Document

Lenco-logo

Lenco DAR-045 DAB+-FM Radio with CD Player and Bluetooth

 

Lenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-product

CAUTION
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND

  1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
  2. Install in accordance with the supplied user manual.
  3.  Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.
  4.  Avoid using the device near strong magnetic fields.
  5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
  6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
  7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
  8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
  9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
  10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
  11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
  12. Keep away from animals. Some animals enjoy biting on power cords.
  13. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
  14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
  15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
  16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause interference resulting in failing of data.
  17. The rating label has been marked on the bottom or back panel of the device.
  18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
  19. This product is intended for non professional use only and not for commercial or industrial use.
  20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
  21. Never remove the casing of this device.
  22. Never place this device on other electrical equipment.
  23.  Do not allow children access to plastic bags.
  24. Only use attachments/accessories specified by the manufacturer.
  25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
  26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
  27. If the product is delivered with power cable or AC power adaptor:
    1. If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    2. Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    3. Unplug this device during lightning storms or when unused for a long period.
    4. The socket outlet must be installed near the equipment and must be easily accessible.
    5. Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    6. Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    7. Devices with class 2 construction do not require an earthed connection.
    8. Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    9. Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
  28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    1. “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    2.  [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.\
    3. Keep new and used batteries away from children.
    4. If the battery compartment does not close securely, stop using the product and keep it away from children.
    5.  If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
  29. Caution about the use of Batteries:
    1. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    2. Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    3.  Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    4. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    5. Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    6. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    7. Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

  • Unpack all parts and remove protective material.
  • Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

WARNING

Class 1 Laser Product

Warning

  1. Do not touch the lens.
  2. When participating in the traffic listening to a personal music player can make the listener less aware of potential dangers such as approaching cars.
  3. To prevent possible hearing damage, do not listen at high volume levels for long periods.

ACCESSORIES

  1. AC/DC power adaptorLenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-1
  2. Remote controlLenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-2
  3. Instruction manualLenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-3

Warning

  • Do not ingest the battery, Chemical Burn Hazard.
  • This product contains a coin/button cell battery. *If corn/button cell battery is swallowed, it can severe internal burns in just 2 hours and can lead to death.
  • Keep new and used batteries away from children.
  • If the battery compartment does not close securely, stop using the product and keep it away from children.
  • If you think batteries might have swallowed or placed inside any part of the body, seek immediate medical attention.

Caution

  • Danger of explosion if battery is incorrect replaced.
  • Replace only with the same or equivalent type

FRONT PANELLenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-4

  1. IR RECEPTION AREA
  2. DISPLAY Display the unit operation status and information
  3. CD DISC COMPARTMENT DOOR

TOP PANELLenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-5

  1. – VOLUME +
    1. Adjust the main volume
  2. STANDBY
    1. Press to turn on the unit. Press again to turn off and go to Standby mode
  3. SOURCE
    1. Press this key to choose different modes: DAB+/FM/CD/AUX/Bluetooth
  4. CLOCK SET
    1. In Standby mode, press to proceed the set up of the clock
  5. MENU/INFO
    1. DAB+/FM: Press to display station information. Press and hold to enter the Menu for setting change
  6. MONO/ST./PLAY MODE
    1. FM: Press to toggle between stereo and force mono when FM station is received
    2. CD: Press to change to different playback modes of operaton
  7. PRESET/MEMORY
    1. DAB+/FM: Press to proceed the preset stored channel recall. Press and hold to proceed the preset channel saving
  8. SELECT/
    1. DAB+/FM: Press to select the change setting
    2. CD: Press to stop the playback
    3. BT: Press and hold to disconnect the current connection and start to search another new Bluetooth device
  9. SCAN/
    1. DAB+: Press to start auto-scanning all the available DAB+ stations
    2. FM: Short press to scan the next available FM station. Press and hold to start auto-scanning all the available FM stations CD/BT: Press to toggle between pause and resume playback
  10. OPEN/CLOSE
    1. Press to open/close the CD compartment door
    1. DAB+: Press to display the next station information
    2. FM: Short press to tune to a different frequency. Press and hold to scan the next available station
    3. CD/BT: Press to search to the previous/next track
  11. DC IN 9V
    1. Plug the AC adaptor into this jack
  12. AUDIO IN
    1. Connect to external audio player

