Įvadas
Thank you for choosing the SHALL 2-in-1 Cordless Electric Hedge Trimmer and Grass Shear. This versatile tool is designed for efficient and precise trimming of hedges, bushes, and grass edges in your garden. This manual provides essential information for safe operation, proper setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Svarbios saugos instrukcijos
Prieš naudodami šį įrankį, visada perskaitykite ir supraskite visus saugos įspėjimus ir instrukcijas. Nesilaikant šių instrukcijų, gali kilti elektros smūgis, gaisras ir (arba) sunkūs sužalojimai.
- Asmeninis saugumas: Always wear appropriate personal protective equipment, including safety glasses, gloves, and sturdy footwear. Keep children and bystanders away while operating the tool.
- Dual Safety Design: This tool features a two-way safety lock. To start the device, the safety key on the rear strap must be inserted, and the side lock must be engaged simultaneously. This design prevents accidental activation.
- Darbo sritis: Ensure the work area is clear of obstacles, debris, and other people. Do not operate in wet conditions or near flammable liquids or gases.
- Akumuliatoriaus priežiūra: Use only the specified charger and battery. Do not expose the battery to extreme temperatures or direct sunlight.
- Ašmenų valdymas: Blades are sharp. Handle with extreme care. Always disconnect the battery before changing or cleaning blades.
- Priežiūra: Regularly inspect the tool for damage. Do not use if any part is damaged. Keep blades clean and sharp for best performance and safety.
Produktas baigtasview
The SHALL 2-in-1 Cordless Electric Hedge Trimmer and Grass Shear is a compact and powerful tool designed for various garden tasks. It features interchangeable blades for grass shearing and hedge trimming, powered by a 7.2V Li-ion battery.
Pagrindinės funkcijos:
- 2 viename funkcionalumas: Easily switch between grass shearing and hedge trimming.
- Galingas našumas: Equipped with a 2000 mAh Li-ion battery and a motor providing 1100 RPM no-load speed for efficient cutting.
- Greitas įkrovimas: Fully charges in approximately one hour using the included Type-C cable.
- Ergonomiškas dizainas: Lightweight (approximately 1.5 lbs / 0.68 kg) with an anti-slip rubber grip for comfortable extended use.
- Pasukama galvutė: The trimmer head can be rotated 180 degrees for precise cutting angles.
- Patvarūs peiliai: High-quality alloy steel blades ensure sharpness and durability.
Sąranka
1. Akumuliatoriaus įkrovimas
Before first use, fully charge the battery. The battery is integrated into the tool.
- Connect the Type-C cable to the charging socket on the tool.
- Įjunkite įkroviklį į standartinį maitinimo lizdą.
- The LED indicator will show the charging status. A full charge typically takes about one hour.
- Visiškai įkrovę atjunkite įkroviklį.
2. Attaching/Changing Blades
Įrankis tiekiamas su dviem keičiamais peiliais: žolės žirklių peiliu ir gyvatvorių žirklių peiliu.
- Ensure the tool is OFF and the safety key is removed.
- Locate the blade quick-release button on the side of the tool.
- Press and hold the quick-release button.
- Carefully remove the currently attached blade by sliding it off.
- Align the desired blade (grass shear or hedge trimmer) with the slot on the tool.
- Slide the new blade into place until it clicks securely. Release the quick-release button.
- Gently pull on the blade to ensure it is firmly attached before use.
Naudojimo instrukcijos
Always ensure the battery is sufficiently charged and the correct blade is installed for your task.
1. Activating the Tool (Dual Safety)
- Insert the safety key into its slot on the rear strap of the tool.
- Press and hold the side safety lock button.
- While holding the safety lock, press the ON/OFF trigger button to start the tool.
- Release the safety lock button once the tool is running. The tool will continue to operate as long as the ON/OFF trigger is pressed.
2. Žolės žirklių peilio naudojimas
The grass shear blade is ideal for trimming grass edges and small areas of lawn.
