BioloMix 2000g Electric Grain Grinder Mill Instruction Manual

1. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ

Please read all instructions carefully before operating the BioloMix 2000g Electric Grain Grinder Mill. Retain this manual for future reference.

• ຄວາມປອດໄພທາງໄຟຟ້າ: ໃຫ້ແນ່ໃຈວ່າການສະຫນອງພະລັງງານກົງກັບ voltage specified on the grinder. Do not operate with a damaged cord or plug. Keep the appliance away from water or other liquids.
• ຄວາມເໝາະສົມຂອງວັດສະດຸ: This grinder is designed for dry materials only. Do not grind wet, fresh, oily, or sticky substances such as peanuts, walnuts, or meat, as this can damage the blades and motor.
• ຄວາມປອດໄພຝາ: The grinder will only operate when the lid is securely fastened. Do not attempt to open the lid or reach into the grinding chamber while the machine is operating.
• ການປ້ອງກັນການໂຫຼດເກີນ: The unit features an overload protector. If the motor overheats or is overloaded, the machine will automatically stop. Allow it to cool for 5-10 minutes before pressing the overload protector button to resume operation.
• ເດັກ​ນ້ອຍ​ແລະ​ສັດ​ລ້ຽງ​: ຮັກສາເຄື່ອງໃຊ້ໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະສັດລ້ຽງ.
• ທໍາຄວາມສະອາດ: Always unplug the grinder from the power outlet before cleaning or maintenance.

2. ຜະລິດຕະພັນເກີນview

Familiarize yourself with the components of your BioloMix Electric Grain Grinder Mill.

ຮູບພາບ 1: BioloMix 2000g Electric Grain Grinder Mill with labeled components: Lock, Metal Handle, Stainless Steel Lid, Chamber, On/Timer, Fasten Switch, Overload Protection, Motor.

ອົງປະກອບລວມ:

• Electric Grain Grinder (Main Unit) x1
• Spare Blade x5
• Spare Carbon Brush x2
• ແປງລ້າງ x1
• Blades Opener x1
• ຄູ່ມືຜູ້ໃຊ້ x1
• ໝາກນັດ x1
• Upper Blade x1
• Mains Cover x1
• ສະກູ x4
• Carbon Covers Blade Opener x4

ຮູບພາບ 2: BioloMix 2000g Electric Grain Grinder Mill with dimensions and included accessories.

3. ການຕິດຕັ້ງແລະການນໍາໃຊ້ຄັ້ງທໍາອິດ

1. ແກະກ່ອງ: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. ກວດກາ: ກວດເບິ່ງເຄື່ອງ grinder ສໍາລັບອາການໃດໆຂອງຄວາມເສຍຫາຍ. ຢ່າໃຊ້ຖ້າເສຍຫາຍ.
3. ສະອາດ: Before first use, clean the grinding chamber and blades with the provided cleaning brush. Wipe the exterior with a damp ຜ້າ. ໃຫ້ແນ່ໃຈວ່າທຸກພາກສ່ວນແຫ້ງຫມົດກ່ອນການນໍາໃຊ້.
4. ການຈັດວາງ: Place the grinder on a stable, flat, and dry surface. Ensure adequate ventilation around the unit.
5. ການເຊື່ອມຕໍ່ພະລັງງານ: ສຽບສາຍໄຟເຂົ້າໄປໃນບ່ອນສຽບໄຟຟ້າທີ່ເຫມາະສົມ.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ເພື່ອການຂັດທີ່ມີປະສິດທິພາບ:

1. ກະກຽມວັດສະດຸ: Ensure your material is completely dry. Break larger pieces into smaller ones if necessary.
2. Load Material: Open the lid and carefully pour the dry material into the grinding chamber. ສຳຄັນ: The material must cover the long blade in the middle, but should not exceed 2/3 of the tank capacity. 1/2 of the tank is the optimal fill level.


ຮູບພາບ 3: Loading dry material into the grinding chamber.

3. ຝາປິດທີ່ປອດໄພ: Close the stainless steel lid firmly and engage the lock mechanism. The grinder will not operate if the lid is not properly secured.
4. ຕັ້ງເວລາ: Use the 'On/Timer' dial to set the desired grinding time. For most grains, 30 seconds is sufficient for fine powder. Harder materials may require 2-3 minutes. The maximum continuous working time is 5 minutes.
5. ເລີ່ມ​ຕົ້ນ​ການ​ຂັດ​: Press the start button. The grinder will operate for the set duration.
6. ຂະບວນການຕິດຕາມກວດກາ: The grinding process generates heat, which is normal.
7. ກວດສອບຄວາມລະອຽດ: After the timer completes, wait for the blades to stop completely before opening the lid. Check the fineness of the ground material. If a finer consistency is desired, repeat the grinding process for a shorter duration.

ຮູບພາບ 4: Grinding performance for various materials and times.


ຮູບພາບ 5: Examples of grinding results for different spices and grains.

8. ການຖອກເທ: Utilize the 270-degree swing feature to conveniently pour out the ground material.


ຮູບພາບ 6: The 270-degree swing type design for easy pouring.

5. ການບໍາລຸງຮັກສາແລະການທໍາຄວາມສະອາດ

ການເຮັດຄວາມສະອາດແລະການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນການປະຕິບັດທີ່ດີທີ່ສຸດແລະອາຍຸຍືນຂອງເຄື່ອງປັ່ນຂອງທ່ານ.

1. ຖອດປລັກ: ຖອດເຄື່ອງປັ່ນທຸກຄັ້ງອອກຈາກປລັກສຽບໄຟກ່ອນທີ່ຈະເຮັດຄວາມສະອາດ.
2. Empty Chamber: Remove all ground material from the chamber.
3. Clean Chamber and Blades: Use the provided cleaning brush to remove any residue from the grinding chamber and blades. For stubborn residue, a slightly damp cloth can be used, but ensure the chamber is completely dry before next use. Do not immerse the main unit in water.


ຮູບພາບ 7: Close-up of the 3-layer stainless steel blades.

4. ການອະນາໄມພາຍນອກ: Wipe the exterior of the grinder with a clean, dry cloth.
5. ການປ່ຽນແຜ່ນໃບ: If blades become dull or damaged, use the blades opener to carefully replace them with the spare blades provided. Refer to the included components list for spare parts.
6. ການປ່ຽນແປງກາກບອນ: If the motor performance decreases, the carbon brushes may need replacement. Use the carbon covers blade opener to access and replace the carbon brushes.
7. ການເກັບຮັກສາ: Store the grinder in a dry, cool place when not in use.

6. ການແກ້ໄຂບັນຫາ

ອ້າງອີງໃສ່ພາກນີ້ສໍາລັບບັນຫາທົ່ວໄປແລະການແກ້ໄຂຂອງພວກເຂົາ.

ຮູບພາບ 8: Location of the overload protector button.

7. ຂໍ້ມູນຈໍາເພາະ

ຮູບພາບ 9: High-speed copper motor details.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or any inquiries regarding your BioloMix 2000g Electric Grain Grinder Mill, please refer to the contact details provided with your purchase documentation or visit the official Biolomix webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.