Laserliner - ໂລໂກ້Condense Spot XP
ຄູ່​ມື​ຜູ້​ໃຊ້Laserliner Condense Spot XPLaserliner Condense Spot XP 2

Laserliner Condense Spot XP - icon 2Read the operating instructions and the enclosed brochure „Guarantee and additional notices“ completely. Follow the instructions they contain. Safely keep these documents for future reference.

ຟັງຊັນ/ແອັບພລິເຄຊັນ

The CondenseSpot is an infrared temperature measuring instrument with an integrated hygrometer that permits non-contact temperature measurements on surfaces as well as the measurement of relative humidity and ambient temperature. The instrument measures how much electromagnetic energy is emitted in the infrared wavelength range and uses this information to calculate surface temperature. During this process, two additional integrated sensors detect relative humidity and ambient temperature. The dew point is also calculated.

Laserliner Condense Spot XP - figure 1Laserliner Condense Spot XP 3

1 low battery charge 6 min/max and average measurement values
2 stability progress bar for relative
humidity measurement
7 dew point temperature (D Temp) and ambient temperature  (A Temp) in °C or °F
3 laser beam switched on, temperature measurement (infrared) 8 condense water indicator
4 measurements in °C or °F 9 last measurement value will be displayed brie y (7s)
5 relative humidity in % 10 replace battery

Laserliner Condense Spot XP 4Laserliner Condense Spot XP 5

Laser: The laser is a targeting aid to sight the location for the infrared measurement. Only the surface‘s temperature is measured. Laserliner Condense Spot XP 6

7. Displaying Min/Max/Avg, Ambient temperature, Dew point temperatureLaserliner Condense Spot XP 7

8. Dew point temperature is the temperature at which current air conditions would produce condensation. The CondenseSpot calculates the dew point temperature from ambient temperature, relative humidity, and ambient atmospheric pressure. In combination with the infrared thermometer, thermal bridges are easily detected. If the temperature of the measured location drops below the dew point, condensation (water) will form on the surface.Laserliner Condense Spot XP 8

9. ຄວາມຊື້ນສໍາພັດ
The relative humidity is indicated in relation to the maximum possible humidity (100 %) at which air forms water vapor. The ability of air to hold water is temperature-dependent. Thus humidity is the volume of water vapor in the air. The range for humidity is 0 … 100%. 100% = saturation point.
Under these conditions for temperature and atmospheric pressure, air cannot absorb any more water.Laserliner Condense Spot XP 9

When temperature fluctuations (± 1 °C) and/or changes to relative humidity (± 1%) are rapid, the sensor must adapt itself to the new conditions. An hourglass with a progress bar is displayed during this stabilization process.
During this process, displayed values are only approximations. Only after these symbols have been switched off is a stable value presented which represents maximum accuracy.

10. Setting the emission coef cientLaserliner Condense Spot XP 10

A built-in sensor head detects the material/surface-specific infrared rays emitted by every object. The level of these emissions is determined by the material‘s emission coefficient (0.01 to 0.99). This instrument is preset to an emission coefficient of 0.95, which is applicable to most organic materials as well as plastics,  ceramics, wood, rubber, and stone. For details of those materials with a different emission coefficient, please refer to the table.

ຄ່າສໍາປະສິດການປ່ອຍອາຍພິດທີ່ບໍ່ຮູ້ຈັກ:
Apply masking tape or black matt paint to the surface of the area whose temperature you wish to measure. Wait until the tape/paint has heated up.
The temperature of the surface can then be measured with an emission coefficient of 0.95.

11. Emission coef cient tables
ບໍ່ໂລຫະ

Asbestos 0.93 ປູນຂາວ 0.98
Asphalt 0.95 Marble
Black, dull finish Greyish, polished
0.94
0.93
ດິນ​ພູ​ເຂົາ​ໄຟ 0.70
ດິນຈີ່, ສີແດງ 0.93
ຄາໂບຣຸນດັມ 0.90 Masonry 0.93
ເຄື່ອງປັ້ນດິນເຜົາ 0.95 ທາສີ
ສີດໍາ, matt
Heat-resistant White
0.96-0.98 0.92
0.85 -0.95
ຈີນ
Brilliant white With glaze
0.7 - 0.75 0.92
ດິນເຜົາ 0.95 Paper
ທຸກສີສັນ
0.95​, 0.97
Coal Non-oxidised 0.8​, 0.9
ພາດສະຕິກ
Translucent PE, P, PVC
0.95
0.94
Concrete, plaster, mortar 0.93
ຝ້າຍ 0.77 ປູກຢາງພາລາ
Hard
ອ່ອນ, ສີເທົາ
0.94-0.95 0.89
ເຄື່ອງປັ້ນດິນເຜົາ, ມັດ 0.93
Fabric 0.95
ແກ້ວ 0.85 -0.94 ແກ້ວ Quartz 0.93
Graphite 0.7 -0.8 ຫິມະ 0.80
ແກນ 0.95 ດິນ 0.9 -0.98
ຫີນກາວ 0.8​, 0.95 Tar 0.79 -0.84
Heat sink Black, anodized 0.98 ເຈ້ຍ Tar 0.91 -0.93
ສີຫມໍ້ແປງ 0.94
ຜິວຫນັງຂອງມະນຸດ 0.98 ຮູບວໍເປເປີ, ສີອ່ອນ 0.88​, 0.90
ກ້ອນ
ຈະແຈ້ງ
ມີອາກາດຫນາວຢ່າງຮຸນແຮງ
0.97
0.98
ນ້ໍາ 0.93
ໄມ້
ບໍ່ໄດ້ຮັບການປິ່ນປົວ
Beech, ວາງແຜນ
0.8 0.95 0.94
ໝາກນາວ 0.3 -0.4
Lime maim brick 0.95

