Safet Precautions
In order to ensure safe use of the machine,be sure to read it carefully before use.
arnin
o to use the ro ector correctly
. o not loo directly into the lens hen the ro ector is or in , the stro
n li ht ill hurt the eyes.
. o not bloc the air outlet to a oid dama in the coolin function of the
internal electronic e ui ment.
. o not use chemicals, cleaners or ater to clean, but also to a oid rain,
mois ture and colorless li uid corrosion of the circuit board.
. ee the ro ector and accessories out of reach of children.
. ee the or in en ironment of the ro ector dry and entilated.
. o not ut the ro ector in too hot or too cold en ironment, hi h or lo t
em erature ill shorten the ser ice life of the de ice. he o timum tem e
rature is
.
. o not use heatin e ui ment for dehumidi cation includin but not lim
ited to dryers and micro a e o ens.
. o not ress or lace hea y ob ects on the ro ector to re ent dama e
. o not thro , hit or sha e the ro ector to re ent dama e to the intern
al irin .
. Please contact after sales ser ice if you ha e any uestions. o not
disassemble yourself.
. o not re air the ro ector yourself, if the ro ector does not or
ro erly, lease contact after sales ser ice re air.
Accessories list
Pro ector
x1
Remote
x1
User manual
x1
Po er cord
x1
A cable
x1
Projector er ie
Lens IR Receiver Power
Cooling Window Headphone jack USB port
HDIN Port Power Socket Speaker
emote ontro
1 2 3 4 5 6 7 8 9
1 Power
10
2 Menu
3 Up
11
4 Left
5 Ok
12
6 Down
13
7 M ouse
8 Volume9 Mute 10 Hom e 11 Right 12 Return 13 Volume+
peratin uide Po er off on
urn on
1.Connect the DC terminal of the power adapter to the AC port of the projector. 2. hen the red indicator light is on , press the power button on the pa nel, or press the power key on the remote control to start the machine. 3.Connect related devices to the projector. .adjust the focus knob for the best display effect. 5.select the content that can be supported to play.
urn off
Press the power button on projector or remote, the indicator light turns red from blue,projector will shut down.
BEYOND YOUR VISION
1.Earphone output, can be connected to headphones, audio amplifiers, etc
2.USB input,connected to storage devices such as U disk and Portable storage device, playing video, audio, pictures, etc
3.High Definition input, connected to high-definition signals output from high-definition set-top boxes, Bluray DVDs, computers, high-definition game consoles, etc;
Focus
Is the picture blurry? Scroll the focus wheel left and right to adjust Screen focus (the shortest effective distance is 1.2 meters)
Focus wheel
Quick start
ABC
Electronic Keystone
ABC
FOCUS
Projector mode
o e elect Pro ector ode and ress the left and ri ht a rro eys of the remote control to select the corres ondin installation mode
Desktop Front Projection
Ceiling Front Projection
Desktop RearProjection
Ceiling Rear Projection
rou es ootin uide
1.Blurry mage
Adjust focus ring keystone.
Projector and screen wall must be in effective distance.
2.Remote Unresponsive
ake sure remote points at R receiver directly.
Do not cover R receiver.
Check the battery.
3.Upside Down mages
nter enu on projector or remote to flip the projection image.
. Factory Reset
o to enu Setting Restore Factory Default to restore the projector to default settings.
Specification
Model Lamp Image system Projection mode Working temp Operation mode Output port Input port Extended Memory USB input HDMI input
Headphone Output
Pow er Voltagt Product size Package size
Ca rt onSize (8 se t s/box )
LCD projector LED LCD Front or rear 0-55 Remote control Headphone HDMI/USB/Headphone jack
Support U disk and SSD solid state drive
USB HOST 2.0*1 Support HDMI 2.0 input
Audio output,3.5mm connector (headphones or speakers can be connected)
AC100~240V built-in powerboard 190*130*140mm 233*244*157mm 480*510mm*350mm
otice
EO OE
,gc||g~ege !/ ,gc||g~ege
Safety Instruction
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Documents / Resources
![]() | LUMI SUN700 LCD Projector [pdf] Instruction Manual SUN700, SUN700 LCD Projector, LCD Projector, Projector |