1. Produktas baigtasview
The Kibiy MS-672 Head Shaver Replacement Blades are designed to provide an efficient and comfortable shaving experience. These advanced 6D floating heads adapt to the contours of your face and neck, ensuring a close shave with minimal irritation. Made from hypoallergenic stainless steel, the blades are gentle on the skin and feature self-sharpening technology for lasting performance.

Image: Close-up of the 6D floating shaving head, highlighting its double ring cutter and precise cutting capabilities.
2. Diegimo vadovas
Follow these steps to correctly install the Kibiy MS-672 replacement head onto your shaver:
- 1 veiksmas: Gently pull the existing shaver head upwards to detach it from the shaver body.
- 2 veiksmas: Locate the buckle mechanism on the shaver body where the head connects.
- 3 veiksmas: Align the new Kibiy 6-blade replacement head with the buckle and push it down firmly until it clicks securely into place.

Image: Visual guide demonstrating the three-step process for replacing the shaver head, including measurements for buckle compatibility.
Suderinamumas
These replacement blades are designed for the Kibiy MS-672 model and other compatible shavers that utilize the same buckle design. Refer to the image below for visual confirmation of compatible and incompatible models.

Image: A selection of shaver models, clearly marking those that are compatible with the Kibiy 6-blade replacement head and those that are not.
3. Naudojimo instrukcijos
For optimal results, ensure your shaver is fully charged before use. The 6D floating heads are engineered to follow the contours of your head and face, providing a smooth and efficient shave. Apply gentle pressure and move the shaver in circular motions across the desired area.

Image: A visual representation of the shaver adapting to different facial and head contours for a clean shave.
Naudojimo demonstravimas
Video: A detailed demonstration of the Kibiy Head Shaver in use, showcasing its effectiveness for men's shaving routines.
4. Priežiūra ir valymas
Regular cleaning of your shaver head is crucial for maintaining hygiene and optimal performance. The Kibiy replacement head is designed for easy cleaning.
- 1 veiksmas: Detach the shaver head from the shaver body.
- 2 veiksmas: Open each individual blade compartment.
- 3 veiksmas: Rinse the blades and the shaver head thoroughly under running water. The shaver is IPX7 waterproof, allowing for full body washability.
- 4 veiksmas: Prieš surinkdami, leiskite visoms dalims visiškai išdžiūti ore.

Image: The shaver head opened up, with water droplets, demonstrating its easy-to-clean design.
Cleaning Demonstration
Video: A short video demonstrating the easy cleaning process of the Kibiy Head Shavers under running water.
5. Problemų sprendimas
If you encounter any issues with your Kibiy MS-672 replacement blades, consider the following:
- Nuobodulys: If the shave quality decreases, it may be time to replace the blades. While the blades are self-sharpening, they have a finite lifespan.
- Odos dirginimas: Ensure the blades are clean and free of debris. Always shave on clean skin, and consider using shaving cream or gel for added lubrication. If irritation persists, consult a dermatologist.
- Prastas našumas: Verify that the shaver head is correctly installed and securely attached to the shaver body. Ensure the shaver itself is fully charged.
For further assistance, please contact Kibiy customer service.
6. Specifikacijos
| Gaminio matmenys | 1.97 x 1.97 x 1.18 colio |
| Prekės svoris | 1.45 uncijos |
| Modelio numeris | MS-672 (Internal: 6724) |
| Gamintojas | Kibiy |
| Ypatinga funkcija | Nuimama galvutė |
| Maitinimo šaltinis | Maitinamas baterijomis |
7. Garantija ir palaikymas
Kibiy is committed to customer satisfaction. For any questions, concerns, or assistance regarding your Kibiy head shaver or replacement head, please contact our dedicated customer service team. The product typically comes with a return policy allowing for refund or replacement within 30 days of purchase, subject to retailer terms.