ໂລຫະ

Alloy A3003 Oxidised
ຫຍາບຄາຍ
0.3
0.1 - 03
ທາດເຫຼັກ, forged Matt 0.9
ເປັນຜູ້ນໍາພາ
rough
Oxidised
0.4
0.2 - 0.6
Aluminium Oxidised
Polished
0.2 - 0.4
0.04 - 0.06
Molybdenum Oxidised 0.2 - 0.6
ທອງເຫລືອງ
Polished
Oxidised
0.3
0.5
Nickel Oxidised 0.2 - 0.6
Platinum ດຳ 0.9
ທອງແດງ
Oxidised
Elect. terminal strips
0.4 - 0.8 0.6 Steel
Cold rolled Ground plate
ແຜ່ນຂັດ
ໂລຫະປະສົມ (8% nickel,
18% chromium) Galvanised Oxidised
Heavily oxidised
Freshly rolled Rough, flat surface
Rusty, red
Sheet, nickel-plated Sheet, rolled
0.7 - 0.9 0.4 - 0.6 0.1
0.35
0.28
0.80
0.88
0.24
0.95-0.98 0.69
0.11
0.56
Haynes Metal alloy 0.3 - 0.8
Inconel
Oxidised
Sandblasted Electropolished
0.7 - 0.95 0.3 - 0.6 0.15
ທາດເຫຼັກ
Oxidised
ມີ rust
With red rust
0.5 - 0.9 0.5 - 0.7 0.61 - 0.85
ທາດເຫຼັກ, ຫລໍ່
Oxidised
Non-oxidised
ມະຫາຊົນ molten
0.6 - 0.95 0.2
02 - 03
Zinc Oxidised 0.1

ຂໍ້ມູນດ້ານວິຊາການ

Technical revisions reserved. 08.13

Measured quantities °C (°F) infrared temperature measurement, %rH relative humidity, °C (°F) ambient temperature measurement
Infrared measurement range -40°C … 350°C (-40°F … 662°F)
ຂອບເຂດການວັດແທກອຸນຫະພູມສະພາບແວດລ້ອມ -10 °C … 60 °C (14 °F … 140 °F)
Relative humidity measurement range 20 % … 90 % rH
Dew point indicator -20 C … 60 C
ຄວາມຖືກຕ້ອງຂອງອິນຟາເລດ t 1 °C (-10 °C … 60 °C); t 1.5 °C (< 10 °C and > 60 °C) or t 1.5 % whichever value is greater
Ambient temperature accuracy t 2 °C
Relative humidity accuracy t 3%
Infrared resolution 0.1 ° C
Relative humidity resolution 1%
Dew point resolution 1 ° C
ຄ່າສໍາປະສິດການປ່ອຍອາຍພິດ Adjustable, 0.10 … 0.99
ອຸນຫະພູມປະຕິບັດການ 0 ° C ... 40 ° C
ອຸນຫະພູມການເກັບຮັກສາ -20 C … 70 C
Optics 8:1 (distance: measured spot)
ໄລຍະຍາວຂອງເລເຊີ 650 nm
ປະເພດເລເຊີ Class 2, < 1 mW
ການສະຫນອງພະລັງງານ Type 9 V E block battery

General safety instructions.
Attention: Do not look directly into the laser beam! The laser may not get into the hands of children! Do not point this device unnecessarily toward persons.Laserliner Condense Spot XP - warning

ຄໍາແນະນໍາແລະການກໍາຈັດຂອງ EU
Laserliner Condense Spot XP - ce
ອຸປະກອນນີ້ປະຕິບັດຕາມມາດຕະຖານທີ່ຈໍາເປັນທັງຫມົດສໍາລັບການເຄື່ອນຍ້າຍສິນຄ້າໂດຍບໍ່ເສຍຄ່າພາຍໃນ EU.
ຜະລິດຕະພັນນີ້ແມ່ນອຸປະກອນໄຟຟ້າແລະຕ້ອງໄດ້ຮັບການເກັບກໍາແຍກຕ່າງຫາກສໍາລັບການກໍາຈັດຕາມຄໍາສັ່ງຂອງເອີຣົບກ່ຽວກັບສິ່ງເສດເຫຼືອໄຟຟ້າແລະອຸປະກອນເອເລັກໂຕຣນິກ.
ແຈ້ງ​ການ​ຄວາມ​ປອດ​ໄພ​ແລະ​ການ​ເພີ່ມ​ເຕີມ​ໄດ້​ທີ່​: www.laserliner.com/info
CondenseSpotLaserliner Condense Spot XP - CondenseSpot

Laserliner Condense Spot XP - iconການບໍລິການ
Umarex GmbH & Co KG
- Laserliner -
Möhnestraße 149, 59755 Arnsberg, ເຢຍລະມັນ
ໂທ: +49 2932 638-300, ແຟັກ: +49 2932 638-333
[email protected]
Umarex GmbH & Co KG
Donnerfeld 2
59757 Arnsberg, ເຢຍລະມັນ
ໂທ: +49 2932 638-300, ແຟັກ: -333
www.laserliner.com
Laserliner - ໂລໂກ້Laserliner Condense Spot XP - ce

ເອກະສານ / ຊັບພະຍາກອນ

Laserliner Condense Spot XP [pdf] ຄູ່ມືຜູ້ໃຊ້
Condense Spot XP

ອອກຄໍາເຫັນເປັນ

ທີ່ຢູ່ອີເມວຂອງທ່ານຈະບໍ່ໄດ້ຮັບການຈັດພີມມາ.