Hyperice Hypervolt Heated Head Attachment User Manual

1. Įvadas

The Hyperice Hypervolt Heated Head Attachment is designed to enhance your percussion massage experience. This attachment is compatible with all Hypervolt models and helps to relax tight muscles and maintain range of motion by combining heat with percussion therapy.

Image 1.1: The Hyperice Hypervolt Heated Head Attachment.

2. Saugos informacija

Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in injury or damage to the device.

• Naudokite tik taip, kaip nurodyta.
• Nenaudoti ant atvirų žaizdų ar pažeistos odos.
• Consult a physician before use if you have a medical condition or are taking any medications.
• Stop use if you experience pain or discomfort.
• Laikyti vaikams nepasiekiamoje vietoje. Šis gaminys nėra skirtas naudoti vaikams.
• Nenaudokite miegodami ar vonioje.
• Atjunkite prietaisą, kai jo nenaudojate.
• Nenaudokite pažeisto maitinimo laido ar kištuko.
• Do not submerge in water or expose to rain or wet conditions.
• Do not use with oils, lotions, or creams.
• Do not exceed the recommended massage time without a break.
• This product is not a substitute for professional medical care.

Image 2.1: Regulatory markings on the base of the attachment.

3. Kas įskaičiuota

Your Hyperice Hypervolt Heated Head Attachment package includes:

• One (1) Hyperice Hypervolt Heated Head Attachment
• One (1) USB-C Charging Cable

Image 3.1: Contents of the package: Heated Head Attachment and USB-C cable.

4. Sąranka ir įkrovimas

4.1 Attaching to Your Hypervolt Device

1. Ensure your Hypervolt massager is powered off and compatible with the Heated Head Attachment.
2. Gently push and twist the Heated Head Attachment onto the Hypervolt massager's head slot until securely seated.

Image 4.1: The Heated Head Attachment being connected to a Hypervolt device.

4.2 Charging the Heated Head Attachment

The Heated Head Attachment has an internal battery that powers its heating function. Charge the attachment using the provided USB-C cable.

• Connect the USB-C cable to the charging port on the Heated Head Attachment.
• Kitą USB-C laido galą prijunkite prie suderinamo USB maitinimo adapterio (nepridedamas).
• A full charge provides approximately 75 minutes of heated operation.

Image 4.2: The Heated Head Attachment with its USB-C charging cable.

5. Naudojimo instrukcijos

Once the Heated Head Attachment is securely attached and charged, you can begin your heated percussion massage.

1. Power on your Hypervolt massager.
2. Press the single button on the Heated Head Attachment to cycle through the three heat levels:
   • 1 lygis: 109 °F (43 °C)
   • 2 lygis: 115 °F (46 °C)
   • 3 lygis: 120 °F (49 °C)
3. Apply the massager with the Heated Head Attachment to your desired muscle group for relaxation, pain relief, and increased blood flow.
4. To turn off the heat, cycle through the heat levels until the indicator lights are off, or power off the Hypervolt device.

Image 5.1: Using the Heated Head Attachment for neck massage.

Image 5.2: Applying the Heated Head Attachment to a thigh muscle.

6. Priežiūra

To ensure the longevity and optimal performance of your Heated Head Attachment, follow these maintenance guidelines:

• Valymas: Nuvalykite priedą su skelbimuamp cloth after each use. Do not use harsh chemicals or abrasive cleaners. Ensure the device is completely dry before storing or recharging.
• Saugykla: Store the attachment in a cool, dry place away from direct sunlight and extreme temperatures.
• Akumuliatoriaus priežiūra: Kad baterija tarnautų ilgiau, venkite dažnai visiškai iškrauti bateriją. Reguliariai kraukite įrenginį, net jei jo nenaudojate ilgą laiką.

7. Problemų sprendimas

If you encounter any issues with your Hyperice Hypervolt Heated Head Attachment, consider the following:

• Nėra karščio: Ensure the attachment is fully charged. Verify that the heat setting is activated by pressing the button.
• Attachment Not Secure: Re-attach the head, ensuring it is pushed and twisted firmly into place on your Hypervolt device.
• Įkrovimo problemos: Check the USB-C cable for damage and ensure it is properly connected to both the attachment and a working power source.

For further assistance, please contact Hyperice customer support.

8. Specifikacijos

8.1 pav.: Išsamus view of the Heated Head Attachment.

9. Garantija ir palaikymas

For warranty information and customer support, please visit the official Hyperice websvetainėje arba susisiekite su jų klientų aptarnavimo skyriumi. Išsaugokite pirkimo įrodymą garantiniams reikalavimams.

Gamintojas: Hiperice

Websvetainė: www.hyperice.com