REMOTE CONTROLLenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-6

  1. STANDBY
  2. NUMERIC BUTTONS
  3. MEM/PROG
  4. PREVIOUS /TUNE
  5. EQUALIZER
  6. REPEAT
  7. X-BASS
  8. INFO
    1. SCAN
    2. MENU
  9. BT PREVIOUS
    1. BT NEXT
    2. BT PLAY/PAUSE
  10. STOP
    1. CD PLAY/PAUSE
  11. VOLUME + VOLUME –
  12. MUTE
  13. RANDOM
  14. CH-
  15. NEXT /TUNE
  16. ENTER
  17. MONO/ST
  18. CH+
  19. SLEEP
  20. TIMER
  21. CLOCK SET
  22. OPEN/CLOSE
  23. SOURCE

Remote Control Operation
A CR2025 battery is already installed in the remote control unit. Before using, pull out the battery insulation sheet as shown below.Lenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-7

To replace a new battery, please refer to the figure shown below. When inserting a battery, be sure to do so in the proper direction.Lenco-DAR-045-DAB+-FM-Radio-with-CD-Player-and-Bluetooth-8

  • If the remote control conflicts with other devices, the operation will be affected.
  • Do not simultaneously press buttons on the unit and the remote control.
  • Avoid using two remote controls at the same time as it will cause a malfunction.
  • Use only CR-2025 size batteries.
  • If there is battery leakage, clean the remote control thoroughly before replacing batteries.
  • Do not short two terminals of the batteries. Dispose old batteries in a suitable place.

BASIC OPERATION
Plug the AC/DC power adaptor into a AC mains outlet and the other end of the cable into the DC IN 9V jack at the back of the unit. The display will show “SCAN TIME”. The unit is now updating the time from the broadcaster. Wait for a while until it is finished and the real-time will be display. Press the STANDBY button to turn on the unit. To turn off, press the STANDBY button again.

DAB+/FM/CD/AUX/Bluetooth
Press the SOURCE button to choose the different sources.

Volume Control
Press the VOLUME +/- buttons on the unit or the VOL-/+ buttons on the remote control to change the volume.

Adjusting the Antenna
The antenna wire at the rear panel of the unit should be extended to ensure a good DAB+/FM reception. Alter the antenna position for the best reception.

DAB+ OPERATION
The first time the DAB+ mode is selected, it will automatically scan for available DAB+ stations. Wait until the scanning has finished. The display will show the scanning progress. After scanning it will tune to the first station.

Auto Scan

  1. Turn on the unit in DAB+ mode.
  2. Press the SCAN button to start auto-scanning the available stations.

Manual Scan

  1. Turn on the unit in DAB+ mode.
  2. Press the MENU button to access the menu control.
  3. Press the PREVIOUS or NEXT  button until “Manual tune” is displayed and then press the ENTER button.
  4. Press the PREVIOUS or NEXT button to select the desired channel (5A-13F).
  5. Press the ENTER button to confirm.
  6.  To select another channel (5A-13F), press the PREVIOUS or NEXT  button and then press the ENTER button to confirm.
  7. When the station is found, press the ENTER button to select.
  8. To quit manual scan, press the MENU button.

Tuning
Press the TUNE or TUNE button to display the information of the next station. Then press the ENTER button to tune to this station within a few seconds.

Storing DAB+ Presets

You can save up to 20 DAB+ stations.

  1. Tune to the station you wish to store.
  2. Press and hold the MEM/PROG button. Display icon “PROG” will flash.
  3. Press the PREVIOUS button to the preset number that you want to store. Then press the ENTER button to save.

Recall Stored DAB+ Presets

  1. Press the CH- or CH+ button directly tune to the preset channel.
  2. Or press the [MEM/PROG] button once. Preset channel number is displayed. Then press the PREVIOUS or NEXT button to the preset number that you want to recall and press the ENTER button to confirm.
  3. Or to directly recall the preset channel by using the numeric buttons, press the numeric buttons [1], [2], …, [0]. For example when the button [3] is pressed and then follow by pressing the ENTER button, it will tune to preset channel 3. Or when the button [1] and then button [2] are pressed and then follow by pressing the ENTER button, it will tune to preset channel 12.

