Ovetedot SS-001, SS-002, SS-003

Ovetedot 4-in-1 Milk Frother User Manual

Model: SS-001, SS-002, SS-003

Įvadas

Thank you for choosing the Ovetedot 4-in-1 Milk Frother. This appliance is designed to create various milk foams and warm milk for your favorite beverages, including lattes, cappuccinos, matcha, and iced coffee. Please read this manual thoroughly before first use to ensure safe and optimal operation.

Saugos instrukcijos

  • Always ensure the frother is placed on a stable, flat, and dry surface.
  • Nemerkite pagrindinio įrenginio, laido ar kištuko į vandenį ar kitus skysčius.
  • Šis prietaisas skirtas tik buitiniam naudojimui. Nenaudoti lauke.
  • Laikyti vaikams nepasiekiamoje vietoje.
  • Do not operate the frother if the cord or plug is damaged, or if the appliance malfunctions or has been dropped.
  • Visada atjunkite plaktuvą nuo elektros lizdo, kai jo nenaudojate ir prieš valydami.
  • Do not fill above the maximum fill lines indicated inside the frother for heating (13.5 oz / 400 ml) or frothing (5.1 oz / 150 ml).
  • Ensure the whisk is properly installed before operation.
  • The frother features automatic shut-off and temperature control for safety. It will turn off when the milk reaches approximately 149±9°F.

Produkto komponentai

Ovetedot 4-in-1 Milk Frother with accessories

The Ovetedot Milk Frother package includes the main frother unit, a whisk for frothing, a whisk for heating, a cleaning brush, and a spatula. The main unit features a sleek green design with a clear lid, an ergonomic handle, and a control panel with indicator lights.

  • Plaktuvo įrenginys: Main body with non-stick interior and stainless steel exterior.
  • Dangtis: Transparent lid to cover the frother during operation.
  • Plakimo šluotelė: Used for creating foam.
  • Šildymo šluotelė: Naudojamas pienui pašildyti be putų.
  • Valymo šepetėlis: For easy cleaning of the interior.
  • Mentele: For serving frothed milk.

Sąranka

  1. Išpakuoti: Atsargiai išimkite visus komponentus iš pakuotės.
  2. Išvalyti: Before first use, clean the interior of the frother and the whisks with warm soapy water. Rinse thoroughly and dry. Wipe the exterior with a damp audinys.
  3. Vieta: Place the frother on a clean, dry, and stable surface near a power outlet.
  4. Whisk Installation: Select the appropriate whisk (frothing or heating) and securely place it onto the pin at the bottom of the frother's interior.

Naudojimo instrukcijos

The Ovetedot Milk Frother offers four distinct modes for various milk preparations, all controlled with a single button.

Diagram showing 4 modes: Cappuccino, Latte, Iced Coffee, Chocolate Milk

This image illustrates the four modes available: Cappuccino (hot airy foam), Latte (hot dense foam), Iced Coffee (cold foam), and Chocolate Milk (warm milk). Each mode is designed to achieve a specific texture and temperature for your beverages.

Filling Capacities:

Vidinis view of frother showing max fill lines for heating and frothing, and minimum fill line

The frother has clear internal markings for maximum and minimum fill levels. The maximum capacity for heating milk is 13.5 oz (400 ml), and for frothing milk is 5.1 oz (150 ml). The minimum capacity for any operation is 2.5 oz (75 ml). Always adhere to these levels to prevent overflow or insufficient operation.

  • Max Capacity for Heating: 13.5 ml (400 uncijos)
  • Max Capacity for Frothing: 5.1 ml (150 uncijos)
  • Minimali talpa: 2.5 ml (75 uncijos)

Mode Selection and Operation:

Ensure the correct whisk is installed for your desired function. The frothing whisk is used for all foam types, while the heating whisk is for warm milk only.

