Lumens VC-TR41 Auto Tracking Camera Instruction Manual

VC-TR41 Auto Tracking Camera

“

Product Information

Specifications:

• Model: VC-TR41
• Power Source: Power adapter or Ethernet cable
• Connectivity: Ethernet

Product Usage Instructions

1. Device and Tool Preparation:

Before upgrading the firmware, ensure you have the following
devices and tools ready:

• VC-TR41 Camera
• PC or Laptop
• Power adapter and power cord or Ethernet cable

2. Connections:

To connect via switch or router, follow these steps:

1. Connect the camera to the switch or router using an Ethernet
   cable.
2. Connect your PC or Laptop to the switch or router using another
   Ethernet cable.

3. Firmware Update:

1. Open a browser and enter the IP address of the camera in the
   address bar (check IP address from [Status] > [Ethernet] in the
   menu).
2. Log in to the webpage using the following credentials:
   Account: admin
   Password: 9999 (Default)
3. Select [Maintenance] > […] to choose the firmware file and
   click [Upgrade].
4. The firmware download will start (approximately 2-3 minutes),
   do not close the page.
5. Log in to the webpage again and check the firmware version from
   [About] > [Firmware Version].

Frequently Asked Questions (FAQ)

Q: How do I know if the firmware update was successful?

A: After completing the firmware update process, log in to the
webpage and navigate to [About] > [Firmware Version] to verify
the updated firmware version.

Q: Can I use a different account to log in for the firmware
update?

A: No, for the firmware update process, please use the default
account credentials:
Account: admin
Password: 9999

“`

VC-TR41_TR41N Firmware(FW) Update Manual

1 Device and Tool Preparation

1.1 Please prepare following devices and tools before FW upgrade.

VC-TR41

PC or Laptop

Power adapter and power cord

or Ethernet cable

2 Connections 2.1 Connecting via switch or router.

Ethernet Cable

Ethernet Cable

Switch or Router

PC Laptop

3 FW Download 3.1 Open browser and enter the IP address of the camera in the address bar. You can check the IP address from [Status]> [Ethernet] in the menu.

3.2 Enter the account and password to log in webpage.
FW058 – VC-TR41_TR41N FW Update Manual

Account: admin Password: 9999(Default) 3.3 Select [Maintenance]> […] to select firmware file and press [Upgrade].
FW058 – VC-TR41_TR41N FW Update Manual

3.4 FW download starts, please don’t close the page. (Around 2-3 minutes taken) 3.5 Login webpage again and check the FW version from [About]> [Firmware Version].
FW058 – VC-TR41_TR41N FW Update Manual

Documents / Resources

Lumens VC-TR41 Auto Tracking Camera [pdf] Instruction Manual VC-TR41, TR41N, VC-TR41 Auto Tracking Camera, Auto Tracking Camera, Tracking Camera, Camera

References

• User Manual