Yosemite Home Decor AL000

Yosemite Home Decor AL000 11.5-Inch Low Voltage Address Light Instruction Manual

Model: AL000 | Brand: Yosemite Home Decor

1. Saugos informacija

ĮSPĖJIMAS: Šis gaminys gali paveikti jus su cheminėmis medžiagomis, įskaitant šviną, kuris Kalifornijos valstijoje, kaip žinoma, sukelia vėžį ir apsigimimus arba kitą žalą reprodukcijai. Norėdami gauti daugiau informacijos, eikite į www.P65Warnings.ca.gov.

Always ensure power is disconnected before installation or maintenance. This fixture is UL-rated for wet locations, ensuring safe outdoor use.

2. Pakuotės turinys

Prieš pradėdami montavimą, patikrinkite, ar yra visi komponentai.

  • 1x Address Light Fixture (White Frame with Black Numbers)
  • 2x Mini-wedge base 3-watt 14-volt light bulbs
  • 3x Sets of plastic numbers (0-9)
  • Montavimo įranga (varžtai ir inkarai)
  • Instrukcijų vadovas
Yosemite Home Decor AL000 Address Light Fixture

Image 1: Yosemite Home Decor AL000 11.5-Inch Low Voltage Address Light Fixture.

3. Sąranka

3.1 Applying Address Numbers

The address light comes with three sets of plastic numbers (0-9) for customization. Carefully select the numbers corresponding to your address.

  1. Clean the white surface of the address light where the numbers will be applied.
  2. Position the plastic numbers on the white surface to ensure correct alignment and spacing. It is recommended to pre-stage the numbers and mark their positions before applying adhesive.
  3. Apply a small line of adhesive (e.g., super-glue, not included) along the back of each number. Avoid saturating the numbers with glue, as excess adhesive may squeeze out and damage the plastic surface.
  4. Carefully place each number onto its marked position. The adhesive sets quickly, so precise placement is crucial as repositioning may not be possible without damage.
Address light with numbers 2020 applied

2 pav.: pvz.ample of applied address numbers (2020) on the light fixture.

Close-up of applied numbers 2020 on address light

3 paveikslėlis: Stambus planas view of the applied address numbers, showing clarity and placement.

3.2 Armatūros montavimas

The fixture is designed for wall mounting. Ensure the mounting surface is stable and can support the weight of the light.

  1. Choose a suitable location on the exterior of your home where the address light will be clearly visible.
  2. Use the provided mounting hardware (screws and anchors) to securely attach the fixture to the wall.
  3. Prijunkite žemą tūrįtage wires (14-volt) to your existing low voltage lighting system. Ensure all connections are secure and weatherproof.
Address light installed on a house wall

Image 4: The address light fixture mounted on an exterior wall of a house.

Video 1: This video demonstrates the process of applying numbers to a solar address sign and its waterproof design. It also shows the sign illuminating at night.

4. Naudojimo instrukcijos

The Yosemite Home Decor AL000 is a low voltage address light designed for continuous illumination.

  • Once properly installed and connected to a 14-volt low voltage power source, the light bulbs will illuminate the address numbers.
  • The fixture includes two mini-wedge base 3-watt 14-volt light bulbs.
  • There are no user-adjustable settings for light color or brightness on this specific model.

5. Priežiūra

  • Valymas: Periodically clean the white surface and numbers with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners that could scratch the surface or damage the numbers.
  • Lemputės keitimas: If a bulb burns out, disconnect power to the fixture before carefully replacing the mini-wedge base 3-watt 14-volt light bulb.
  • Patikra: Regularly inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

6. Problemų sprendimas

ProblemaGalima priežastisSprendimas
Šviesa nešviečia.No power to the fixture, faulty bulb, or loose wiring connection.Patikrinkite žemą tūrįtage power supply. Ensure bulbs are correctly seated and functional. Verify all wiring connections are secure.
Numbers are peeling or discolored.Improper adhesive application or prolonged exposure to harsh weather conditions.Reapply numbers with appropriate outdoor-grade adhesive. Consider using a UV-resistant clear coat over the numbers if discoloration is a recurring issue due to sun exposure.
Fixture appears yellowed or brittle.Prolonged exposure to intense sunlight and heat (common in desert climates).While the plastic is durable, extreme conditions can cause degradation over many years. Regular cleaning and inspection can help prolong its life. Replacement may be necessary after extended periods.

7. Specifikacijos

Product dimensions of the address light

Image 5: Product dimensions: 11.62 inches width, 5.25 inches height.

  • Prekinis ženklas: Yosemite Home Decor
  • Modelio pavadinimas: AL000
  • Gaminio matmenys: 2 colio ilgio x 11.5 colių pločio x 5.25 colio aukščio
  • Spalva: White Frame With Black Numbers
  • Medžiaga: Plastikiniai
  • Maitinimo šaltinis: Corded Electric (Low Voltage)
  • ttage: 14 voltų
  • Vattage: 3 vatų (vienai lemputei)
  • Šviesos šaltinių skaičius: 2
  • Šviesos šaltinio tipas: Incandescent (Mini-wedge base)
  • Ryškumas: 150 liumenų
  • Efektyvumas: 50 liumenų vienam vatui
  • Diegimo tipas: Sieninis laikiklis
  • Naudojimas viduje / lauke: Lauke
  • Atsparumo vandeniui lygis: Water Resistant (UL-rated for wet locations)
  • Prekės svoris: 13.4 uncijos (0.84 svaro)
  • UPC: 845805001100

8. Garantija ir palaikymas

Šis produktas tiekiamas su a 1 metų ribota garantija covering parts only.

For technical support, troubleshooting assistance, or warranty claims, please contact Yosemite Home Decor customer service. Refer to the product packaging or the official Yosemite Home Decor websvetainė, kurioje pateikiama naujausia kontaktinė informacija.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.