Displaying DAB+ Station Information

There are several types of information as listed below. To change the display information, press the INFO button repeatedly.

  1. Radio Text scrolling
    Shows music titles or program details provided by the broadcaster.
  2. Signal Bar
    Transmission signal level. The more characters are displayed, the stronger the signal being received. To improve the reception adjust the antenna position.
  3. Program Type (PTY)
    Type of program provided by the broadcaster.
  4. Multiplex Name
    Displays name of multiplex to which the current station belongs.
  5. Frequency
    Current channel frequency.
  6. Signal Error Rate
    Shows the error rate. The larger this value, the more errors it receives. To improve the reception, adjust the antenna position.
  7. Audio Bit Rate
    This is the current channel audio Bitrate.
  8. Time
    Displays the time provided by the radio station.
  9. Date
    Displays the current date provided by the radio station.

OTHER DAB+ MENU OPERATION
Press the MENU button to access the menu control. Then press the PREVIOUS or NEXT button for different options as described below.

Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the broadcaster and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling factor to this level. There are three levels of compression:

  • DRC HIGH:  Maximum compression as sent with the transmitted service
  • DRC LOW:   Set to 1/2 that of the sent transmitted service
  • DRC OFF: No compression
  1. Press the MENU button to access the menu control.
  2. Press the PREVIOUS or NEXT  button until “DRC” is displayed and then press the ENTER button.
  3. Press the PREVIOUS or NEXT button to select the DRC value and then press the ENTER to confirm.
  4. Press the MENU button to exit the menu control.

Note

  1. Not all DAB+ broadcasts are able to use DRC function. If the broadcast does not support DRC then the DRC setting in the unit will have no effect.
  2. After you have adjusted the DRC level the sound may be louder.

Prune
This function removes inactive stations.

  1. the Press MENU button to access the menu control.
  2. Press the PREVIOUS or NEXT button until “PRUNE” is displayed and then press the ENTER button.
  3. Press the PREVIOUS or NEXT button to select “PRUNE Y” and then press the ENTER button to prune the unit.
  4. Press the MENU button to exit the menu control.

FM RADIO OPERATION

Auto Scan

  1. Turn on the unit in FM mode.
  2. Press and hold the SCAN button to start auto-scanning and saving the available stations (max. 20 storage).

Manual Scan

  1. Press the TUNE or TUNE  button repeatedly to tune to a different frequency
  2. Alternatively press and hold the TUNE button to automatically search to the next available station.Z

Storing FM Presets
You can save up to 20 FM stations. or TUNE

  1. Tune to the station you wish to store.
  2. Press and hold the MEM/PROG button. Display icon “PROG” will flash.
  3. 3. Press the PREVIOUS or NEXT button to the preset number that you want to store. Then press the ENTER button to save.

Recall Stored FM Presets

  1. Press the CH- or CH+ button to tune directly to the preset channel.
  2. Or press the [MEM/PROG] button once. The preset channel number is displayed. Then press the PREVIOUS or NEXT button to the preset number that you want to recall and press the ENTER button to confirm.
  3. Or to directly recall the preset channel by using the numeric buttons, press the numeric buttons [1], [2], …, [0]. For example when the button [3] is pressed and then follow by pressing the ENTER button, it will tune to preset channel 3. Or when the button [1] and then button [2] are pressed and then follow by pressing the ENTER button, it will tune to preset channel 12.

Stereo/Force Mono Selection
When receiving a Stereo FM radio station, press the MONO/ST button will switch between stereo audio and force mono audio.
Displaying FM Station Information
There are several types of information as listed below. To change the display information press the INFO button repeatedly.

  1. Radio Text
    Scrolling text which shows information about music titles or program details provided by the radio station
  2. Program Type (PTY)
    Type of program provided by the broadcaster
  3. Frequency
    Current channel frequency
  4. Audio Type
    Stereo or Mono
  5. Time
    Displays the time provided by the radio station.
  6. Date
    Displays the current date provided by the radio station.

