PuraFlame EF361B

PuraFlame 16-inch Electric Fireplace Log Heater (Model EF361B) Instruction Manual

Model: EF361B

Įvadas

Ačiū, kad pirkoteasing the PuraFlame Electric Fireplace Log Heater. This manual provides important information for the safe operation, installation, maintenance, and troubleshooting of your new electric fireplace log heater. Please read all instructions carefully before using the product and retain this manual for future reference.

Svarbi saugos informacija

ĮSPĖJIMAS: Kad sumažintumėte gaisro, elektros smūgio ar sužalojimo riziką, laikykitės šių nurodymų:

  • Prieš naudodami šį šildytuvą, perskaitykite visas instrukcijas.
  • Šis šildytuvas naudojimo metu įkaista. Kad išvengtumėte nudegimų, neleiskite plika odai liesti karštų paviršių. Laikykite degias medžiagas, tokias kaip baldai, pagalvės, patalynė, popieriai, drabužiai ir užuolaidos, bent 0.9 m atstumu nuo šildytuvo priekio ir atokiau nuo šonų bei galo.
  • Ypatingas atsargumas yra būtinas, kai bet kurį šildytuvą naudoja vaikai arba neįgalūs asmenys, arba kai šildytuvas yra veikiamas be priežiūros.
  • Visada atjunkite šildytuvą, kai jo nenaudojate.
  • Nenaudokite šildytuvo su pažeistu laidu ar kištuku arba kai šildytuvas sugedo, buvo numestas ar kaip nors pažeistas. Grąžinkite šildytuvą į įgaliotą techninės priežiūros centrą, kad būtų atliktas patikrinimas, elektrinis ar mechaninis sureguliavimas arba remontas.
  • Nenaudoti lauke.
  • Niekada nestatykite šildytuvo ten, kur jis gali įkristi į vonią ar kitą vandens talpą.
  • Netieskite laido po kilimu. Neuždenkite laido kilimėliais, bėgiais ar panašiomis dangomis. Laidą laikykite toliau nuo eismo zonos ir ten, kur jis neužkliūtų.
  • Norėdami atjungti šildytuvą, išjunkite valdiklius, tada ištraukite kištuką iš lizdo.
  • Nekiškite ir neleiskite pašaliniams daiktams patekti į ventiliacijos arba išmetimo angas, nes tai gali sukelti elektros smūgį, gaisrą arba sugadinti šildytuvą.
  • Kad išvengtumėte galimo gaisro, jokiu būdu neuždenkite oro įleidimo ar išleidimo angų. Nenaudokite ant minkštų paviršių, pavyzdžiui, lovos, kur angos gali užsikimšti.
  • Šildytuvo viduje yra įkaitusių ir kibirkščiuojančių dalių. Nenaudokite jo vietose, kur naudojamas arba laikomas benzinas, dažai ar degūs skysčiai.
  • Naudokite šį šildytuvą tik taip, kaip aprašyta šiame vadove. Bet koks kitas gamintojo nerekomenduojamas naudojimas gali sukelti gaisrą, elektros smūgį arba sužaloti žmones.
  • Šildytuvus visada junkite tiesiai į sieninį elektros lizdą / lizdą. Niekada nenaudokite su ilginamuoju laidu arba perkeliamu maitinimo čiaupu (išvadu / maitinimo juosta).
  • This heater includes an automatic overheat protection system. If the heater overheats, it will automatically shut off. To reset, unplug the heater from the electrical outlet for 5 minutes, then plug it back in.

Pakuotės turinys

  • PuraFlame Electric Fireplace Log Heater (Model EF361B)
  • Instrukcijų vadovas

Please check that all components are present and undamaged. Contact customer service if any items are missing or damaged.

Produktas baigtasview

The PuraFlame Electric Fireplace Log Heater is designed to provide realistic flame effects and supplemental heat. It features a compact design suitable for various fireplace openings or freestanding use.

PuraFlame Electric Fireplace Log Heater, front view

1 paveikslas: Priekyje view of the PuraFlame Electric Fireplace Log Heater, showcasing the realistic log set and ember bed with flame effects.

PuraFlame Electric Fireplace Log Heater, front view su valdikliais

2 paveikslas: Priekyje view of the log heater, highlighting the control panel on the right side.

PuraFlame Electric Fireplace Log Heater, side view su valdikliais

3 paveikslas: Šoninė view of the log heater, showing the power switch and thermostat knob.

Pagrindiniai komponentai:

  • Realistic Log Set and Ember Bed: Creates the visual effect of burning logs.
  • Flame Effect Panel: Projects dynamic flame visuals.
  • Valdymo skydelis: Includes power switches and thermostat knob.
  • Heater Vent: Located at the front, for heat output.

Sąrankos instrukcijos

The PuraFlame Electric Fireplace Log Heater is designed for easy setup with no complex installation required. It is suitable for freestanding use or placement within existing fireplace openings.

