Philips 800144 Downlight Surface Mounted LED Fixture User Manual

Produktas baigtasview

The Philips 800144 LED Surface Mounted Fixture is designed to convert existing ceiling-mounted fixtures or standard recessed cans into an energy-efficient LED light source. This dimmable fixture provides a soft white light, suitable for various indoor and outdoor applications.

Image: Philips 800144 Downlight Surface Mounted LED Fixture. This image shows the compact design of the LED fixture, ready for installation.

Pagrindinės funkcijos:

• Energijos efektyvumas: 13-watt LED, equivalent to a 75-watt standard incandescent bulb.
• Ilgas tarnavimo laikas: Rated for 36,000 hours (based on 3 hours/day usage).
• Universalus montavimas: Can be mounted to a 4-inch junction box or in a 5/6-inch recessed housing.
• Švelni balta šviesa: Provides a comfortable ambiance for general room lighting.
• Pritemdomas: Compatible with dimmer switches for adjustable brightness.
• Wet Location Suitable: Ideal for bathrooms, showers, or covered outdoor areas.

Sąranka ir diegimas

This fixture is designed for surface mounting and can be installed directly onto a 4-inch junction box or within a 5/6-inch recessed housing. No complex assembly is required for the fixture itself.

Diegimo žingsniai:

1. Pirmiausia sauga: Ensure power to the installation area is turned off at the circuit breaker before beginning.
2. Paruoškite montavimo paviršių: For junction box installation, ensure the box is securely fastened. For recessed housing, ensure the housing is properly installed.
3. Prijunkite laidus: Connect the fixture's wires to the corresponding household wires (live, neutral, ground) according to local electrical codes. Use appropriate wire connectors.
4. Tvirtinimo elementas: Secure the fixture to the junction box or recessed housing using the provided hardware. Ensure a snug fit against the ceiling surface.
5. Atkurti maitinimą: Kai šviestuvas bus tvirtai pritvirtintas ir prijungtas, atkurkite elektros tiekimą automatiniu jungikliu.
6. Bandymo funkcionalumas: Įjunkite šviesos jungiklį, kad patikrintumėte tinkamą veikimą.

Note: Installation should be performed by a qualified electrician if you are unsure about electrical wiring procedures.

Naudojimo instrukcijos

The Philips 800144 LED fixture operates on a standard 120-volt electrical supply. It provides 1100 lumens of soft white LED light. The fixture is dimmable, allowing you to adjust the light output using a compatible dimmer switch.

Šviesos spalvos temperatūra:

Understanding color temperature helps in choosing the right lighting for your space. While this fixture provides a soft white light, the following chart illustrates various color temperatures and their typical ambiances.

Image: Color Temperature Chart. This chart displays different light color temperatures ranging from warm amber (2000-2200K) to cool daylight deluxe (6500K), illustrating the ambiance each creates. The Philips 800144 provides a soft white light, typically around 2700K-3000K.

Pritemdomos funkcijos:

To utilize the dimming feature, ensure the fixture is connected to a compatible dimmer switch. Refer to your dimmer switch's instructions for proper operation and compatibility.

Priežiūra

The Philips 800144 LED fixture is designed for long-term, maintenance-free operation with a lifespan of approximately 36,000 hours. As an LED fixture, it does not require bulb replacement.

Valymas:

• Prieš valydami įsitikinkite, kad įrenginio maitinimas yra išjungtas grandinės pertraukikliu.
• Nuvalykite įrenginio išorę minkšta,amp audinys.
• Do not use abrasive cleaners or solvents, as these can damage the finish or electrical components.
• Prieš atkurdami elektros tiekimą, įsitikinkite, kad armatūra yra visiškai sausa.

Trikčių šalinimas

If you encounter issues with your Philips 800144 LED fixture, refer to the following common troubleshooting steps:

• Šviesa neįsijungia:
  • Patikrinkite grandinės pertraukiklį, kad įsitikintumėte, jog į įrenginį tiekiama elektra.
  • Verify that the light switch is in the "on" position.
  • Inspect wiring connections for looseness or damage (ensure power is off before inspection).
• Šviesos mirgėjimas:
  • Ensure the fixture is compatible with your dimmer switch, if one is installed. Some LED fixtures require specific types of dimmers.
  • Patikrinkite, ar nėra laisvų laidų jungčių.
  • Flickering can sometimes indicate an aging power supply within the LED fixture, especially after several years of use.
• Light is Dim or Uneven:
  • If using a dimmer, ensure it is set to the desired brightness level.
  • Verify that the fixture is receiving the correct voltage (120 voltų).

If these steps do not resolve the issue, contact Philips customer support for further assistance.

Specifikacijos

Informacija apie garantiją

The Philips 800144 Downlight Surface Mounted LED Fixture comes with a manufacturer's warranty covering 2 metai dalims ir darbui nuo pirkimo datos. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.

For warranty service or questions, please contact Philips customer support.

Pagalba klientams

For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Philips customer service. Visit the official Philips websvetainėje, kurioje rasite kontaktinę informaciją ir pagalbos išteklius.

Gamintojas: „Philips“ apšvietimas

Prekinis ženklas: Philips