OTHER DAB+ MENU OPERATION
Press the MENU button to access the menu control. Then press the PREVIOUS or NEXT button for different options as described below.

Scan Setting

  1. Press the MENU button to access the menu control.
  2. Press the PREVIOUS button until “SCAN” is displayed and then press the ENTER button.
  3. Press the PREVIOUS button to toggle between “STRONG” and “ALL” and then press the ENTER button confirm.  When the “STRONG” is selected, only the strong stations are detected. Scanning will ignore the noisy stations. When “ALL” is selected, all stations will be detected during FM scanning even if the radio station is a bit noisy.
  4. The next time doing a FM scan the unit will search for the stations based on this confirmed setting.

Audio Setting

  1. Press the MENU button to access the menu control.
  2. Press the PREVIOUS or NEXT button until “AUDIO” is displayed and then press the ENTER button.
  3. Press the PREVIOUS or NEXT button to toggle between “STEREO” or “MONO” selection and then press the ENTER button  confirm.

CD OPERATION (Only CD, MP3 Not Support)

Loading and Playing CD Disc
Press the SOURCE button to go to CD mode. Press the OPEN/CLOSE button to eject the CD compartment door. Install a disc with the CD label side facing up. Press the OPEN/CLOSE button again to close the CD compartment door. After reading, the total number of tracks will be shown on the display. It will automatically start to play.

Play/Pause Control
To pause playback press the CD PLAY/PAUSE button. Press the button again to resume playback.
Stop Control
To stop playback press the STOP button.

Skip Track
During playback press the PREVIOUS or NEXT button to search to the previous or next track.
Direct Select Track

Press the numeric buttons [1], [2], …, [0] to directly select the desired track to play. For example when the button [3] is pressed and then follow by pressing the ENTER button, it will jump to track 3 to play. Or when the button [1] and then button [2] are pressed and then follow by pressing the ENTER button, it will jump to track 12 to play.

High-Speed Music Search 
During playback press & hold the PREVIOUS or NEXT button to start high-speed searching. When you release the PREVIOUS or NEXT button normal speed playback will resume.
Repeat Playing

During playback press the REPEAT button once the display shows flashing “ ”. This is Repeat One mode. The current track will be played repeatedly. Press the REPEAT button again the display shows “ ” without flashing. This is Repeat All mode. All tracks will be played repeatedly. Press the REPEAT button again to resume normal playback.
Random Play
During playback press the RANDOM button to play music in random order. The display will show “RAN”. Press the RANDOM button again to resume normal playback.
Programmed Playback
This unit can be programmed to play a sequence of selected tracks.

  1. Insert a disc and in stop mode press the MEM/PROG button. “P01” is shown with “01” flashing in “T-00” shown.
  2. Press the PREVIOUS or NEXT button to select the desired track.
  3. Press the MEM/PROG button to save the desired track.
  4. Repeat steps 2-4 to program up to 20 programmed tracks.
  5. Press the CD PLAY/PAUSE button to play according to the programmed track.
  6. To clear the program play, press the STOP button twice or change to another mode.
  7. During program play you can also do the “Repeat One” or “Repeat All”. But during the program play, random play is not supported.

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the unit to your Bluetooth device.

  1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show “BT”. It will start searching and will display a flashing “PAIRING”.
  2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the search until “Lenco DAR-045” is found. Select “Lenco DAR-045” on the Bluetooth device to make connection. Enter the pass code “0000” if required.
  3. After successfully paired the unit will display steady “BT AUDIO”.
  4. You can now start playing music from your smartphone wirelessly to the speaker.
  5. You can press the BT PLAY/PAUSE button to pause or resume the playback.
  6. You can press the BT PREVIOUS or BT NEXT button to search to the previous or next song.
    1. Press and hold the button on the unit will disconnect the current connection and start to search another new Bluetooth device.

AUX IN
This allows you to connect the sound from an external player through your unit.

  1. Plug a 3.5mm audio cable (not included) into your external player line out and the other end into the AUDIO IN jack.
  2. Press the SOURCE button to enter AUX mode. Display shows “AUX”.
  3. Start your external player to play music.
  4. The unit plays the sound.

