Lotus Ring Sizer User Guide

Lotus -LOGO

Lotus Ring Sizer

Lotus-Ring-Sizer-PRODUCT

Ring Size Finder Overview

Use three measuring techniques—the Paper Test, the String Test, or the Ring Test—to find your ring size. For best results, print the PDF at 100% (actual size) and double-check your measurements if possible.

Specifications

Specification Details
Product Type Ring Size Measuring Tool
Brand Lotus
Purpose Measures finger size for selecting the correct ring size
Measurement Method Adjustable paper/strip-style sizer
Measurement Unit Millimetres (mm)
How It Works Wrap around the finger and align the end with the size marking
Fit Snug but comfortable
Suitable For Ring sizing before purchasing or wearing a ring
Measurement Accuracy Best results when measured carefully and checked twice
Recommended Finger Finger on which the ring will be worn
Material Paper/printed sizing strip for the printable Lotus version
Use Home jewellery sizing
Additional Method Existing-ring comparison can also be used

INSTRUCTIONS

Ring Size Finder

  • Choose from three measuring techniques to help you find your size.
  • For accuracy, please print this PDF at 100% (actual size).
The Paper Test
  1. Print and carefully cut out our paper ring sizer.
  2. Cut along the “Cut Slit” line to make a slit.
  3. Slip the pointed end of the paper ring sizer into the slit.
  4. Place the paper ring sizer over the finger you want to measure.
  5. Gently pull the pointed end of the paper ring sizer to a snug-but-comfortable fit.
  6. Note the number that lines up with the slit-this is your ring size.
  7. Double-check for accuracy. If possible, have someone help you measure.

Lotus-Ring-Sizer-FIG- (1)

The String Test

  1. Cut a small piece of non-stretchable string, thread, floss or ribbon.
  2. Wrap it snugly (but comfortably) around the base of the finger you want to measure.
  3. With a marker or pen, carefully mark the spot where the string overlaps.
  4. Lay the string flat. Use a ruler to measure the length between your marks (in millimeters) that number by 3.14 to get the diameter.
  5. Use our ring size chart to match the diameter result (in millimeters) with its corresponding ring size.
  6. Double-check for accuracy. If possible, have someone help you measure.

The Ring Test

  1. Print out our ring size circle chart.
  2. Place your existing ring on top of each circle until you find a perfect match.
    The match should fit the inside of the ring. Double-check for accuracy.

Troubleshooting

  • Inaccurate sizing: Double-check your measurement. If possible, have someone help you measure.
  • Paper test fit issues: Ensure you pull to a snug-but-comfortable fit before reading the aligned number.
  • String test errors: Use non-stretchable material and measure the distance between your marks (in mm) before dividing by 3.14.
  • Ring test mismatch: Confirm the chart circle match fits the inside of your existing ring.

Documents / Resources

PDF thumbnailRing Sizer
User Guide · ring sizer, guide, Ring Sizer, Ring

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.