Lucci 269675 Blake 1 Light Table Lamp

PRODUCT INFORMATION

To ensure correct function and safety, please read and follow all instructions carefully before assembly, installation and use of this product. Please keep the instructions for future reference.

Safety Tips

• Always ensure the power is OFF and the luminaire has cooled down before performing any maintenance, cleaning, changing the globe or making any adjustment to the luminaire.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• To avoid injury or damage to the luminaire, ensure that power leads and screws are secure before connecting the power.
• Young children should be supervised to ensure that they do not play with the portable lamp.
• Handle the luminaire and shade with care to avoid any damage or breakage.
• Select a suitable location away from liquids and hazards.
• To clean, wipe with a soft damp cloth. Do NOT soak or immerse the product in water or other liquids.
• Ensure that the luminaire does not come in contact with corrosive chemicals/solvents or abrasive cleaners etc.

Installation Requirements

• Select a suitable location for this luminaire:
  • Ensure it is on a flat and stable surface.
  • This product is suitable for indoor use only.
  • Do not place flammable material near or over the luminaire.
  • Ensure the luminaire is not installed in the direct line of an air vent/system.
  • If the luminaire is placed in an area prone to moisture, ensure that the area is well ventilated, and an appropriately rated exhaust fan is used if required. Damage or corrosion caused by moisture is not a product fault, and as such is notcovered under warranty.
• Do not exceed the maximum wattage rating. This luminaire is compatible with fancy round (G45) and candle (C35) globes only.
• Take care not to pull any electrical wires during unpacking, as this may damage the connection.
• Lay out all the components on a smooth surface and make sure no components are missing before assembling. If parts are missing, return the complete product to the place of purchase for inspection or replacement.
• Check whether the luminaire has been damaged during transport. Do not operate/install any product which appears damaged in any way. Return the complete product to the place of purchase for inspection, repair or replacement.
• Do not plug into the mains power socket-outlet before or during assembly. Only do so after the portable lamp is fully assembled with the globe installed and is ready to use for the first time.

Installation Directions

1. Remove all packaging material from the product. Place the portable luminaire (E) on a smooth non-scratch surface to help with assembly.
2. Select a suitable location for the portable luminaire (E). See the installation requirements above.
3. Remove the shade (A) from the portable luminaire (E) by loosening the nut (G) and the washer (F) from the screw (B)
4. Install a globe (C- not included) into the lamp holder (D). Do not exceed the maximum rated wattage.
   • NOTE: This luminaire is compatible with fancy round (G45) and candle (C35) globes only.
5. Install the shade (A) onto the portable luminaire (E) by tightening using the washer (F) and nut (G) into the screw (B)
6. After the portable luminaire is fully assembled, turn it around the right way up. (See Figure 1)
7. Insert the plug (I) into the mains power socket outlet and ensure it is fully plugged in.
8. Turn the power on at the mains power socket outlet.
9. Use the cord-line switch(H) to turn the luminaire on/off.

Specifications

*Compatible with fancy round (G45) and candle (C35) globes

Warranty

• This luminaire is covered by a 12-month warranty from the date of purchase. Please retain the proof of purchase.
• Warranty will be void if there is any damage due to improper usage or modification to the luminaire.
• Failure to comply with the instructions in this manual may increase the risk of damage or injury and will void the warranty.

FAQs

• Q: What should I do if the lamp flickers or does not turn on?
  • A: Check the light bulb to ensure it is securely connected. If the issue persists, try replacing the bulb with a new one.
• Q: Can I use a higher wattage bulb than recommended?
  • A: It is recommended to use the specified wattage bulb to prevent overheating and potential damage to the lamp.

Documents / Resources

Lucci 269675 Blake 1 Light Table Lamp [pdf] Instructions 269675, 269676, 269677, 269675 Blake 1 Light Table Lamp, 269675, Blake 1 Light Table Lamp, Light Table Lamp, Table Lamp

References

• User Manual