RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produktas baigtasview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Pagrindinės funkcijos:

• Galia: 39-watt LED
• Spalvos temperatūra: 5100K šaltai balta
• Gyvenimo trukmė: 100,000 hours based on LM-80 tests
• Šviesos diodai: Three multi-chip 13-watt high-performance LEDs
• Optika: NEMA type 7H x 6V with Air-flow technology heatsink
• Atšvaitas: Semi-specular anodized aluminum
• Tarpinės: Aukštos temperatūros silikonas
• Baigti: Bronze chip and fade-resistant polyester powder coat
• ttage: 120-volt to 277-volt operation

2. Saugos informacija

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Elektros sauga: Montavimą turi atlikti kvalifikuotas elektrikas, laikydamasis visų nacionalinių ir vietinių elektros kodeksų. Prieš montuodami ar atlikdami techninę priežiūrą, įsitikinkite, kad maitinimas yra atjungtas nuo grandinės pertraukiklio.
• Įžeminimas: The fixture must be properly grounded to prevent potential electric shock.
• Montavimas: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Darbinė temperatūra: Nenaudokite įrenginio už nurodyto temperatūros diapazono ribų.
• Šviesos diodai: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Montavimas

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Reikalingi įrankiai:

• Atsuktuvas (Phillips ir plokščia galvutė)
• Įrankių lagaminai
• Replės
• Drill (if mounting surface requires pilot holes)
• Reguliuojamas veržliaraktis

Montavimo parinktys:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

2 pav. Pvzample of a Slipfitter Mount (optional accessory)

Diegimo žingsniai:

1. Atjunkite maitinimą: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage testeris.
2. Paruoškite montavimo paviršių: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Laidų jungtys:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Tvirtinimo elementas: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Koreguoti tikslą: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Atkurti maitinimą: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Operacija

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standartinis veikimas:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

3 pav. Pvzample of a Photocell (optional accessory)

5. Priežiūra

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Valymas:

• Išorė: Periodiškai valykite įrenginio išorę minkšta, d šluosteamp šluoste pašalinkite nešvarumus, dulkes ir šiukšles. Nenaudokite abrazyvinių valiklių ar tirpiklių.
• Objektyvas: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Patikra:

• Reguliariai tikrinkite armatūrą, ar nėra pažeidimų, atsilaisvinusių jungčių ar susidėvėjimo požymių.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Problemų sprendimas

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifikacijos

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garantija ir palaikymas

Gamintojo garantija:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1 metų gamintojo garantija nuo įsigijimo datos. Ši garantija taikoma medžiagų ir gamybos defektams, atsiradusiems įprasto naudojimo ir priežiūros sąlygomis.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Klientų aptarnavimas:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting websvetainė, kurioje pateikiami naujausi kontaktiniai duomenys.