YOCTOP LED Smart Remote Control User Manual

1. Įvadas

This manual provides detailed instructions for the proper setup, operation, and maintenance of your YOCTOP LED Smart Remote Control for GoPro Hero cameras. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

2. Produktas baigtasview

The YOCTOP LED Smart Remote Control is designed to provide convenient and efficient control over your GoPro Hero camera. Its compact and durable design makes it suitable for various environments.

2.1 pav.: priekis view of the YOCTOP LED Smart Remote Control.

2.1 Komponento identifikavimas

Figure 2.2: Layout of the remote control with labeled components.

• Įkrovos indikatorius: Rodo įkrovimo būseną.
• Būsenos indikacija: LED lights indicating current camera mode (video, photo, time-lapse) and connection status.
• Užrakto mygtukas: Initiates and stops recording or captures photos.
• Shortcut Button (Star): Configurable button for quick access to a favorite sub-mode.
• Maitinimo / režimo mygtukas: Powers the device on/off and switches between main camera modes.
• Setting Button (Wrench): Used to switch between sub-modes within a main mode.
• Įkrovimo prievadas: Įkrovimo laido prijungimui.
• Virvelės skylė: Riešo dirželiui arba virvelei pritvirtinti.

3. Sąranka

3.1 Nuotolinio valdymo pulto įkrovimas

The remote control comes with a built-in Lithium Polymer battery. Before first use, fully charge the remote. Connect the charging cable to the Charging Port (Figure 2.2) and a suitable USB power source. The Charge Indicator will show the charging status.

3.2 Pairing with GoPro Camera

To establish a connection between the remote and your GoPro camera:

1. Ensure both the remote and the GoPro camera are powered on.
2. On your GoPro camera, navigate to the connection settings and enable remote control pairing. Refer to your GoPro camera's user manual for specific steps.
3. On the YOCTOP remote, press and hold the Power/Mode button until the remote enters pairing mode (indicated by flashing lights).
4. Once the remote and camera are in pairing mode, they should automatically connect. The remote's status indicators will confirm a successful connection.

4. Naudojimo instrukcijos

The YOCTOP Smart Remote Control offers intuitive operation for various GoPro functions. The following instructions detail common operations:

• Switch Main Modes: Paspauskite Maitinimas / režimas button to cycle through the main camera modes (e.g., Video, Photo, Time-Lapse). The corresponding LED indicator on the remote will illuminate.
• Switch Sub-Modes: Paspauskite Setting (Wrench) button to cycle through sub-modes within the currently selected main mode (e.g., different video resolutions, photo bursts).
• Set Shortcut Sub-mode: To set a favorite sub-mode as a shortcut, navigate to the desired sub-mode on your camera, then press and hold the Shortcut (Star) button on the remote for 3 seconds. The remote will confirm the setting.
• Jump to Shortcut Sub-mode: Once a shortcut is set, a single press of the Shortcut (Star) button will instantly switch the camera to that pre-configured sub-mode.
• Pradėti įrašymą / fotografuoti: Paspauskite Shutter (Red Circle) button to start video recording or capture a photo, depending on the current mode. The camera's recording indicator will activate.
• Paryškinti Tag: Įrašymo metu paspauskite Shutter (Red Circle) button briefly to add a highlight tag to your footage. This marks important moments for easier editing later.
• Sustabdyti įrašymą: Paspauskite Shutter (Red Circle) button again to stop video recording.
• Turn Off Camera: To power off the connected GoPro camera via the remote, press and hold the Maitinimas / režimas button for 3 seconds. The camera will display a power-off message.

Figure 4.1: The remote control can be worn on the wrist for convenient access.

5. Priežiūra

Proper care ensures the longevity and performance of your remote control.

• Valymas: Nuvalykite nuotolinio valdymo pultą minkšta šluoste,amp audinys. Nenaudokite stiprių cheminių medžiagų ar abrazyvinių valiklių.
• Saugykla: Nuotolinio valdymo pultą laikykite vėsioje, sausoje vietoje, apsaugotoje nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų.
• Atsparumas vandeniui ir dulkėms: The remote is designed to be water and dust proof. Ensure the charging port cover is securely closed before exposing it to water or dust. While designed for resistance, avoid prolonged submersion or high-pressure water jets.

Figure 5.1: The remote control features real water and dust proof design.

6. Problemų sprendimas

If you encounter issues with your YOCTOP Smart Remote Control, refer to the following common solutions:

• Remote not connecting to GoPro:
  • Įsitikinkite, kad abu įrenginiai yra visiškai įkrauti.
  • Verify that the GoPro's wireless connections are enabled and in pairing mode.
  • Try restarting both the remote and the GoPro camera.
  • If previously paired, try unpairing and re-pairing the devices.
• Nuotolinis nereaguoja:
  • Patikrinkite nuotolinio valdymo pulto baterijos lygį.
  • Ensure the remote is within range of the GoPro camera.
  • Perform a soft reset by holding the Power/Mode button for an extended period (e.g., 10 seconds) until it restarts.
• Buttons not functioning correctly:
  • Ensure no debris or foreign objects are obstructing the buttons.
  • Jei problema išlieka, susisiekite su klientų aptarnavimo tarnyba.

7. Specifikacijos

8. Garantija ir palaikymas

For warranty information or technical support, please refer to the product packaging or contact YOCTOP customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.