EQ OPERATION/X-BASS

You can enjoy different EQ sound effect modes. Press the EQUALIZER button to go to different sound effects from FLAT/ROCK/CLASSIC/POP/JAZZ. You can also boost the bass effect of the music. Press the X-BASS button will toggle the X-Bass effect between On and Off.

Note: When X-Bass is enabled, the EQ sound effect will be disabled. Pressing EQUALIZER button will only show BASS ON without any EQ effect. To resume the EQ sound effect, press the X-BASS button to turn off first.

SLEEP FUNCTION

  1. When the unit is switched on, press the SLEEP button repeatedly to select a sleep duration from either SLEEP 00 (Off), 90, 80, 70, 60, 50, 40, 30, 20 or 10 minutes.
  2. When the sleep timer is zero, the unit will turn off automatically.
  3. To cancel the sleep function, press the STANDBY button to turn off the unit. Or press the SLEEP button repeatedly to select “SLEEP 00”.

CLOCK SETUP

  1. Turn off the unit in Standby mode.
  2. Press the CLOCK SET button to set the clock. It will display “24H”.
  3. Press the PREVIOUS or NEXT button to adjust the hour display format between 24H or 12H. Press the SELECT button (or ENTER button on the remote) to confirm.
  4. Press the PREVIOUS or NEXT button to adjust the hour. Press the SELECT button (or ENTER button on the remote) to confirm.
  5. Press the PREVIOUS or NEXT to button to adjust the minute. Press the SELECT button (or ENTER button on the remote) to finish the clock set.

Note

  • The time set may automatically be overridden by the DAB+ or FM station real-time information.
  • When the unit is turned on, pressing the CLOCK SET button will display the time on the display for a few seconds.

TIMER ON/OFF SETUP

  1. Turn off the unit in Standby mode.
  2. Press and hold the TIMER button to set the timer on/off. It will display “ONCE” with a flashing symbol .
  3. Press the PREVIOUS or NEXT button to toggle between “ONCE and “DAILY”. Press the ENTER button to confirm.
  4. It will display “TIME ON” for a moment. Then while it displays the flashing hour digits, press the PREVIOUS or NEXT button to set the on timer hour value. Press the ENTER button to confirm.
  5. Then it displays the flashing minute digits. Press the PREVIOUS or NEXT button to set the on-timer minute value. Press the ENTER button to confirm
  6. It will display “TIME OFF” for a moment. Then while it displays the flashing hour digits, press the PREVIOUS or NEXT button to set the off timer hour value. Press the ENTER button to confirm.
  7. Then it displays the flashing minute digits. Press the PREVIOUS or NEXT button to set the off-timer minute value.
  8. It will display the wake up source. Press the PREVIOUS or NEXT the ENTER button to confirm. button to set the timer on the source (DISC, DAB+, FM). Press the ENTER button to confirm
  9. It will display the wake up volume level. Press the PREVIOUS or NEXT button to set the timer on volume level. Press the ENTER button to finish the timer on/off setup.
  10. The timer schedule is now activated. A timer symbol will be shown without flashing the display.

Note: Press the TIMER button will deactivate the timer schedule. Press the TIMER button again will reactivate the timer schedule together with the schedule detail show up on the display.

LANGUAGE SETUP

You can set the language of the unit.

  1. Turn on the unit in DAB+ mode or FM mode.
  2. Press the MENU button to access the menu control.
  3. Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.
  4. Press the PREVIOUS or NEXT button until “LANGUAGE” is displayed and then press the ENTER button.
  5. Press the PREVIOUS or NEXT button to toggle between different languages. Select your desired language and then press
  6. Press the MENU button to exit the menu control.

SOFTWARE VERSION CHECK

You can check the software version of the unit.

  1. Turn on the unit in DAB+ mode or FM mode.
  2. Press the MENU button to access the menu control.
  3. Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.
  4. Press the PREVIOUS or NEXT button until “SW VER” is displayed and then press the ENTER button to show the software version number.
  5. Press the MENU button to exit the menu control

FACTORY RESET

This function resets the unit to the original factory settings.

