Lezyne LZ7 CO2 Pressure Drive CFH User Manual

Pressure Drive CFH

Lezyne LZ7 CO2 Pressure Drive CFH 1

Remove hose from pump handle

Lezyne LZ7 CO2 Pressure Drive CFH 2

Match Presta or Schrader valve with the correct end of the chuck; attach opposite end of the hose onto pump barrel

Lezyne LZ7 CO2 Pressure Drive CFH 3

Thread matching end of chuck onto OPEN Presta or Schrader valve, pump to inflate

CAUTION: Contents under pressure. Do not puncture or heat above 120F/49C. Do not inhale or discharge toward face or body. Keep cartridge and dispenser out of reach of children. Do not leave in enclosed vehicle as rupture may occur do to overheating and may cause injury.

*NOTE—FOR PRESTA VALVES WITH A REMOVABLE VALVE CORE: Before use with pump, remove valve core and apply small amount of LOCTITE thread locker to valve core threads. Reinstall valve core and securely tighten. Let dry for 24 hours before first use.

CO2 Flex Hose (CFH)

CO2 Flex Hose 1

Thread matching end of chuck onto OPEN Presta or Schrader valve

CO2 Flex Hose 2

Fully thread CO2 cartridge into hose to puncture

CO2 Flex Hose 3

Unthread cartridge 1/2 turn to release CO2

CAUTION: Extra CO2 may be released from the system when removing the hose

Lezyne LZ7 CO2 Pressure Drive CFH User Manual – Download [optimized]
Lezyne LZ7 CO2 Pressure Drive CFH User Manual – Download

Leave a comment

Your email address will not be published. Required fields are marked *