  1. Išpakuokite įrenginį: Carefully remove the log heater from its packaging. Retain packaging for future storage or transport.
  2. Vieta:
    • Padėkite įrenginį ant tvirto, lygaus paviršiaus.
    • Ensure the unit is positioned at least 3 feet (0.9 m) away from combustible materials such as curtains, furniture, bedding, and paper.
    • If placing in an existing fireplace opening, ensure the opening dimensions are sufficient to accommodate the unit (16" W x 12.5" H x 9.4" D). No vents are required for the unit itself.
  3. Elektros jungtis:
    • Ensure the power switch on the unit is in the "OFF" position.
    • Plug the power cord directly into a 120V, 60Hz grounded electrical outlet. Do not use extension cords or power strips.
PuraFlame Electric Fireplace Log Heater placed inside a white fireplace mantel

4 paveikslas: The electric log heater positioned within a decorative fireplace mantel, demonstrating a typical setup.

Naudojimo instrukcijos

The PuraFlame Electric Fireplace Log Heater offers simplified controls for flame effects and heating functions.

Valdymo skydelis:

The control panel is located on the right side of the unit (refer to Figure 2 and Figure 3 for visual reference).

  • Main Power Switch (I/O): Turns the entire unit ON or OFF.
  • Flame Effect Switch: Activates or deactivates the realistic flame and ember bed effect. This can be operated independently of the heater.
  • Heater Power Switches (750W/1500W):
    • One switch for 750W heat output.
    • A second switch for 1500W heat output. Both switches can be engaged for maximum heat.
  • Termostato rankenėlė: Adjusts the desired room temperature. The heater will cycle ON and OFF to maintain the set temperature.

Pagrindinė operacija:

  1. To Turn On Flame Effect: Flip the main power switch to "I" (ON), then flip the flame effect switch to "I" (ON). The realistic logs and ember bed will illuminate with dynamic flame visuals.
  2. To Turn On Heater:
    • Ensure the main power switch is "ON".
    • Select the desired heat output by flipping one or both heater power switches (750W or 1500W).
    • Adjust the thermostat knob to your preferred temperature setting. The heater will activate when the room temperature falls below the set point and deactivate when it reaches the set point.
  3. Išjungti: Flip all switches to "O" (OFF) and then unplug the unit from the wall outlet when not in use for extended periods.
Iš arti view of the realistic log set and glowing ember bed

5 paveikslas: Išsamus view of the illuminated log set and ember bed, demonstrating the life-like flame effect.

Priežiūra

Regular maintenance ensures the longevity and optimal performance of your electric fireplace log heater. Always unplug the unit before performing any maintenance.

  • Valymas:
    • Reguliariai valykite įrenginį minkšta šluoste.amp audinys.
    • Do not use abrasive cleaners or sprays on the unit.
    • Ensure the air intake and exhaust vents are free from dust and debris to maintain proper airflow.
  • Lemputės keitimas: The flame effect uses LED technology, which typically does not require bulb replacement. If the flame effect malfunctions, contact customer service.
  • Saugykla: If storing the unit for an extended period, unplug it and store it in a dry, cool location, preferably in its original packaging.

Trikčių šalinimas

If you experience issues with your PuraFlame Electric Fireplace Log Heater, refer to the following common problems and solutions:

ProblemaGalima priežastisSprendimas
Įrenginys neįsijungia.
  • Neprijungtas.
  • Pagrindinis maitinimo jungiklis yra IŠJUNGTAS.
  • Išjungtas grandinės pertraukiklis.
  • Įjungta apsauga nuo perkaitimo.
  • Ensure unit is securely plugged into a grounded outlet.
  • Flip main power switch to ON.
  • Check household circuit breaker and reset if tripped.
  • Unplug unit for 5 minutes, then plug back in.
Nėra šilumos perdavimo.
  • Heater power switches are OFF.
  • Per žemas termostato nustatymas.
  • Įjungta apsauga nuo perkaitimo.
  • Flip heater power switches to ON (750W or 1500W).
  • Padidinkite termostato nustatymą.
  • Unplug unit for 5 minutes, then plug back in.
Liepsnos efektas neveikia.
  • Flame effect switch is OFF.
  • Pagrindinis maitinimo jungiklis yra IŠJUNGTAS.
  • Flip flame effect switch to ON.
  • Flip main power switch to ON.
Įrenginys skleidžia neįprastą triukšmą.
  • Normalus ventiliatoriaus veikimas.
  • Obstruction in fan/heater area.
  • A low hum from the fan is normal during heating.
  • Unplug unit and check for any obstructions in the vents.

If the problem persists after trying these solutions, please contact PuraFlame customer service.

Specifikacijos

FunkcijaDetalė
Modelio numerisEF361B
Maitinimo šaltinisSu laidu elektra
ttage120V, 60Hz
Šilumos išėjimas750W / 1500W
Matmenys (G x P x A)9.4" x 16" x 12.5"
MedžiagaMetalas, Derva
Diegimo tipasPastatomas
Prekės svoris9.3 svaro
SertifikataiCSA sertifikuota
Diagram showing the dimensions of the PuraFlame Electric Fireplace Log Heater

6 paveikslas: Dimensional diagram of the PuraFlame Electric Fireplace Log Heater, indicating width, height, and depth.

Garantija ir klientų aptarnavimas

Garantija: This PuraFlame Electric Fireplace Log Heater (Model EF361B) comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accident, modification, or unauthorized repair.

Klientų aptarnavimas: For any questions, assistance, or warranty claims, please contact PuraFlame customer service. Our team is ready to help you with any issues you may encounter.

Please visit the official PuraFlame webkontaktinę informaciją rasite svetainėje arba pirkimo dokumentuose.

© 2024 PuraFlame. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.