- Jei įmanoma, tvirtai laikykite įrankį abiem rankomis arba, jei patogu ir saugu, viena ranka.
- Position the grass shear blade parallel to the ground or desired cutting line.
- Move the tool steadily along the grass, allowing the blades to cut cleanly.
- Avoid forcing the tool through thick patches of grass to prevent stalling or damage.
3. Gyvatvorių žirklių peilio naudojimas
The hedge trimmer blade is suitable for shaping small hedges and bushes.
- Saugiai laikykite įrankį.
- For optimal results, use a sweeping motion, cutting small amounts of material at a time.
- The trimmer head can be rotated 180 degrees to adjust the cutting angle for different hedge shapes and accessibility. To rotate, ensure the tool is off, then gently twist the blade assembly.
- Do not attempt to cut branches thicker than the maximum cutting thickness (approximately 7.95mm).
Priežiūra
Regular maintenance ensures the longevity and safe operation of your SHALL 2-in-1 tool.
- Valymo peiliukai: After each use, ensure the tool is OFF and the battery is disconnected. Carefully clean the blades with a brush to remove sap, grass, and debris. A damp cloth can be used for the tool body.
- Tepimas: Apply a light machine oil or blade lubricant to the blades periodically to reduce friction and prevent rust.
- Saugykla: Store the tool in a dry, secure place, out of reach of children. Ensure the blades are clean and dry before storage.
- Baterijos saugykla: If storing for extended periods, charge the battery to approximately 50% and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
Trikčių šalinimas
Jei kyla problemų naudojant įrankį, žr. toliau pateiktas dažniausiai pasitaikančias problemas ir sprendimus:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Įrankis neįsijungia | Baterija neįkraunama Saugos raktas neįdėtas Apsauginis užraktas netinkamai įjungtas | Įkraukite akumuliatorių Įkiškite saugos raktą iki galo Ensure both safety lock and trigger are pressed simultaneously |
| Ašmenys nepjauna efektyviai | Ašmenys yra nuobodūs arba nešvarūs Material being cut is too thick | Clean and lubricate blades; consider sharpening or replacing if very dull Do not attempt to cut material exceeding maximum thickness |
| Įrankis sustoja veikimo metu | Baterija išsikrovusi Suaktyvinta apsauga nuo perkrovos | Įkraukite akumuliatorių Reduce the load on the blades; clear any jammed material |
Jei problema išlieka ir išbandžius šiuos sprendimus, susisiekite su klientų aptarnavimo tarnyba.
Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės ženklas | Turi |
| Modelis | SH112015EU |
| Maitinimo šaltinis | Maitinamas baterijomis |
| Baterijos tipas | 7.2 V 2000 mAh ličio jonų |
| Greitis be apkrovos | 1100 aps./min |
| Žolės žirklių pjovimo plotis | 82 mm (3.2 coliai) |
| Hedge Trimmer Cutting Area | 140 x 60 mm (5.5 x 2.4 colio) |
| Max Hedge Trimmer Cutting Thickness | 42 mm (1.65 inches) / 7.95 mm (0.31 inches) for branches |
| Ašmenų medžiaga | Legiruotasis plienas |
| Gaminio matmenys (I x P x A) | 28 cm ilgio x 12 cm pločio x 9 cm aukščio (11 cm ilgio x 4.7 cm pločio x 3.5 cm aukščio) |
| Prekės svoris | Approx. 0.68 kg (1.5 lbs) - tool only |
| Įkrovimo laikas | apytiksliai 1 valanda |
| Runtime (full charge) | apytiksliai 100 minučių |
Garantija ir palaikymas
SHALL products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official SHALL website. If you have any questions, require technical assistance, or need to report a defect, please contact SHALL customer support through the retailer where you purchased the product or directly via the manufacturer's contact channels.
Išsaugokite pirkimo įrodymą, kad galėtumėte kreiptis dėl garantijos.