SEIKO SQ767W Digital Alarm Clock User Manual

1. Įvadas

Ačiū, kad pirkoteasing the SEIKO SQ767W Digital Alarm Clock. This compact and versatile clock features a digital display, dual alarms, a calendar, and displays both temperature and humidity. It is designed for convenience on your bedside table or desktop. This manual provides essential information for setup, operation, and maintenance to ensure optimal performance.

1 pav.: priekis view of the SEIKO SQ767W Digital Alarm Clock.

2. Produkto ypatybės

• Dvigubi aliarmai: Set two independent alarm times.
• Radio Wave Correction: Automatically corrects time by receiving standard radio waves (40 kHz/60 kHz automatic selection). Includes a radio wave off function.
• Skaitmeninis ekranas: Clear display of time, date, temperature, and humidity.
• Snaudimo funkcija: Temporarily pauses the alarm.
• Šviesos funkcija: Illuminates the display for visibility in low light.
• Alarm Monitor: Allows checking the alarm sound.
• Alarm Auto Stop: Alarm automatically stops after 5 minutes.
• Pilnai automatinis kalendorius: Displays the correct date automatically.
• Temperatūros / drėgmės rodymas: Provides current room temperature and humidity readings.

3. Sąranka

3.1 Akumuliatoriaus įdėjimas

1. Atidarykite akumuliatoriaus skyriaus dangtelį, esantį laikrodžio gale.
2. Insert two (2) AA manganese batteries, ensuring correct polarity (+/-).
3. Saugiai uždarykite akumuliatoriaus skyriaus dangtelį.

The clock requires 2 AA batteries, which are included with the product.

3.2 Initial Power On and Radio Wave Reception

Upon battery installation, the clock will attempt to receive radio waves to set the time automatically. For best reception:

• Padėkite laikrodį prie lango.
• Avoid locations with potential radio interference, such as:
  • Inside buildings, basements, or areas with thick walls.
  • Netoli didelio tūriotage lines, TV towers, or train rails.
  • Close to electronic appliances (TVs, refrigerators, air conditioners, computers, etc.).
  • In vehicles (automotive, train, airplane).
  • Near metal furniture like steel desks.

If radio waves are not received, the clock will operate with quartz accuracy. Reception may vary depending on environmental conditions.

Figure 2: Radio wave coverage map for time synchronization.

4. Naudojimo instrukcijos

The control buttons are located on the back of the clock. Refer to Figure 3 for button identification.

3 pav.: Nugara view su valdymo mygtukais.

4.1 Laiko ir datos nustatymas

• Automatic Setting (Radio Wave): The clock attempts to set the time and date automatically via radio wave reception. Ensure the clock is placed in an optimal reception area.
• Rankinis nustatymas: If radio wave reception is not possible or desired, you can manually set the time and date using the '時刻/日付合わせ' (Time/Date Adjustment) button and other relevant controls on the back. Consult the detailed instructions for specific button sequences.

4.2 Žadintuvų nustatymas (1 ir 2 žadintuvai)

Laikrodis turi du nepriklausomus žadintuvus.

1. Use the 'アラーム時刻合わせ' (Alarm Time Adjustment) button to select Alarm 1 or Alarm 2.
2. Adjust the desired alarm time using the appropriate adjustment buttons.
3. Toggle the 'アラーム1 ON/OFF' or 'アラーム2 ON/OFF' switch to activate or deactivate each alarm.

4.3 Snooze and Light Function

Press the large button on top of the clock to activate the snooze function when an alarm sounds. This button also illuminates the display temporarily when pressed outside of an alarm event.

4.4 Temperatūros ir drėgmės rodymas

The clock continuously displays the current room temperature and humidity on its screen. No special action is required to view šie rodmenys.

Figure 4: Close-up of the digital display.

5. Priežiūra

5.1 Valymas

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing arba ekranas.

5.2 Akumuliatoriaus keitimas

Replace batteries when the display dims or the clock's functions become unreliable. Always replace both batteries at the same time with new AA manganese batteries. Dispose of used batteries according to local regulations.

6. Problemų sprendimas

• Clock not displaying time/functions: Patikrinkite baterijų įdėjimą ir įsitikinkite, kad jos nėra išsikrovusios.
• Laikas neteisingas: Ensure the clock is in an optimal location for radio wave reception. If automatic correction fails, manually set the time.
• Signalizacija neskamba: Verify that the alarm is set to 'ON' and the alarm time is correctly configured.
• Ekranas blankus: Pakeiskite baterijas.
• Radio wave reception issues: Relocate the clock away from electronic devices, metal objects, or large structures that may interfere with signals.

7. Specifikacijos

8. Garantija ir palaikymas

For warranty information or technical support, please refer to the documentation included with your purchase or contact SEIKO customer service. Keep your purchase receipt as proof of purchase.