JM Bluetooth Symphony Controller
“
SPECIFICATIONS
This set is fitted with symphony LED bulbs. Operates on 5V
USB.
PRODUCT USAGE INSTRUCTIONS
Installation
- Hang the star horizontally first.
- Untie each LED string.
- Plug the USB.
LED Bluetooth Symphony Controller
Download App Software
Please search LED LAMP in major Appcenters, or scan below QR
code.
- Download the LED LAMP APP with your mobile phones by scanning
the QR code on user manual or search the LED LAMP APP in iPhone APP
store or Google play store. - After the APP is downloaded successfully, you need to turn on
Bluetooth function on your phone firstly, then plug in the strip
light, then open the APP. Your APP will pair with the strip light
automatically and you can control it.
APP Instruction
On the homepage interface, pull down to refresh, the APP will
automatically search for nearby devices. After finding the device,
click the device icon to enter the light control interface. You can
also click the button in the upper right corner, select the device
and enter the light control interface.
LED DMX 00-XXXX( With voice control) LED DMX 01-XXXX( No voice
control )
FOR SAFETY’S SAKE
Caution: Any changes or modifications to this
device not explicitly approved by the manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 0cm between the
radiator and your body.
FAQ
Q: How do I reset the LED Bluetooth Symphony Controller?
A: To reset the controller, simply unplug it from the power
source and plug it back in after a few seconds.
Q: Can I connect multiple sets of lights to one
controller?
A: It is recommended to use one controller per set of lights for
optimal performance and control.
“`
INSTRUCTIONS
IMPORTANT INSTALLATION
Please read the following carefully to ensure the satisfactory and safe operation of these lights.
SPECIFICATIONS
This set is fitted with symphony LED bulbs. This set operates on 5V USB.
INSTALLATION
1. Hang the star horizontally first 2. Untie each LED string 3. Plug the USB
LED Bluetooth Symphony Controller
Download App Software
Please search LED LAMP in major APP Please search LED LAMP in major Appcenters, or scan below QR code.
1. Download the “LED LAMP” APP with your mobile phones by scanning the QR code on user manual or search the “LED LAMP”APP in iPhone APP store or Google play store. 2. After the APP are downloaded successfully, you need to turn on Bluetooth function on your phone firstly, then plug in the strip light, then open the APP, your APP will pair with the strip light automatically and you can control it.
Android phones need to open the location function and allow permission
Unable to Connect Troubleshooting (1) Check if the power supply of the light strip is normal. (2)Check if the Bluetooth is turn on. (3)Check if there are other mobile phone are connected,Bluetooth 4.0 only support connections one to many, dose not support many to many. (4)Check APP Bluetooth setting if the phone is connected to the device, if connect, exit the APP and reopen, the APP will go to connect automatically. (5)Normal operations and can not connect, please exit the APP and reopen. (6)Exit APP, restart mobile phone, power on the strip light, reopen the APP, then them will connect automatically.
APP Instruction
On the homepage interface, pull down to refresh, the APP will automatically search for nearby devices. After finding the device,Click the device icon to enter the light control interface.You can also click the “” button in the upper right corner,Select the device and enter the light control interface. LED DMX 00-XXXX( With voice control) LED DMX 01-XXXX( No voice control )
FOR SAFETY’S SAKE
1. It is very important that the light set is NEVER DIRECTLY connected to the mains, always use the USB provided. 2. This lights set can be used indoor and outdoor. However the USB must remain indoors. 3. Disconnect the USB when not in use. 4. Avoid damage to the wiring insulation. 5. Ensure adequate airflow around each lamp. 6. Do not connect this light set electrically to any other light set. 7. Do not operate these lights in the package unless the package has been adapted for display purposes. 8. Do not allow any plastic part to come into contact with heat or flame.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Documents / Resources
 | Linhai JM Bluetooth Symphony Controller [pdf] Instruction Manual 2BRUM-JM, 2BRUMJM, jm, JM Bluetooth Symphony Controller, JM, Bluetooth Symphony Controller, Symphony Controller, Controller |