Categories: Lenco

Lenco LFM-220BK Dual Matrix RGB party LED lights User Manual

Lenco LFM-220BK Dual Matrix RGB party LED lights

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

  1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
  2. Install in accordance with the supplied user manual.
  3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can
    only be used in moderate climates. Extremely cold or warm environments
    should be avoided. Working temperature between 0° and 35°C.
  4. Avoid using the device near strong magnetic fields.
  5. Electrostatic discharge can disturb normal usage of this device. If so, simply
    reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
  6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
  7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
  8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
  9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
  10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
  11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
  12. Keep away from animals. Some animals enjoy biting on power cords.
  13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based Liquids. To remove severe stains, you may use a damp cloth with dilute detergent.
  14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
  15. The rating label has been marked on the bottom or back panel of the device.
  16. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
  17. This product is intended for non professional use only and not for commercial or industrial use.
  18. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
  19. Never remove the casing of this device.
  20. Never place this device on other electrical equipment.
  21. Do not allow children access to plastic bags.
  22. Only use attachments/accessories specified by the manufacturer.
  23. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
  24. If the product is delivered with power cable or AC power adaptor:
    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • he socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
  25. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  26. Caution about the use of Batteries:
    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.
  27. Never look directly into the light source. Danger of damage to the eyes or even blindness in extreme circumstances!
  28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just
      2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  29. Caution about the use of Batteries:
    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

Overview

  1. Fog liquid tank with screw-cap
  2. Wired Control connector
  3. Sound Control Sensitivity adjustment
  4. Sound pickup
  5. AC INPUT: AC 230V~,50/60Hz. (If the fuse is blown you can exchange it with A new FUSE type T6.3A 250V 5x20mm)
  6. POWER Switch: LIGHT, OFF, LIGHT & FOG
  7. Mounting Bracket
  8. Carrying handle
  9. Dual Light
  10. Fog nozzle
  11. Bracket Adjustment Knob
  12. Lid
  13. AUTO: The Animations follow the music beat Automatically
  14. SPEED 1: The Animations speed level 1
  15. LOVE: Select Animation ” LOVE”
  16. Manual: Press and hold to spray fog, release to stop the fog output
  17. 5S: Press spray fog 5 seconds.
  18. 15S: Press spray fog 15 seconds.
  19. 20S: Press spray fog 20 seconds.
  20. 10S: Press spray fog 10 seconds.
  21. COUNT DOWN: Start COUNT DOWN
  22. REP: Press select repeat animation, ” A L”, means repeat all, ” S I” means repeat one, ” R A” means randomly 17 18
  23. SPEED 3: The Animations speed level 3
  24. SPEED 2: The Animations speed level 2
  25. Light ON/OFF
  26. This green LED indicates that the unit has reached the operating temperature necessary to produce fog.
  27. Press this button to spray fog. 28. This red LED indicate that the unit is producing fog

Dimensions

OPERATING

Accessories included

INSTALLATION
Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
The device should be located on a secure, solid surface such as the floor. The machine can operate in any orientation from 45 degrees upwards to 45 degrees downwards. Take precautions to avoid Liquid spills if the machine is oriented at an angle.
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

Precautions/ safety warnings

  • The LFM-220 was developed for private use only, link parties, disco party etc.
  • The LFM-220 is only approved for a mains connection up to 230 VAC 50/60 Hz
  • Regular breaks during operation will increase the lifetime of the LFM-220.
  • Take care that no cables are lying around. You would endanger your own safety and also the safety of a third party.
  • Keep the LFM-220 dry and keep it away from water or high humidity. It could reduce the isolation of the device and cause short circuit and/or electric shocks.
  • When using the LFM-220 fog machine you have to ensure that there is still a good visibility of at least 10m.
  • Don’t operate the device during thunderstorms. Surge voltages can damage the device. Unplug the LFM-220 from the power supply during thunderstorms.
  • Keep Surrounding objects at a safe distance of >1m
  • Keep the device away from children and never operate it unattended.
  • Never aim the nozzle directly on people; the ejected fog is very hot!
  • Never use flammable substances, oil, gas, perfumes, etc. in your fog fluid.
  • Never aim the nozzle on open fire or flammable objects.
  • Make sure to fill the LFM-220 with fog fluid in time. If the machine is operated without fluid it can cause damage to the pump or the heating block.
  • When removing the Fog fluid, first unplug the device from the power supply.
  • Never drink the fog fluid. If this does happen, please contact a doctor. If the fluid came in contact with the eyes, immediately rinse with a lot of water.

