About Your New Label Maker
With your new DYMO LetraTag® label maker, you can create a wide
variety of high-quality, self-adhesive labels. You can choose to print
your labels in many different font sizes and styles. The label maker
uses DYMO LetraTag (LT) 12 mm label cassettes. LT cassettes are
available in multiple colors of plastic and metallic tape, and in white
Visit www.dymo.com for information on obtaining labels and accessories for your label maker.
Please complete the warranty registration card and return it to the appropriate Customer Support address within seven days. Visit www.dymo.com/registration for details or to register online.
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker is powered by standard batteries. To save power, the label maker will automatically turn off after two minutes of inactivity.
To clean the print head
1. Remove the label cassette.
2. Remove the cleaning tool from inside the label compartment cover.
If you do not have a cleaning tool, contact DYMO Customer Care (http://support.dymo.com).
3. Gently wipe the padded side of the tool across the print head. See Figure 6.
Review the following possible solutions if you encounter a problem while using your label maker.
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the following information with your feedback:
• Product name, model number, and User Guide page number
• Brief description of instructions that are inaccurate or unclear,
areas where more detail is needed, and so on
We also welcome your suggestions about additional topics you
would like to see covered in the documentation.
Send email messages to: firstname.lastname@example.org
Please keep in mind that this email address is only for
documentation feedback. If you have a technical question, please
contact Customer Support.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:
US FCC Class B Compatibility Safety
– EN 60950, IEC 950, UL 1950 EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;
– EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) –
Information Technology equipment, Immunity Characteristics Emissions
– EN 61000-6-3: Electromagnetic Compatibility (EMC) – Part 6: Generic Standards
– Section 3: Emission standard for residential, commercial and light industrial environments. RoHS 2002/95/EC
Jabra freeway manual ABOUT YOUR JABRA FREEWAY A Answer/end button Tap to answer/end call B FM button Tap to activate…
Logitech K800 Keyboard Manual Getting started with Logitech® Wireless Illuminated Keyboard K800 Contents Your Keyboard is now ready for use.Optional:…
SoundPARA Nano Earbuds Manual MANUFACTURER Shenzhen SoundSOUL Information Technology Co.,LTD Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District,…
Soundpeats Q12 Plus Manual MANUFACTURER Shenzhen SoundSOUL Information Technology Company Limited Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua…
Soundpeats TrueCapsule Earbuds Manual MANUFACTURER Shenzhen SoundSCHR Information Technology Company Limited Location: Room 1308-1309, Building B, Huhal Square, Chuangye Road,…
Whirlpool WHER25 Manual Model WHER25 How to install, operate and maintain your Reverse Osmosis Drinking Water System Do not return…