Wireless Ear Buds Earbuds Bluetooth Headphones-Complete Features/User Guide


Wireless Ear Buds Earbuds Bluetooth Headphones


  • FEATURES: Adjustable
  • PLAYBACK TIME: 42 hours
  • STREAMING MUSIC: 6 hours
  • BLUETOOTH VERSION: Bluetooth 5.2
  • WEIGHT: 45 grams


It has Superior Sound Quality. The Wireless Headphones have a 14mm vibrating diaphragm and HiFi rendering technology, with a sound frequency of up to 40kHz that allows you to discover a whole new world of crystal-clear music. As if you’re in the middle of the stage, with the performer right next you. It gives you Clear Hands-Free Communication. Each pair of Bluetooth Earplugs features two microphones: one to decrease ambient noise and the other to improve call quality. Can block up to 80% of background noise and produce a maximum depth of noise reduction impact of 38dB. Wireless headsets ensure that your call is as smooth and interruption-free as possible.

It has Up to 42 Hours of Playtime. The Bluetooth earbuds can play for up to 6 hours. After just 10 minutes of charging with the included USB-C charging cable, you’ll have 2 hours of gameplay, and with the charging case, you’ll have up to 42 hours. Wireless charging is also possible by just placing the charging cover on a wireless charger. It has 5.2 Bluetooth & Easy Touch. The Bluetooth Headphone uses a touch design instead of a physical button, which substantially minimizes the pressure on the ears. Without lifting up your phone, softly tap on the earbud to skip songs, adjust volume, answer/reject calls, and activate Siri. Bluetooth 5.2 technology allowed for a steadier connection and quicker pairing.

IPX5 Waterproof & Innovative Fit Design Wireless earbuds can fit and stay secured in ear canal even with intense movement thanks to a lighter (3g) and ergonomic design, as well as an innovative sport redesign for a pleasant fit. The Bluetooth earbuds are resistant to liquids such as spills and excessive sweat, and may be used for travel, sports, home, and business.


  • Quick charging case x 1
  • USB-C cable x 1
  • Wireless Bluetooth headset x 1
  • pair, User manual x 1


  • Turn on the power supply for the earbuds. Some earphones include built-in batteries.
  • Activate the audio source or increase the volume.
  • Clean your earbuds.
  • Disconnect and reconnect wired earbuds.
  • With wireless earbuds, check the Bluetooth connection.
  • Connect the earbuds to a different source of audio.

Frequently Asked Questions

  • When my wireless earphones are fully charged, how do I know?
    When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.
  • What’s wrong with my wireless earbuds?
    If your Bluetooth devices won’t pair, it’s probably because they’re out of range or not in pairing mode. Try rebooting your devices or having your phone or tablet “forget” the connection if you’re encountering persistent Bluetooth connection issues. For more stories, go to Business Insider’s homepage.
  • On wireless earbuds, where is the power button?
    Place the earphones in the charging case and push the power button on the front of the case to charge them.
  • How long do wireless earphones last after being charged?
    The latest wireless headphones can be fully charged in around 1-2 hours, or even less if the capacity is modest. On a partial charge of 15-20 minutes, certain devices can run for roughly 2-3 hours.
  • When not in use, can I store wireless earbuds in a charging case?
    The battery will gradually decline over time, which is OK; however, charging it every time it drops below 20% charge will greatly extend the battery life of your wireless earbuds. Leaving your wireless earphones in their case while not in use is actually better for the battery life of your headphones.
  • Can I charge my earbuds while the case is charging?
    Yes, you can charge both your earbuds and your case simultaneously. Simply put your earbuds inside the case and connect your charging wire to the case.
  • Why are my wireless earbuds only working on one side?
    Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.
  • Why aren’t my earbuds working?
    It’s unlikely that your Bluetooth headphones are defective. It only needs to be reset. In fact, a quick factory reset can cure a variety of problems with a Bluetooth headset, including: If your Bluetooth headset won’t connect to your smartphone or laptop.
  • What is the best way to charge my earbuds case?
    You must first place the buds in the case before connecting the USB cable. Because cheaper headphones do not come with an adaptor, charge the case using the USB port on your laptop or PC. If your earbuds are inside, they will be charged as well. A tiny USB cord is included with each pair of earbuds.
  • Without a charger, how do you charge wireless earbuds?
    You may charge wireless earphones using a power bank or by plugging them into laptops or desktops. The USB cord can be used to connect the earbuds to the laptop.

Recent Posts

ROWENTA RH9638 X-Force Flex 8.60 Suction Brush User Guide

RH9638 X-Force Flex 8.60 Suction Brush INSTRUCTIONS FOR USE FR Guide de l'utilisateur - EN…

1 min ago

2021 Alliance Avenue Owners Manual

2021 Alliance Avenue

2 mins ago

BOSCH GLL 2 Professional Self-Leveling Cross-Line Laser Instruction Manual

GLL 2 Professional Self-Leveling Cross-Line Laser Page 1 Thursday, May 20, 2010 1:04 PM…

7 mins ago

2021 Alliance Valor Owners Manual

2021 Alliance Valor

10 mins ago

PHILIPS AC2958 2000i Series Air Purifier User Manual

AC2958 2000i Series Air Purifier © 2021 Philips Domestic Appliances Holding B.V. All rights reserved.…

11 mins ago

BOSCH GBM 13-2 RE Professional Corded Electric Rotary Drill Instruction Manual

GBM 13-2 RE Professional Corded Electric Rotary Drill Page 1 Tuesday, November 17, 2009…

17 mins ago