Įvadas
Thank you for choosing the NOVSIGHT A500-N35 Series LED Headlight/Fog Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED bulbs. Please read this manual thoroughly before installation and keep it for future reference.
The A500-N35 series offers superior brightness and a precise beam pattern, enhancing visibility and driving safety. Designed for easy installation, these bulbs are a direct replacement for HB4 9006 halogen bulbs in most vehicles.
Saugos informacija
Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to the product or vehicle.
- Ensure the vehicle's engine is off and the battery is disconnected before beginning installation to prevent electrical shock.
- Dėvėkite tinkamą saugos įrangą, įskaitant pirštines ir akių apsaugą.
- Avoid touching the LED chips directly, as oils from your skin can reduce their lifespan.
- Do not look directly into the illuminated LED bulb, as it can cause eye damage.
- Laikykite gaminį vaikams nepasiekiamoje vietoje.
- Jei abejojate dėl kurios nors montavimo proceso dalies, kreipkitės į kvalifikuotą automobilių techniką.
Pakuotės turinys
Prieš tęsdami montavimą, patikrinkite, ar visi komponentai yra ir nepažeisti.
- NOVSIGHT A500-N35 LED Headlight/Fog Lamp Bulbs (2x)
- Instrukcijų vadovas (šis dokumentas)
Note: Additional accessories may vary depending on the specific kit purchased.
Sąranka ir diegimas
The NOVSIGHT A500-N35 LED bulbs are designed for a plug-and-play installation, closely matching the size of standard halogen bulbs (HB4 9006). No additional harnesses are typically required.
- Paruošimas: Park your vehicle on a level surface, turn off the engine, and engage the parking brake. Disconnect the negative terminal of your vehicle's battery.
- Prieiga prie lemputės: Locate the headlight or fog lamp assembly. Depending on your vehicle model, you may need to remove certain components (e.g., air intake, battery, or fender liner) to gain access to the back of the bulb housing.
- Pašalinti seną lemputę: Disconnect the electrical connector from the existing halogen bulb. Then, unclip or twist to remove the old bulb from its housing.
- Įdiekite LED lemputę: Insert the NOVSIGHT A500-N35 LED bulb into the housing, ensuring it is seated correctly and securely. The 1:1 halogen size design ensures compatibility with most vehicle housings.
- Prijunkite elektros įrangą: Connect the electrical connector from your vehicle's wiring harness to the NOVSIGHT LED bulb. Ensure a secure connection.
- Bandymo funkcionalumas: Reconnect the vehicle's battery. Turn on your headlights/fog lights to verify that the new LED bulbs are functioning correctly. Check both low beam and high beam (if applicable) and ensure the beam pattern is correct.
- Galutinė asamblėja: Reinstall any components removed during step 2.
Svarbi pastaba: If you encounter any issues with fitment or functionality, or if you are new to automotive lighting installation, please contact NOVSIGHT customer service for assistance. They can provide installation videos and support.

1 pav.: Priekinė ir šoninė dalys view of the NOVSIGHT A500-N35 LED bulb, showing its compact design for easy installation.

Figure 2: Illustration of the all-in-one compact design of the NOVSIGHT LED bulb, emphasizing its 1:1 halogen size for broad vehicle compatibility and plug-and-play installation.
Naudojimo instrukcijos
Once installed, operating your NOVSIGHT A500-N35 LED headlights is similar to operating standard vehicle lights.
- Turn on your vehicle's headlights or fog lights using the standard controls.
- The A500-N35 bulbs provide a 6000K cool white light, offering enhanced visibility.
- The advanced beam pattern is designed to illuminate the road effectively without causing glare to oncoming traffic.

Figure 3: Comparison of road visibility at night, demonstrating the improved clarity and illumination provided by NOVSIGHT LED headlights compared to standard halogen lamps.

Figure 4: Driver's perspective view comparing the low beam and high beam performance of NOVSIGHT LED headlights versus halogen lamps, highlighting the enhanced brightness and coverage.
Priežiūra
NOVSIGHT A500-N35 LED bulbs are designed for long-term, maintenance-free operation, with a lifespan of up to 50,000 hours. Minimal maintenance is required.
- Valymas: Periodically clean the headlight lenses of your vehicle to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solutions.
- Patikra: Retkarčiais apžiūrėkite lemputes ir jungtis, ar nėra pažeidimų ar atsilaisvinusių laidų.
- Aušinimo sistema: The integrated AirCool intelligent frequency conversion heat dissipation and Airlux circulation fan-less cooling technology ensure optimal operating temperature. Ensure that the area around the bulb housing is not obstructed to allow for proper heat dissipation.

Figure 5: Diagram illustrating the advanced cooling system of the NOVSIGHT LED bulb, featuring intelligent frequency conversion heat dissipation and fan-less technology for extended lifespan.
Trikčių šalinimas
If you experience issues with your NOVSIGHT A500-N35 LED bulbs, refer to the following common problems and solutions:
| Problema | Galima priežastis | Sprendimas |
|---|---|---|
| Lemputė neužsidega. |
|
|
| Flickering or intermittent light. |
|
|
| Error message on dashboard. |
|
|
| Beam pattern is incorrect or scattered. |
|
|
If these troubleshooting steps do not resolve your issue, please contact NOVSIGHT customer support for further assistance.
Specifikacijos
| Funkcija | Detalė |
|---|---|
| Modelis | A500-N35 |
| Lemputės tipas | HB4 (9006) LED |
| Šviesos šaltinis | LED |
| Spalvos temperatūra | 6000K šaltai balta |
| Ryškumas | 7000 LM/Pair (3500 LM/Bulb) |
| Vattage | 40W/pora |
| ttage | 12 V |
| Gyvenimo trukmė | Iki 50,000 valandų |
| Atsparumo vandeniui įvertinimas | IP68 |
| Darbinė temperatūra | -40°C iki +80°C |
| Aušinimo sistema | AirCool Intelligent Frequency Conversion Heat Dissipation, Airlux Fan-less Technology |

6 pav. Iš arti view of the NOVSIGHT LED bulb, highlighting the high-quality TYANSHINE chip for superior brightness and stability.

Figure 7: Lux meter readings comparing the brightness of a standard halogen bulb (2207 LUX) against the NOVSIGHT LED headlight (3493 LUX), demonstrating significantly higher light output.
Garantija ir palaikymas
NOVSIGHT provides customer support for its products. If you have any questions regarding installation, operation, or troubleshooting, please contact NOVSIGHT customer service.
- Susisiekimas su palaikymo tarnyba: If you are unsure about the correct bulb size for your vehicle, or if you need assistance with installation, please contact NOVSIGHT customer service before or after purchase.
- Diegimo vaizdo įrašai: Upon request, NOVSIGHT customer service can provide installation videos to guide you through the process.
- Aptarnavimas visą parą: NOVSIGHT offers 24-hour support for any inquiries or issues you may have.
For the most up-to-date warranty information and contact details, please refer to the official NOVSIGHT websvetainėje arba pirkimo dokumentuose.