Fog Operating Filling the unit
NOTICE! Possible damages caused by unsuitable fog liquid. Warning: don’t use Oil based Haze fluids. These will damage the LFM-220
First, make sure the unit is disconnected from the mains Open the screw-cap of the liquid tank and fill in the fog Liquid. Make sure that no fog Liquid is spilled or gets into the device. The easiest way is using a funnel. The tank capacity is 1.0 litre. Make sure the little filter of the tank hose is immersed into the smoke fluid. Firmly screw the cap back onto the tank The tank hose opening in the cap is NOT fluid tight. When transporting the LFM-220 firstly remove the unused smoke fluid to prevent smoke fluid coming out and damaging the LFM-220

Turning on the unit

NOTICE! Fire hazard Do not operate the LFM-220BK unattended. Connect the device to the mains and switch the device to “Light &FOG” with the Power switch. Allow the unit heat up 5 ­ 6 minutes As soon as the required operating temperature is reached, the green LED on the wired control will light up, meaning the device is operational. Operating: When operating the fog machine, always ensures that there is sufficient fog liquid in the liquid tank to avoid no-load running. Operation with an empty liquid tank can lead to overheating and permanent damage of the pump

WARNING: When the fog machine is in use don’t touch the top of the casing and the Fog nozzle on the front since they will get hot. Never aim the fog nozzle directly on people within a range of 50cm when in use. The ejected fog is very hot! Turning the unit off Allow the LFM-220BK to keep unused for several minutes before switching the.

Wired Control
Press and hold the “RED” button on the wired control to spray the fog. When the green led is off, you have to wait until the unit’s temperature is high enough before You can spray fog

Remote Control

  • Press the 5S button to spray fog for 5 seconds
  • Press the 10S button to spray fog for 10 seconds
  • Press the 15S button to spray fog for 15 seconds
  • Press the 20S button to spray fog for 20 seconds
  • Press and hold the MANUAL button to spray fog, release the button to stop the fog output.

Warning about protection bag
Do not leave the plastic protection cover on the unit when the FOG machine is working!

Maintenance
Do not allow the fog machine to become clogged. After every 40 hours of continuous operation, clean the machine with clean water at intervals to prevent the machine from being blocked. If it is blocked, it can be cleaned with white vinegar. It is also recommended to use white vinegar for three or two months. The recommended cleaning procedure is as follows.

  1. Unplug the product from power.
  2. Remove all fog Liquid from the machine.
  3. Add some cleaning solution (white vinegar) to the tank until the fluid reaches the first \ vertical marking indicator on the back
  4. Connect the product to power and allow it to warm up.
  5. Run the unit in a well-ventilated area until the tank is almost empty. Do not allow the pump to run dry.
  6. Refill with fog Liquid to continue using the fog. Run the machine briefly to clear any remaining cleaning solution from the pump and heater.

Operating the Animation lights 

Turning the unit on
Connect the device to the mains.
Set the main switch of the LFM-220BK to “Light” on with the Power switch, to operate the animation lights only.
Set the main switch of the LFM-220BK to “Light & FOG” on to operate the animation lights together with the fog machine.

Light on/off
Press the Remote control button Light on/off to turn on/off the animation lights.

