WOFI 6014.10.24.9000 Villa Pendant Lamp Vartotojo vadovas

1. Įvadas

Thank you for choosing the WOFI 6014.10.24.9000 Villa Pendant LampŠiame vadove pateikiama esminė informacija apie saugų naujo šviestuvo montavimą, naudojimą ir priežiūrą. Prieš pradėdami montavimą, atidžiai perskaitykite šias instrukcijas ir išsaugokite jas ateičiai.

Image 1: WOFI Villa Pendant Lamp (6014.10.24.9000 modelis)
This image shows the complete pendant lamp with its chrome-finished bar and multiple spherical, smoked glass shades, suspended from a rectangular ceiling plate.

2. Saugos informacija

ĮSPĖJIMAS: Elektros instaliacijos darbus turėtų atlikti tik kvalifikuotas elektrikas. Prieš montuodami, atlikdami techninę priežiūrą ar keisdami lemputę, visada atjunkite maitinimą nuo pagrindinio jungiklio.

• Įsitikinkite, kad tvirtinimo paviršius gali atlaikyti įrenginio svorį.
• Do not connect the fixture to a power source other than 230 Volts AC.
• Avoid touching bulbs with bare hands; use a clean cloth or gloves.
• Pakavimo medžiagas laikykite vaikams nepasiekiamoje vietoje.
• Šis gaminys skirtas naudoti tik patalpose.
• The fixture is rated Class 1 protection, meaning it must be earthed.

3. Pakuotės turinys

Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact your retailer for assistance.

• Pakabukas lamp fixture (main body with ceiling plate, suspension cables, and light bar)
• Glass shades (10 pieces)
• Light bulbs (10 pieces, included)
• Mounting hardware (screws, wall plugs, terminal block)
• Naudojimo instrukcija

4. Sąranka ir diegimas

Prieš pradėdami: Ensure the power supply to the installation area is switched off at the main circuit breaker. It is recommended to have two people for installation.

1. Paruoškite lubas: Mark the drilling points on the ceiling for the mounting bracket, ensuring they align with the fixture's ceiling plate.
2. Įdiekite montavimo laikiklį: Drill holes and insert wall plugs. Secure the mounting bracket to the ceiling using the provided screws.
3. Elektros jungtis: Connect the household electrical wires to the terminal block on the fixture. Ensure correct polarity (Live, Neutral, Earth). The fixture is Class 1 and requires an earth connection.
4. Pritvirtinkite lubų plokštę: Carefully lift the fixture and attach the ceiling plate to the mounting bracket, securing it with the provided screws.
5. Adjust Suspension Height: The suspension cables can be adjusted to your desired height. Follow the mechanism provided on the fixture to shorten or lengthen the cables.
6. Stiklinių užuolaidų montavimas: Carefully screw or attach each of the 10 glass shades onto the lamp holders on the light bar.
7. Įdėkite lemputes: Screw the included light bulbs into the lamp holders. Do not overtighten.

Image 2: Installation Dimensions
This diagram illustrates the dimensions of the pendant lamp, including the ceiling plate (346 mm wide), the overall length of the light bar (860 mm), and the maximum adjustable suspension height (1500 mm). The spherical shades have a diameter of 150 mm.

5. Naudojimo instrukcijos

Once installed, the WOFI Villa Pendant Lamp operates via a standard wall switch connected to its power supply.

• Įjungimas / išjungimas: Flip the wall switch to turn the lamp įjungti arba išjungti.
• Pritemdymas: Please note that this fixture has a non-adjustable intensity and is not dimmable. It will operate at full brightness when switched on.

6. Priežiūra

• Valymas: Prieš valydami visada atjunkite maitinimą. Naudokite minkštą, sausą arba šiek tiek sudrėkintą šluostę.amp cloth to wipe the fixture and glass shades. Do not use abrasive cleaners or solvents, as these can damage the finish.
• Lemputės keitimas:
  1. Ensure the power is off at the main circuit breaker.
  2. Allow bulbs to cool completely before touching.
  3. Atsargiai atsukite seną lemputę iš jos lizdo.
  4. Screw in a new bulb of the correct type and wattage (žr. specifikacijas).
  5. Neviršykite didžiausios galiostage nurodyta armatūrai.

7. Problemų sprendimas

If the problem persists after attempting these solutions, please consult a qualified electrician.

8. Specifikacijos

Image 3: Energy Label
This image displays the EU energy label, indicating an energy efficiency class of F for the product, with an energy consumption of 3 kWh/1000h. A QR code is present for more information, linking to the EPREL database.

9. Garantija ir palaikymas

For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.