UXLXLK PAPR ຄູ່ມືຜູ້ໃຊ້ລະບົບຫາຍໃຈ

ແນະນຳ

The UXLXLK Powered Air Purifying Respirator (PAPR) System is designed to provide comprehensive breathing protection in environments containing solid particles, organic gases, and other airborne contaminants. This full-face gas mask respirator actively draws in outside air through a built-in blower system, filters and purifies it, and then delivers it to the mask, ensuring a fresh breathing environment. It is ideal for applications such as tactical use, spray painting, and protection against dust, vapors, and chemicals.

ສ່ວນປະກອບຂອງຜະລິດຕະພັນ

The UXLXLK PAPR Respirator System includes the following main components:

• Full Face Respirator Mask
• 40mm Activated Carbon Filter
• ໜ່ວຍເຄື່ອງເປົ່າລົມ
• Two Air Supply Hoses
• Adjustable Head Harness
• Waist Belt for Blower Unit

ຄໍາແນະນໍາການຕິດຕັ້ງ

1. Charge the Blower Unit: Connect the blower unit to a power source using the provided charging cable. The charging time is approximately 3 hours, providing up to 7 hours of continuous operation when fully charged.
2. Attach the Filter: The blower unit has one RD40 connector. Screw the 40mm Activated Carbon Filter securely onto this connector. Ensure it is tightly sealed to prevent air leakage.

   

3. Connect Air Supply Hoses: Attach one end of an air supply hose to the blower unit's output port and the other end to the inlet port on the full face mask. Ensure both connections are secure. If using two hoses, connect the second hose to the remaining port on the blower and the other inlet on the mask.

   

4. Adjust Head Harness: Place the full face mask on your head. Adjust the 5-point head harness and head mesh cap to achieve a snug yet comfortable fit. The flexible rubber and mesh design should lay smoothly beneath head protection like hoods or helmets.
5. Position Blower Unit: The blower unit is designed to be portable and lightweight. It can be fixed on your waist using the provided belt, ensuring it does not impede your work.

   

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ການ​ກວດ​ກາ​ກ່ອນ​ການ​ນໍາ​ໃຊ້​: Before each use, inspect the mask for any damage, ensure all connections (filter, hoses) are secure, and verify the blower unit is adequately charged.
2. Donning the Mask:
   • Hold the mask by the head harness straps.
   • Place your chin into the chin cup of the mask.
   • Pull the head harness over your head, ensuring the mask is centered on your face.
   • Tighten the straps evenly, starting from the bottom straps, then the middle, and finally the top straps, until a secure but comfortable seal is achieved. Do not overtighten.
3. ການ​ກວດ​ກາ​ປະ​ທັບ​ຕາ​: Perform a positive and negative pressure seal check.
   • Positive Pressure Check: Close the exhalation valve with your palm and gently exhale. The mask should slightly bulge away from your face, indicating a good seal.
   • Negative Pressure Check: Close the filter inlets with your palms and inhale gently. The mask should pull inward towards your face, indicating a good seal.
4. ເປີດໃຊ້ເຄື່ອງເປົ່າລົມ: Once the mask is properly donned and sealed, turn on the blower unit. Gentle airflow will begin to circulate purified air into the mask, maintaining a fresh breathing environment.
5. ໃນ​ລະ​ຫວ່າງ​ການ​ນໍາ​ໃຊ້​: The system provides continuous purified air, reducing breathing resistance. The ergonomic design ensures comfort for extended periods of use.

ບໍາລຸງຮັກສາ

Proper maintenance ensures the longevity and effectiveness of your UXLXLK PAPR Respirator System.

• ການທົດແທນການກັ່ນຕອງ: The 40mm Activated Carbon Filter is designed for high-efficiency filtration. Replace the filter regularly based on usage and exposure to contaminants. Easy disassembly allows for quick filter replacement.

  

• Mask Cleaning: After each use, especially in contaminated environments, clean the full face mask.
  • Disconnect the hoses and remove the filter.
  • Wipe down the mask's exterior and interior with a damp ຜ້າແລະການແກ້ໄຂສະບູ່ອ່ອນໆ.
  • ລ້າງໃຫ້ສະອາດດ້ວຍນ້ໍາສະອາດ.
  • Allow all components to air dry completely before reassembly or storage.
• Blower Unit Care: Keep the blower unit clean and free from dust. Do not immerse the blower unit in water.
• ການເກັບຮັກສາ: Store the respirator system in a cool, dry place away from direct sunlight and extreme temperatures.

ການແກ້ໄຂບັນຫາ

If you encounter issues with your UXLXLK PAPR Respirator System, refer to the following common troubleshooting steps:

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The UXLXLK PAPR Respirator System comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.

For any questions, concerns, or dissatisfaction with your product, please contact the manufacturer's customer support. Your satisfaction is our lifelong pursuit.

ຂໍ້ມູນຕິດຕໍ່: Please refer to the product packaging or the official UXLXLK webເວັບໄຊສໍາລັບລາຍລະອຽດຕິດຕໍ່ສະຫນັບສະຫນູນລູກຄ້າໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.