Show various animations

LOVE
Press the “LOVE” button on the remote control, to show “Love”
COUNT DOWN
Press the “COUNT DOWN” button on the remote control to show “9”“8”“7”“6”“5”“4”“3”“2”“1”. Before showing the “1”, Press 5S/10S/15S/20S button to spray the fog 5/10/15/20 seconds

Selecting the speed 

  • AUTO
    Press the “AUTO” button for the Animations reacting to the music automatically
  • SPEED 1
    Press the SPEED 1 button, the Animations move at level 1
  • SPEED 2
    Press the SPEED 2 button, the Animations move at level 2
  • SPEED 3
    Press the SPEED 3 button, the Animations move at level 3

Pairing a new RF remote control
If the remote control is defective and you got it replaced or you want to use the Lenco PA-360 remote control, it has to be paired with your LFM-220BK first.
Follow the below procedure:

  1. Press and hold the Light ON/OFF button on the new remote control for 3 seconds, to start the pairing mode
  2. The lights will display “OK”, when pairing is successfully completed.
  3. Now the new remote control is ready for use.

Physical

  • Length ……………………………………………………. 344mm
  • Width……………………………………………………… 290mm
  • Height…………………………………………………….. 250mm
  • Dry weight ………………………………………………. 4.6kg

Performance

  • Operating time…………………………………………. continuous
  • Fog heater warm up time ………………………….. approx. 6 min
  • Fog full charge use time……………………………. 50-60min
  • Fog heating Power …………………………………… 900 Watt

RF remote control

  • Battery……………………………………………………. CR-2025
  • Control Frequency……………………………………. 433 Mhz

Liquid system

  • Capacity of liquid tank ………………………………. 1.0 Litre
  • Compatibility…………………………………………….Water based Glycol/Glycerol fog fluid

Light system

  • Light source…………………………………………….. Dual 8×8 Matrix RGBW party LED lights
  • Animations move speed……………………………. AUTO/Speed 1/Speed 2/Speed 3
  • Play & Repeat …………………………………………. AL/R1/RA
  • COUNT DOWN……………………………………….. 9 8 7 6 5 4 3 2 1

Thermal

  • Ambient temperature………………………………… 0°C to 35°C
  • Electrical
  • AC230 V±10%, 50/60 Hz

Guarantee

  • Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
  • Important note: It is not possible to send products that need repairs to Lenco directly.
  • Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
  • This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit support.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.
Website: www.lenco.com/LIDL
Email: support@lenco.com

Documents / Resources

Lenco LFM-220BK Dual Matrix RGB party LED lights [pdf] User Manual
LFM-220BK Dual Matrix RGB party LED lights, LFM-220BK, Dual Matrix RGB party LED lights, RGB party LED lights, LED lights, lights

References

Share

Recent Posts

Amazon Basics CY83RR-7 Portable Digital Radiator Heater

Amazon Basics CY83RR-7 Portable Digital Radiator Heater IMPORTANT INSTRUCTIONS Read these instructions carefully and retain…

8 mins ago

UPLIFT DESK mon041 Enfield Single Monitor Arm User Manual

mon041 Enfield Single Monitor Arm Enfield Single Monitor Arm SKU: MON041 Package Contents Base Lower…

8 mins ago

Honeywell TN-182 Transportable Area Monitor User Manual

TN-182 Transportable Area Monitor Technical Note TN-182 11/04/TC BASICS OF WIRELESS SECURITY INTRODUCTION RAE Systems…

16 mins ago

BOSCH NDV-8502-RX 2 Megapixel Indoor Network Dome Camera Installation Guide

NDV-8502-RX 2 Megapixel Indoor Network Dome Camera 1 | 2 | 3 | 4 |…

21 mins ago

HK INSTRUMENTS DPGPS-Series Filter Alerts Instruction Manual

DPGPS-Series Filter Alerts FILTER ALERTS DPG/PS Series INSTALLATION INSTRUCTIONS INTRODUCTION WARNING Thank you for choosing…

26 mins ago

ATHMILE GZ-B2W20220108 3-Piece Round Wood Top Counter Height Kitchen Gray Dining Instruction Manual

GZ-B2W20220108 3-Piece Round Wood Top Counter Height Kitchen Gray Dining

41 mins ago