Dickson TM320 Temperature and Humidity Data Logger

1. ບົດແນະນຳ

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo Display: Clear and easy-to-read real-time measurements.
• ງ່າຍ​ທີ່​ຈະ​ນໍາ​ໃຊ້​: Intuitive interface for straightforward operation.

2. ຂໍ້ມູນຄວາມປອດໄພ

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• ໃຊ້ສະເພາະແຫຼ່ງພະລັງງານ ແລະອຸປະກອນເສີມທີ່ລະບຸໄວ້ເທົ່ານັ້ນ.
• ຢ່າພະຍາຍາມເປີດຫຼືສ້ອມແປງອຸປະກອນດ້ວຍຕົນເອງ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• Dickson TM320 Data Logger
• ຄູ່ມືແນະ ນຳ (ເອກະສານນີ້)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. ຜະລິດຕະພັນເກີນview

ຮູບ 4.1: ດ້ານຫນ້າ View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

ຮູບ 4.2: ຂ້າງ View ກັບພອດ. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

ຮູບ 4.3: ກັບຄືນໄປບ່ອນ View. Displays the battery compartment cover and keyhole slots for wall mounting.

ຮູບທີ 4.4: ທາງເທິງ View. Shows the slot for inserting an SD card for data storage and transfer.

5. ຕັ້ງຄ່າ

5.1. ການຕິດຕັ້ງຫມໍ້ໄຟ

1. ຊອກຫາຊ່ອງໃສ່ແບັດເຕີຣີຢູ່ດ້ານຫຼັງຂອງອຸປະກອນ (ເບິ່ງຮູບທີ 4.3).
2. ເລື່ອນຝາປິດຫມໍ້ໄຟເປີດ.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. ປິດຝາປິດຫມໍ້ໄຟຢ່າງປອດໄພ.

5.2. ການເປີດເຄື່ອງເບື້ອງຕົ້ນ

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. ການຕິດຕັ້ງອຸປະກອນ

The TM320 can be placed on a flat surface or mounted on a wall:

• ການຈັດວາງພື້ນຜິວ: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• ຕິດຝາ: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. ການດໍາເນີນງານ

6.1. ຄວາມເຂົ້າໃຈໃນການສະແດງ

The jumbo display provides real-time information:

• ການອ່ານປະຈຸບັນ: Shows the live temperature or humidity value.
• ໜ່ວຍ: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• ຕົວຊີ້ວັດຫມໍ້ໄຟ: ສະແດງອາຍຸແບັດເຕີຣີທີ່ເຫຼືອ.
• CH (ຊ່ອງທາງ): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. ການທໍາງານຂອງປຸ່ມ

• ປຸ່ມ MIN/MAX: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• ປຸ່ມປຸກ: ກົດເພື່ອ view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• ປຸ່ມບັນທຶກ: Press to manually save a data point.

6.3. ການຕັດໄມ້ຂໍ້ມູນ

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. ຕັ້ງໂມງປຸກ

The device features audio/visual alarms for out-of-range conditions.

1. ກົດຄ້າງໄວ້ ປຸກ ຈົນກວ່າໂໝດການຕັ້ງຄ່າສັນຍານເຕືອນຈະຖືກເປີດໃຊ້ງານ.
2. ໃຊ້ MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. ໃຊ້ ບັນທຶກ button to adjust the alarm threshold values.
4. ກົດ ປຸກ ອີກເທື່ອໜຶ່ງເພື່ອຢືນຢັນ ແລະອອກຈາກໂໝດການຕັ້ງຄ່າ.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's website for software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. ບໍາລຸງຮັກສາ

7.1. ທໍາຄວາມສະອາດ

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. ການທົດແທນຫມໍ້ໄຟ

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. ການເກັບຮັກສາ

ເມື່ອບໍ່ໄດ້ໃຊ້ເປັນເວລາດົນ, ໃຫ້ຖອດແບັດເຕີຣີອອກ ແລະ ເກັບຮັກສາອຸປະກອນໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມທີ່ຮຸນແຮງ.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Webເວັບໄຊ: www.dicksonlogger.com