VEVOR 15000 Lumen Three-Head LED Work Light with Tripod Stand

ແນະນຳ

Thank you for choosing the VEVOR 15000 Lumen Three-Head LED Work Light. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your work light. Please read this manual thoroughly before use and retain it for future reference.

ຄໍາແນະນໍາຄວາມປອດໄພ

• ຄວາມປອດໄພທາງໄຟຟ້າ: ໃຫ້ແນ່ໃຈວ່າແຫຼ່ງພະລັງງານກົງກັບ voltage requirements of the light. Do not operate with damaged cords or plugs. Always unplug the light before cleaning or maintenance.
• ການຈັດວາງ: Position the tripod on a stable, level surface to prevent tipping. Avoid placing the light near flammable materials.
• ຄວາມຮ້ອນ: Although LED lights generate less heat than traditional halogen, the light heads can still become warm during operation. Avoid touching the light heads directly when in use.
• ຄວາມຕ້ານທານນ້ໍາ: This product is IP65 rated for water and dust resistance, suitable for outdoor use in various weather conditions. However, avoid submerging the unit in water.
• ເດັກ​ນ້ອຍ​ແລະ​ສັດ​ລ້ຽງ​: ເກັບຮັກສາໄຟເຍືອງທາງໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະ ສັດລ້ຽງ.
• ການ​ນໍາ​ໃຊ້​ຈຸດ​ປະ​ສົງ​: Use this product only for its intended purpose as a work light. Do not modify the unit.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ການ​ຍົກ​ເລີກ​ການ​ຫຸ້ມ​ຫໍ່​:

• 1 x Three-Head LED Work Light Assembly
• 1 x Tripod Stand
• 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
• 1 x 35mm Bolt
• ໄລປະຕູຂະ ໜາດ 4 x 25 ມມ
• ຂະ ໜາດ 1 x Hex Wrench

ສິນຄ້າເກີນview

The VEVOR LED Work Light features three independently adjustable light heads mounted on a height-adjustable tripod stand, providing versatile illumination for various tasks.

Image: The VEVOR 15000 Lumen Three-Head LED Work Light fully assembled on its tripod stand.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• ຄວາມສະຫວ່າງສູງ: 15,000 lumens output for wide area illumination.
• ປັບອຸນຫະພູມສີໄດ້: 6000K-6500K for clear, bright white light.
• Independent Light Heads: Each of the three light heads can be individually switched and adjusted for angle.
• ຂາຕັ້ງສາມາດປັບຄວາມສູງໄດ້: Extends from 43.31 inches (110 cm) to 70.87 inches (180 cm).
• ການກໍ່ສ້າງທົນທານ: ລະດັບ IP65 ກັນນ້ໍາແລະຂີ້ຝຸ່ນສໍາລັບການນໍາໃຊ້ນອກ.
• ສາຍໄຟຍາວ: 10.83 ft (3.3 m) power cord for extended reach.

Image: Illustration showing the 15,000 lumens brightness and 6000-6500K adjustable color temperature of the VEVOR LED Work Light.

Image: Diagram illustrating the multi-angle independent adjustment of the three light heads (180° vertical and horizontal), showing 70 LEDs per light head and the extra-long 10.83 ft power cord.

Image: Illustration of the height-adjustable tripod stand, demonstrating its stable design and showing the adjustment range from 43.31 inches (minimum) to 70.87 inches (maximum).

Image: The VEVOR LED Work Light demonstrating its rugged construction and IP65 waterproof and dustproof rating in a rainy outdoor environment.

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. Unpack ອົງປະກອບ: Carefully remove all parts from the packaging and verify against the 'Package Contents' list.
2. ປະກອບຂາຕັ້ງຂາຕັ້ງກ້ອງ: Extend the legs of the tripod stand until they are fully spread and stable. Secure any locking mechanisms on the tripod legs.
3. Attach Light Bar to Tripod: Place the light bar assembly onto the top of the tripod stand. Align the mounting holes. Use the provided 35mm bolt and hex wrench to secure the light bar to the tripod.
4. ຫົວແສງທີ່ປອດໄພ: The three light heads are pre-attached to the light bar. Ensure they are securely fastened.
5. ປັບຄວາມສູງ: ຜ່ອນການປັບຄວາມສູງ clamps on the tripod pole, extend the pole to the desired height (between 43.31 in and 70.87 in), and securely tighten the clamps.
6. Position Light Heads: Adjust the angle of each light head vertically and horizontally as needed. The individual switches are located on each light head.
7. ເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cord into a suitable electrical outlet. Ensure the outlet meets the product's power requirements.

ຮູບພາບ: ສໍາເລັດ view of the VEVOR LED Work Light, illustrating the assembled tripod stand and the three light heads with their wiring.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ/ປິດ: Once plugged in, use the individual switch located on each light head to turn it on or off.
2. ປັບມຸມແສງ: Each light head can be independently rotated 180 degrees vertically and horizontally to direct light precisely where needed.
3. ປັບຄວາມສູງ: To change the height of the light, loosen the clamps on the tripod pole, adjust to the desired height, and re-tighten the clamps ຫນັກແຫນ້ນ.
4. ການປັບຄວາມສະຫວ່າງ: The light provides a fixed brightness of 15,000 lumens. There is no adjustable brightness feature on this model.

ຮູບພາບ: Examples of the VEVOR LED Work Light in use, demonstrating its versatility for both indoor tasks like auto repair and outdoor applications such as construction.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Disconnect the power before cleaning. Wipe the light heads and stand with a soft, damp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການເກັບຮັກສາ: When not in use, fold the tripod stand and store the work light in a dry, cool place away from direct sunlight.
• ການກວດກາສາຍໄຟ: Regularly inspect the power cord for any signs of damage, fraying, or cuts. If damaged, discontinue use and replace the cord by a qualified technician.
• fasteners: Periodically check all bolts and clamps to ensure they are tight and secure.

ການແກ້ໄຂບັນຫາ

ຂໍ້ມູນຈໍາເພາະ

Image: Diagram illustrating the dimensions and key specifications of the VEVOR LED Work Light, including item model number, rated power, brightness, color temperature, LED quantity, power cord length, net weight, and single light dimensions.

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This VEVOR product comes with a 2-year warranty from the date of purchase. For warranty claims, technical support, or replacement parts, please contact VEVOR customer service. Keep your purchase receipt as proof of purchase.

ສຳລັບຂໍ້ມູນເພີ່ມເຕີມ, ເຂົ້າເບິ່ງຮ້ານ VEVOR ຢ່າງເປັນທາງການ: ຮ້ານ VEVOR ໃນ Amazon