Įvadas
This manual provides essential information for setting up, operating, and maintaining your HP EliteDisplay E273 27-inch LED-Lit Monitor. Please read these instructions carefully to ensure proper use and to maximize the performance and lifespan of your device. This monitor is designed for optimal viewing, productivity, and ergonomics, featuring a 3-sided micro-edge bezel and 4-way adjustability.
1. Sąranka
1.1 Monitoriaus išpakavimas
Atsargiai išimkite visas dalis iš pakuotės. Įsitikinkite, kad yra visi pridedami daiktai:
- HP EliteDisplay E273 27-inch LED-Backlit LCD Monitor
- Monitoriaus stovas (pagrindas ir pakyla)
- Maitinimo laidas
- VGA laidas
- „DisplayPort“ laidas
- USB 3.0 to USB 3.0 Type B Cable
1.2 Stovo tvirtinimas
- Padėkite monitorių ekranu žemyn ant minkšto, švaraus paviršiaus, kad nesusibraižytumėte.
- Attach the riser to the back of the monitor panel, ensuring it clicks securely into place.
- Attach the base to the riser and tighten the thumb screw at the bottom of the base.
1.3 Jungiamieji kabeliai
Prijunkite reikiamus laidus prie monitoriaus ir kompiuterio:
- Galia: Prijunkite maitinimo laidą prie monitoriaus maitinimo įvesties, o tada – prie įžeminto elektros lizdo.
- Vaizdo įrašas: Connect one end of the DisplayPort, HDMI, or VGA cable to the corresponding port on the monitor and the other end to your computer's video output port. Use only one video connection.
- USB: Connect the USB 3.0 Type B cable from the monitor's upstream USB port to an available USB 3.0 port on your computer to enable the monitor's USB hub functionality.
1.4 Pradinis įjungimas
Press the power button on the monitor. The monitor should display an image from your connected computer. If no image appears, ensure all cables are securely connected and the computer is powered on.
Vaizdas: priekis view of the HP EliteDisplay E273 27-inch monitor with its adjustable stand.
Vaizdo įrašas: 360 laipsnių view of the HP EliteDisplay E273 monitor, showcasing its design and adjustable stand features.
2. Monitoriaus valdymas
2.1 Ekrano reguliavimas
The HP EliteDisplay E273 offers versatile adjustments for ergonomic comfort:
- Aukščio reguliavimas: Gently push or pull the monitor panel up or down along the stand riser to achieve your desired viewaukštis.
- Pakreipimo reguliavimas: Hold the top and bottom edges of the monitor panel and gently tilt it forward or backward.
- Sukimosi reguliavimas: Pasukite monitoriaus skydelį ant pagrindo į kairę arba į dešinę.
- Sukties reguliavimas: The monitor can pivot from landscape to portrait orientation. Before pivoting, ensure the monitor is at its maximum height and tilted back to avoid contact with the desk surface.
2.2 Ekrano meniu (OSD)
Use the buttons on the monitor's bezel to access and navigate the OSD menu. This menu allows you to adjust various display settings such as brightness, contrast, color temperature, input source, and more.
- Norėdami atidaryti OSD, paspauskite meniu mygtuką.
- Naršymo mygtukais slinkite parinktis.
- Press the Select button to confirm a selection.
- Press the Exit button to close the OSD.
2.3 Įvesties pasirinkimas
If you have multiple devices connected to the monitor, you can switch between input sources using the OSD menu or a dedicated input selection button (if available) on the monitor's bezel.
3. Priežiūra
3.1 Monitoriaus valymas
To maintain the clarity and appearance of your monitor:
- Prieš valydami visada išjunkite monitorių ir atjunkite jį nuo elektros lizdo.
- Lengvai naudokite minkštą, nepūkuotą audinį dampnuplaukite vandeniu arba neabrazyviniu ekrano valikliu.
- Nepurkškite valiklio tiesiai ant ekrano. Pirmiausia užtepkite jį ant šluostės.
- Venkite naudoti stiprias chemines medžiagas, tirpiklius ar abrazyvines medžiagas, nes jos gali pažeisti ekraną arbaasing.
4. Problemų sprendimas
Jei kyla problemų dėl monitoriaus, žr. šiuos dažniausiai pasitaikančius sprendimus:
| Problema | Galimas sprendimas |
|---|---|
| Ekrane nėra vaizdo | Ensure the power cable is securely connected and the monitor is powered on. Verify the video cable is connected to both the monitor and the computer. Check if the correct input source is selected via the OSD menu. |
| Vaizdas blankus arba per ryškus | Adjust the brightness and contrast settings through the OSD menu. |
| Neryškus arba neryškus vaizdas | Ensure the display resolution on your computer is set to the monitor's native resolution (1920 x 1080). Check the video cable for secure connection and damage. |
| USB prievadai neveikia | Verify that the USB 3.0 Type B upstream cable is connected from the monitor to your computer. Ensure your computer's USB drivers are up to date. |
5. Specifikacijos
| Funkcija | Detalė |
|---|---|
| Prekės ženklas | HP |
| Modelio numeris | 1FH50A8#ABA |
| Modelio pavadinimas | E273 |
| Ekrano dydis | 27 colių |
| Ekrano tipas | LED-Backlit LCD, IPS Panel |
| Rezoliucija | 1920 x 1080 (Full HD 1080i) |
| Krašto santykis | 16:9 |
| Atnaujinimo dažnis | 60 Hz |
| Reagavimo laikas | 5 milisekundžių |
| Ryškumas | 250 cd/m² |
| Kontrasto santykis | 1000:1 |
| Viewing kampas | 178 laipsnių |
| Ryšys | DisplayPort, HDMI, USB 3.0 (2 ports), VGA |
| Matmenys (G x P x A) | 2 "D x 27.6" P x 20.6" A |
| Svoris | 15.5 svaro |
| Spalva | Juoda/Sidabrinė |
| Montavimo tipas | Sieninis laikiklis |
| Įtraukti komponentai | LED-backlit LCD monitor, VGA cable, DisplayPort cable, USB 3.0 to USB 3.0 type B cable |
6. Informacija apie garantiją
This HP EliteDisplay E273 monitor comes with a 3 metų ribota garantija. For detailed terms and conditions, please refer to the warranty documentation included with your product or visit the official HP support websvetainę.
7. Parama
For further assistance, technical support, or to download the latest drivers and software, please visit the official HP support websvetainė:
You may also find helpful resources and FAQs on the HP websvetainę.