„Philips BT9297/15 Series 9000“ barzdos kirpimo mašinėlės naudotojo vadovas

1. Įvadas

This manual provides essential information for the safe and effective use of your Philips BT9297/15 Series 9000 Beard Trimmer. Please read these instructions carefully before first use and retain them for future reference. This device is designed for trimming and styling facial hair.

2. Saugos informacija

• Always check the appliance before use. Do not use if damaged.
• Keep the appliance dry. Do not immerse in water while charging.
• This appliance is 100% washable. Ensure the appliance is unplugged from the power outlet before cleaning with water.
• Do not use the appliance with a damaged comb or blade, as this may cause injury.
• Prietaisą laikykite vaikams nepasiekiamoje vietoje.
• The laser guide is safe for eyes under normal use conditions. Avoid direct eye exposure to the laser beam.
• Naudokite tik su gaminiu pateiktą įkroviklį.

3. Produktas baigtasview

The Philips BT9297/15 Series 9000 Beard Trimmer is engineered for precise beard styling with advanced features.

1 paveikslas: Philips BT9297/15 Series 9000 Beard Trimmer. This image shows the overall design of the trimmer, highlighting its sleek appearance and digital display.

Pagrindinės funkcijos:

• Laser Guide Technology: Projects a red line to indicate the exact cutting path for symmetrical and precise trimming.
• 17 Adjustable Length Settings: From 0.4 mm to 7 mm, controlled via the Philips ZoomWheel.
• Dynamic Cutting System: Features an integrated HairLift comb that lifts hairs to the optimal cutting position for an even trim.
• Tikslus kirpimas: Equipped with a 32 mm main blade and a 10 mm detail trimmer for fine styling.
• Belaidis veikimas: Provides up to 80 minutes of cordless use after a 1-hour charge.
• 100% plaunamas: Sukurta lengvam valymui po tekančiu vandeniu.

2 paveikslas: Close-up of the trimmer head, showing the laser guide emitter. The laser projects a visible line to assist with precise trimming.

Įtraukti komponentai:

• Philips BT9297/15 Beard Trimmer
• 1 Lift and Trim Comb
• Detalių žoliapjovės priedas
• Sandėliavimo maišelis
• Įkrovimo kabelis

3 paveikslas: Product packaging for the Philips BT9297/15. This image illustrates the contents typically included in the box.

4. Sąranka

4.1 Prietaiso įkrovimas

1. Įsitikinkite, kad prietaisas yra išjungtas.
2. Insert the small plug of the charging cable into the socket at the bottom of the trimmer.
3. Įjunkite adapterį į sieninį lizdą.
4. The battery indicator on the display will show charging progress. A full charge takes approximately 1 hour and provides up to 80 minutes of cordless use.

4.2 Šukų pritvirtinimas / nuėmimas

• To attach the lift and trim comb, slide it onto the trimmer head until it clicks into place.
• To detach, gently pull the comb away from the trimmer head.

4 paveikslas: The Philips BT9297/15 trimmer with the lift and trim comb attached. This comb helps guide hairs for an even cut.

5. Naudojimo instrukcijos

5.1 Įjungimas / išjungimas

Press the power button once to turn the trimmer on. Press it again to turn it off.

5.2 Ilgio nustatymų reguliavimas

1. Ensure the lift and trim comb is attached.
2. Rotate the ZoomWheel to select your desired trimming length. The selected length (0.4 mm to 7 mm) will be displayed on the digital screen.

5 paveikslas: A hand adjusting the ZoomWheel on the trimmer. The digital display shows the selected length setting.

5.3 Using the Laser Guide

1. Activate the laser guide by pressing the dedicated laser button (if available, otherwise it activates automatically with the trimmer).
2. A red laser line will project onto your skin, indicating the precise cutting line.
3. Align the trimmer head with the desired line and move the trimmer against the direction of hair growth for an even trim.

6 paveikslas: A man using the Philips BT9297/15, demonstrating the laser guide projecting a red line on his cheek for precise beard shaping.

7 paveikslas: The trimmer in use, with the laser guide assisting in defining the beard line along the chin area.

5.4 Apipjaustymo būdai

• For an even trim, move the trimmer slowly and steadily against the direction of hair growth.
• Use light pressure. Do not press the trimmer too hard against your skin.
• For best results, ensure your beard is dry before trimming.

8 paveikslas: A man trimming his beard with the Philips BT9297/15, demonstrating a typical trimming motion.

5.5 Detalių apipjaustytuvo naudojimas

The 10 mm detail trimmer is ideal for precise lines, edges, and small areas. To use it, remove the main comb and attach the detail trimmer head (if it's a separate attachment) or flip the head to expose the detail trimmer.

9 paveikslas: Iš arti view of the detail trimmer head. This smaller blade is designed for intricate styling and sharp lines.

10 paveikslas: A man using the detail trimmer to refine the edges of his beard, showcasing its precision capabilities.

6. Priežiūra ir valymas

Reguliarus valymas užtikrina optimalų našumą ir pailgina žoliapjovės tarnavimo laiką.

6.1 Žoliapjovės valymas

1. Išjunkite prietaisą ir ištraukite kištuką iš elektros lizdo.
2. Nuimkite šukos priedą.
3. Rinse the trimmer head and comb under running tap water. The appliance is 100% washable.
4. Nukratykite vandens perteklių ir leiskite visoms dalims visiškai išdžiūti ore prieš surinkdami arba padėdami.
5. Nenaudokite abrazyvinių valymo priemonių ar stiprių cheminių medžiagų.

6.2 Peilių priežiūra

• Ašmenys yra savaime galandami ir jų nereikia tepti alyva.
• Handle the blades with care. If the blades become damaged, they should be replaced.

7. Problemų sprendimas

7.1 Trimmer Does Not Turn On

• Įsitikinkite, kad akumuliatorius įkrautas. Prijunkite žoliapjovę prie įkroviklio ir leiskite jai įkrauti bent 15 minučių, prieš bandydami ją vėl įjungti.
• Patikrinkite, ar maitinimo mygtukas paspaustas tvirtai.

7.2 Poor Trimming Performance

• Clean the trimmer head and comb thoroughly. Hair buildup can affect performance.
• Ensure the comb attachment is correctly secured.
• The battery might be low. Charge the trimmer fully.
• If the blades are dull or damaged, they may need replacement.

7.3 Laser Guide Not Visible

• Įsitikinkite, kad žoliapjovė įjungta.
• Check for any obstructions on the laser emitter. Clean if necessary.
• The laser may be less visible in brightly lit environments. Try using it in a moderately lit area.

8. Specifikacijos

9. Garantija ir palaikymas

Philips offers a manufacturer's warranty for this product. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.

For product support, spare parts, or further assistance, please visit the official Philips website or contact Philips customer service in your region. Contact information can typically be found in the product packaging or on the Philips websvetainę.