LOCKTON ELEV64 WI-FI BRIDGE – G2 Gateway Instructions

Optional gateway set up – For Remote WiFi Controlling

The ELEV64 in it’s primary condition is controlled by Bluetooth requiring the user to be within proximity of the bound locks to Change Passcodes, Add Fingerprints , Review audit trails & Create Temporary Passkeys etc. To Manage these lock functions remotely anywhere, the Art. Id: G2- GATE can be purchased separately.

GATEWAY G2

Model : G2
Dimensions : 70mm x 70mm x 26mm
Network : Wi-Fi 2.4G
IEEE standard : 802.11 b/g/n
Power interface :  Type-C USB
Power input : 5V/500mA

Light Status

Instruction

1. Open the APP
   
2. Touch the “ ” icon on the top left of the screen
   
3. Select [Gateway]
4. Select G2
   
5. Plug in the Gateway and  power it on
   
6. While the light is flashing in red and blue, press”+” sign
   
7. Add Gateway
   
8. Select the network and input your Wi-Fi password
   

Documents / Resources

LOCKTON ELEV64 WI-FI BRIDGE - G2 Gateway [pdf] Instructions ELEV64 WI-FI BRIDGE - G2 Gateway

References

• User Manual