  1. Turn on the unit in DAB+ mode or FM mode.
  2. Press the MENU button to access the menu control.
  3. Press the PREVIOUS or NEXT button until “SYSTEM” is displayed and then press the ENTER button.
  4. Press the PREVIOUS or NEXT button until “RESET” is displayed and then press the ENTER button.
  5. Press the PREVIOUS or NEXT button until “RESET Y” is displayed and then press the ENTER button to reset the unit.

ENERGY SAVING

Due to ErP requirement and protect the environment, the unit will turn off to the standby mode automatically once no music has been playing around 15 minutes. When the unit is power off due to ErP, you can press the STANDBY button to turn on the unit again.

Trouble Shooting

No power

  • Ensure that the main cable is securely connected.
  • Ensure that the unit is switched on.

The remote control does not function

  • Use the remote control near to the unit.
  • Point the remote control at the remote control sensor on the unit.
  • Replace the batteries in the remote control with new ones.
  • Remove any obstacles between the remote control and the unit.

The unit does not respond when pressing any buttons

Remove the batteries (when inserted) and remove the powercord for a minute. Then reinsert the batteries.

No sound output

Turn up the volume with VOL+.

I can’t find the Bluetooth name of this unit on my Bluetooth device for Bluetooth pairing

  • Ensure that the unit is switched on.
  • Ensure that the Bluetooth function is activated on your Bluetooth device.
  • The unit has a Bluetooth function that can receive a signal within 10 metres.

Disc in place but the unit won’t play

  • Ensure that the disc label is facing up.
  • Ensure that the disc is clean.
  • PAUSE mode may be activated, deactivate it.
  • Disc may be damaged or dirty; check and clean the disc.

DAB+/FM reception

  • Ensure the antenna wire is fully extended.
  • Electrical interference in your home can cause poor reception. Move the unit away from them (especially those with motors and transformers).

The unit switches off automatically during play

Increase the volume level of your connected sound source (DVD player/TV etc.)

Sound interference coming from the speakers in Speakers

Move any wireless devices (mobile phone, bluetooth device etc.) away from the unit.

TECHNICAL SPECIFICATIONS

  • DAB+ radio frequency range              174.928-239.2 MHz
  • FM radio frequency range                  87.5-108 MHz
  • Bluetooth frequency range                 2.402-2.480 GHz
  • AC adaptor input                               100-240V~ 50/60Hz 0.5A MAX
  • AC adaptor output                             DC 9V 2A
  • Speaker output power Bluetooth       2 x 5 W
  • Aux in                                               V2.1 + EDR
  • Remote control battery (included)    CR2025 x 1pcs
  • Unit dimension (L x D x H)            350 x 83 x 226 mm
  • Total weight                                    1.4 kg

The specification presents only as a reference. The value of weight and size are approximations. Our product is improved ceaselessly and the specification and function may be changed without prior notice.

Power supply adaptor: (For EU only)

  • Manufacturer:      Shenzhen Guijin Technology Co., Ltd.
  • Model Number:  AK18WG-0900200V

Use only original AC adaptor
Use only the power supply listed in the user instructions.

Information Value and precision
Manufacturer’s name or trade mark commercial registration number and address Shenzhen Guijin Technology Co., Ltd.

3rd Floor, 72 Building, Songxin Industrial, Hongxing Community, Songgang Street, Bao’an, Shenzhen, GuangDong, China

Model identifier AK18WG-0900200V
Input voltage 100-240V
Input AC frequency 50/60Hz
Output voltage 9.0V
Output current 2.0A
Output power 18.0W
Average active efficiency ³ 85%
Efficient at low load (10%) 75%
No-load power consumption £ 0.1W

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device

This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via [email protected]

Service

For more information and helpdesk support, please visit www.lenco.com Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands

Documents / Resources

Lenco DAR-045 DAB+-FM Radio with CD Player and Bluetooth [pdf] User Manual
DAR-045 DAB -FM Radio with CD Player and Bluetooth, DAR-045, DAB -FM Radio with CD Player and Bluetooth

References

Leave a comment

Your email address will not be published. Required fields are marked *