Led2 BOX Ceiling Point LED

Product Information
The product is a lighting fixture with different dimming options. It has multiple models with different specifications:
- Model 1: Box
- Model 2: LL 6
- Model 3: N N
- Model 4: (EN)
CAUTION!
The product is designed to be installed by a technician or a qualified person. It is important to turn off the main power before installation to prevent electric shock. The lampshade/diffuser, if present, should be handled carefully as it is fragile. Only a technician or qualified person can replace the integrated LED light source.
The product is compatible with different dimming methods:
- Model 1: PUSH DIM
- Model 2: DALI/PUSH DIM
- Model 3: DALI DIM
- Model 4: TRIAC DIM
The product operates with an input voltage of 220-240V and a frequency of 50/60Hz.
Product Usage Instructions
- Before installation, ensure the main power is turned off to avoid electric shock.
- If the lamp has a lampshade/diffuser, handle it carefully as it is fragile.
- For models with an integrated LED light source, only a technician or qualified person can perform the replacement.
- Select the appropriate model based on the desired dimming method:
- Model 1: PUSH DIM
- Model 2: DALI/PUSH DIM
- Model 3: DALI DIM
- Model 4: TRIAC DIM
- Connect the product to a power source with an input voltage of 220-240V and frequency of 50/60Hz.
- Follow the specific wiring instructions for each model:
- Model 1: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver.
- Model 2: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. For DALI functionality, connect the DA/L and DA/N wires.
- Model 3: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. For DALI functionality, connect the DA wires.
- Model 4: Connect the L (line) and N (neutral) wires to the corresponding terminals on the driver. Use a phase-cut Triac dimmer for dimming control. For trailing edge dimming, connect the Trailing edge wire. For leading-edge dimming, connect the Leading edge wire.
- After installation, turn on the main power to activate the product.
Note: The manufacturer is not responsible for any incorrect use or assembly of its products.
The installation may only be carried out by a technician



CAUTION!
Turn off the main power before proceeding with the installation in order to prevent possible shock. The installation may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.
CONNECTION – DIMMABLE VERSION – OPTIONAL

CAUTION!
Turn off the main power before proceeding with the installation in order to prevent possible shock. The installed -tion may only be carried out by a technician or a qualified person. If the lamp has a lampshade/diffuser, handle it carefully as it is fragile. With an integrated LED light source, only a technician or a qualified person can make the replacement. The manufacturer is not responsible for the incorrect use and assembly of its products.
Documents / Resources
![]() | BOX Ceiling Point LED |
References
- ÚVOD - architectural lightingwww.led2.eu
- User Manualmanual.tools