  1. Pridėti pieno: Pour cold milk into the frother, ensuring it is between the MIN and appropriate MAX fill lines.
  2. Uždaryti dangtį: Tvirtai uždėkite dangtelį ant plaktuvo.
  3. Maitinimas: Plug the frother into a power outlet.
  4. Pasirinkite režimą:
    • Hot Dense Foam (Latte): Press the power button once. The indicator light will illuminate.
    • Hot Airy Foam (Cappuccino): Du kartus paspauskite maitinimo mygtuką.
    • Cold Foam (Iced Coffee): Paspauskite ir 2 sekundes palaikykite maitinimo mygtuką.
    • Warm Milk (Chocolate Milk): Paspauskite maitinimo mygtuką keturis kartus.
  5. Pradžia: The frother will begin operation automatically after mode selection.
  6. Užbaigimas: The frother will automatically shut off when the process is complete (approximately 2 minutes for frothing, or when optimal temperature is reached for heating).
  7. Patiekti: Carefully remove the lid and pour the frothed or warmed milk.
Close-up of milk being poured from frother into a cup, showing thick creamy foam

The frother is designed to produce delicate and thick creamy foam, enhancing the flavor of your coffee. It achieves an optimal foam ratio, stable texture, and warms milk to a comfortable temperature of 149±9°F.

Priežiūra ir valymas

Regular cleaning ensures the longevity and optimal performance of your Ovetedot Milk Frother. The non-stick interior and stainless steel exterior make cleaning simple.

Vidinis view of frother with water splashing, indicating easy cleaning, and a cleaning brush

The frother's interior is non-stick, allowing for easy rinsing. A dedicated cleaning brush is included to help remove any milk residue, ensuring thorough cleaning and hygiene.

  1. Atjunkite: Prieš valydami, visada atjunkite plaktuvą nuo elektros lizdo.
  2. Atvėsinti: Po naudojimo leiskite plaktuvui visiškai atvėsti.
  3. Pašalinti šluotelę: Carefully remove the whisk from the frother.
  4. Švarus interjeras: Rinse the interior of the frother with warm water immediately after use. Use the provided cleaning brush and a small amount of mild dish soap to remove any milk residue. The non-stick coating makes this process easy.
  5. Švarus šluotelė: Wash the whisk with warm soapy water.
  6. Švarus išorė: Nuvalykite putojimo aparato išorę su adamp audinys. Nenaudokite abrazyvinių valiklių ar šveitiklių.
  7. Sausas: Prieš sandėliavimą arba kitą kartą naudodami įsitikinkite, kad visos dalys yra kruopščiai sausos.
  8. Saugykla: Store the frother in a clean, dry place.

Note: Do not immerse the main frother unit (especially the base with electrical components) in water.

Trikčių šalinimas

ProblemaGalima priežastisSprendimas
Plastuvas neįsijungia.Not plugged in; power outlet issue; unit overheated.Ensure plug is securely in outlet. Test outlet with another appliance. Allow unit to cool down if recently used.
Milk not frothing or foam is thin.Incorrect whisk used; milk type not suitable; too much/too little milk.Ensure frothing whisk is installed. Use cold, fresh milk (dairy or non-dairy alternatives designed for frothing). Check milk level is between MIN and MAX frothing lines.
Pienas perpildytas.Įpilta per daug pieno.Do not exceed the MAX frothing (5.1 oz / 150 ml) or heating (13.5 oz / 400 ml) fill lines.
Plaktuvas sustoja per anksti.Automatic shut-off activated (optimal temperature reached); unit overheated.This is normal operation if optimal temperature is reached. If not, allow unit to cool down before next use.

Specifikacijos

  • Modelis: SS-001, SS-002, SS-003
  • Šildymo galia: 13.5 ml (400 uncijos)
  • Putojimo pajėgumas: 5.1 ml (150 uncijos)
  • Minimali talpa: 2.5 ml (75 uncijos)
  • Medžiaga: 304 Stainless Steel interior, non-stick coating.
  • Saugos savybės: ETL Certified, Automatic Shut-Off, Temperature Control (149±9°F).

Garantija ir palaikymas

For warranty information or technical support, please contact Ovetedot customer service. Refer to your purchase receipt for specific warranty terms and conditions.

Kontaktinė informacija:

  • Please visit the official Ovetedot store on Amazon for potential contact details or FAQs: Ovetedot Amazon Store

© 2025 Ovetedot. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.